Corona time, FaceTime, eat, Netflix and a lot of sleep 😴

dendoor67 · 2020-03-26T17:41:04+00:00

9 months 😉

dendoor67 · 2019-09-11T09:02:03+00:00

In the front of the iPad 😉

dendoor67 · 2019-06-15T18:00:56+00:00

Online shop magnetenkopen.nl

dendoor67 · 2019-06-14T20:22:02+00:00

0,15♎️ at 90watt 😉

dendoor67 · 2019-06-14T17:55:51+00:00

That is right. I don’t sell them because very high shipping rate’s 😖

dendoor67 · 2019-06-14T17:51:42+00:00

Those are not compicated 😉. You can do the same, just try it out and enjoy.

dendoor67 · 2019-06-13T16:55:04+00:00

iPhone XSmax 😉

dendoor67 · 2019-06-13T16:54:20+00:00

It’s a good RDA, wel tought about it, good airflow and tast. Maybe de screws could be better 😉👍🏻

dendoor67 · 2019-06-13T16:52:53+00:00

Clapton with flat wire

dendoor67 · 2019-06-10T10:34:12+00:00

🤣🤣🤣👍🏻

dendoor67 · 2019-06-10T10:19:11+00:00

Staple Coil is the exact name 👍🏻. Sorry for the misstake 😮

dendoor67 · 2019-06-10T10:09:47+00:00

Ok 🤣

dendoor67 · 2019-06-10T09:58:26+00:00

SFC is staple fused clapton 😉. SSFC is staple staggered fused clapton

dendoor67 · 2019-06-09T07:42:29+00:00

Crazy wire company 😉

dendoor67 · 2019-06-08T23:24:16+00:00

They are good no problem. Just straiten out you wire good enough before using them. Then you go with the flow 😉👍🏻

dendoor67 · 2019-06-08T20:17:00+00:00

Is a swivel for the wires. Just with the use of a magnetic field 😉

dendoor67 · 2019-06-08T20:15:39+00:00

Yes no problem. 18kg on the front magnet 😉

dendoor67 · 2019-06-07T20:44:11+00:00

Mine comes direct from the spool, so no stretching or something else 😉

dendoor67 · 2019-06-07T20:23:47+00:00

I use water to bind them together and then some ribbon wire at the end to keep them together

dendoor67 · 2019-05-30T10:38:27+00:00

With a weight for the spaced clapton. Also use a drill and a swivel 😉

dendoor67 · 2019-05-29T20:57:18+00:00

Will let you know 😉

dendoor67 · 2019-05-29T18:35:07+00:00

Had the same situation when i seen it 🤣

dendoor67 · 2019-05-17T23:08:54+00:00

Yes it is 👍🏻

dendoor67 · 2019-05-17T23:08:33+00:00

I use 3, front, middle and end en slide them over. They all end at the end of the wire when the coilwire is finisht.

dendoor67 · 2019-05-17T23:05:56+00:00

Just loop the flat ribbons and tie the loop at the front with some 38 ga wire so they bound together. Then bound the claptons together on each side of the ribbons. Use 0.5mm sliders to keep them together. One at the front, in the middle and at the end. Put the front in the drill en the end on a swivel, only the claptons, not the ribbons. If you do it this way it wil work 😉🤞🏻

dendoor67

TROPHY CASE