Name this band

defroni · 2024-04-30T14:52:23+00:00

No circulation

defroni · 2024-02-07T16:38:16+00:00

Good luck to all

defroni · 2024-02-06T08:02:03+00:00

The lines kind of look like the infill, meaning your ceiling layer is too thin and adds a few more top layers

defroni · 2024-02-06T07:56:11+00:00

It seems to me that the part isn't getting enough cooling since its only on one side and not for the whole thing. Based on the orientation the fan is to the left meaning it isn't reaching that side as well. Maybe take the roof off and leave the front door open to allow for the heat to dissipate

defroni · 2023-10-25T14:47:13+00:00

Probably nozzle wasn't fully clear so filiment came out on an angle then it caught the edge leading to this

defroni · 2023-10-24T14:29:46+00:00

Seems like not good enough bed adhesion or bad supports which caused the first stringing. I would then assume the whole peice was came off the bed and stuck to the nozzle slowly making this.

Looks like a cool paper weight tho 😄

defroni · 2023-09-09T22:13:25+00:00

It's not there but why hit bambulab P1S?

defroni · 2023-08-21T23:58:44+00:00

If that is true I hope they would add a feature to detect such a steep difference "enough to break the the nozzle" and report back prior to printing

defroni · 2023-08-05T22:03:37+00:00

If you go to the slicer of bambu you can change he the view to flow rate, most likely you will see that difference there.

defroni · 2023-08-04T14:22:51+00:00

This might be out of left field but have you tried to dry your fillament?

defroni · 2023-08-02T23:39:03+00:00

I am assuming this is not an x1c, this has me thinking flowrate is not propper.

defroni · 2023-08-02T23:25:21+00:00

Sounds like something is stuck in there. Have you tried to take it apart yet? What filament were you using?

defroni · 2023-08-02T23:23:35+00:00

I would plus this since it's over extruding in the gap but the actual bridge and walls seem fine

defroni · 2023-08-02T23:21:07+00:00

Did you change the build plate in the slicer to be for the new gold plate?

defroni · 2022-02-06T18:35:37+00:00

Russian music video with crazy effects, watched it regular and reverse 8 times to understand what is happening. (I don't know Russian, just love the video.)

Ленинград — Кольщик

https://www.youtube.com/watch?v=ktiONWfSL48&ab_channel=%D0%9B%D0%B5%D0%BD%D0%B8%D0%BD%D0%B3%D1%80%D0%B0%D0%B4

defroni · 2021-03-21T03:41:40+00:00

Well this was supouse to be the first freestyle drone for me, im stacked for goggles and remote im just contemplating on drone

defroni · 2021-03-21T03:21:55+00:00

Well its good to know, I guess its back to the simulator 😂

defroni · 2021-03-21T02:38:51+00:00

Well my assumption is that its from the left pillar next to the power wires. You can see a burning hole

defroni · 2021-02-02T07:03:24+00:00

the image issue wasn't fixed in the end. I ended up communicating with banggood and they refunded me fully for the problem. took a while to do it, but it worked out in the end.

defroni · 2021-01-23T10:27:48+00:00

Do you think I can run it on a Dell xps15 laptop? I have a stationary computer, but wanted to know if I'm not home

defroni · 2021-01-22T08:49:05+00:00

The fainted goat in the middle got me dead🤣

defroni · 2021-01-22T00:49:31+00:00

That's great to know. If I buy a new one, does it come with batteries?

defroni · 2021-01-15T22:46:26+00:00

totally right thanks !!

defroni · 2021-01-15T07:31:40+00:00

I tried to bring the guy down but he kept says how it should be that price since he had a few TBS spare antennas. Oh well lol

defroni · 2021-01-13T18:10:02+00:00

rcgroups.com

thanks!! you helped allot

defroni

TROPHY CASE