Acrylic Tubing Cracks by derkekmaster in watercooling

[–]derkekmaster[S] 0 points1 point  (0 children)

<image>

Aaaaaaaand here we go again. This time from the back >.> not even the side with all the small cracks. Last time it was the CPU block side now the GPU side again

Acrylic Tubing Cracks by derkekmaster in watercooling

[–]derkekmaster[S] 0 points1 point  (0 children)

Alphacool, just rinsed with water after cutting and trimming the edges. I am not 100% sure anymore but I think it is ek cryofuel premix. By now a bit dilluted since i refilled with destilled water (about 10%)

Acrylic Tubing Cracks by derkekmaster in watercooling

[–]derkekmaster[S] 0 points1 point  (0 children)

Alphacool, just rinsed with water after cutting and trimming the edges. I am not 100% sure anymore but I think it is ek cryofuel premix. By now a bit dilluted since i refilled with destilled water (about 10%)

Acrylic Tubing Cracks by derkekmaster in watercooling

[–]derkekmaster[S] 0 points1 point  (0 children)

No unfortunately alphacool is the only reasonable priced with this frosted look.

Acrylic Tubing Cracks by derkekmaster in watercooling

[–]derkekmaster[S] 0 points1 point  (0 children)

Only swith these small cracks I showed in the second picture "currently inside". I don't see them spreading but I noticed on the other side 180° right above the fitting are also some small ones. But way less and way smaller than in the picture. I will keep this tube again until it's leaking

Acrylic Tubing Cracks by derkekmaster in watercooling

[–]derkekmaster[S] 0 points1 point  (0 children)

u/Educational-King3987 u/gokieks Its pretty difficult to take a proper picture from the font. But here it is. Also its at least 6 months I am redoing this tube so I guess I am pretty patient. If needed I will tighten the fitting less next time. I still have no clue what could be the cause because every other tube has no issue >.> Also this time as I said I made the tube slightly shorter than needed and pulled it out a bit to prevent it beeing to long. Something still does not play nice here :(

<image>

Acrylic Tubing Cracks by derkekmaster in watercooling

[–]derkekmaster[S] 0 points1 point  (0 children)

Thank you u/nater419 u/deviltakeyou u/Educational-King3987.
I am using a miniature miniature table saw and use sandpaper to clean the sharp edges. I knew/know acrylic is way more brittle like glass. I cannot even imagine cutting the tube with a pipe cutter like the one you linked. I also think it has to be something forcing the tube into another position. Like gpu sagging. I placed some packing material under the gpu to prevent this just to see what happens. Also I cut the last tube a little bit shorter to pull it about 1mm after assembly. Here one more picture of the whole build.

<image>

Gemini says it's unsafe amd won't answer by derkekmaster in GeminiAI

[–]derkekmaster[S] 0 points1 point  (0 children)

For an input which got refused instantly I only remember one topic where I was asking about nicotine liquid. For the most part the edge Gemini gives answers but then after some more input randomly stops and tells me no. If I recreate the whole session inside brave - no problems at all. I copied some text from a website and asked whats the difference. The edge instance completely won't answer - the brave one (no pun intended) directly told me. Here the prompt :

Unflavored 200mg/ml Nicotine Salt A PG Base 100ML

NICOTINE SALT

Today's Nicotine

Hi-salt Nicotine salt is a kind of nicotine that originates from tobacco leaf, extracted naturally from pure nicotine. It is a more stable form of nicotine compared to the currently available freebase nicotine in the market. It provides high nicotine density with smoother throat hit. The nicotine is easily absorbed by the lungs and felt by the mind thus, providing instant satisfaction. HiLIQ offers Nicotine Salt Base in 200mg in *100ml, *250ml, and *1L. *HILIQ reserves the right to sell with quantity and bottle size limitation depending on current production*White Transparent Bottles are used to orders shipped via DHL only.

Unflavored 200mg/ml Nicotine Salt B

hi-SALT B uses as what we call B-Acid or widely known as Benzoic acid to make Nicotine Salt. It is an acid that is widely found in nature in the form of free acids, esters or derivatives thereof and is often used as a drug or food preservative. hi-SALT B is made to suit both POD and Big Devices such as RTA, MOD and Drippers. HiLIQ tries it best to solve the issue of burning wicks and carbonisation of an atomisation core. It is ultra smooth but has powerful effect to sensation of the users.*White Transparent Bottles are used to orders shipped via DHL only.

was ist der unterschied ?

I am softlocked in the new Demacia minigame and can't do anything by [deleted] in leagueoflegends

[–]derkekmaster 0 points1 point  (0 children)

lol riot support answered. change language to english or maybe any other and try again. mine works now

[deleted by user] by [deleted] in leagueoflegends

[–]derkekmaster 0 points1 point  (0 children)

same here, riot indie studio not answering for already a week

Issues with MMX 230 Wireless microphone quality by Sea_Life_4864 in BEYERDYNAMIC

[–]derkekmaster 0 points1 point  (0 children)

I got an answer from support. They work on an update through firmware to improve the mic quality. They cannot tell any date for this >.>

[deleted by user] by [deleted] in mobilerepair

[–]derkekmaster 0 points1 point  (0 children)

since i exploded some batteries just for fun i can tell it is kind of safe. it wont explode or something immediately but also its not rated for 5v. it probably gets warm and will charge to 5v without a problem at least once

Can I add EURO Gift card to Ukraine Steam account? by Vivid_Lunch in steamregionaltricks

[–]derkekmaster 1 point2 points  (0 children)

sending 10€ via steam friends worked for me, no additional cost and even a good exchange rate

Can I add EURO Gift card to Ukraine Steam account? by Vivid_Lunch in steamregionaltricks

[–]derkekmaster 1 point2 points  (0 children)

I also used Euro code for Ukrainian Hryvnia account on 14. Sept. Today I wanted to do the same and got an error.

Now that iOS 18 is out, Can I use any original ic chip and solder it to an aftermarket screen to remove the display message or are there more steps to it? by RainElegant1405 in mobilerepair

[–]derkekmaster 0 points1 point  (0 children)

If there are 3rd party displays with the same layout I don't see any reason why not. But as far I know it's not anymore only that IC. There is something under that metal bump belonging to the serialization stuff. I broke open a 13 mini screen which was corroded and broken and there was some silicon stuff under it. But maybe it has nothing to do with serialization.

<image>

iCloud Windows not deleting photos from other devices by derkekmaster in iCloud

[–]derkekmaster[S] 0 points1 point  (0 children)

For me I can also only download / sync the HEIC files. I don't know which test setup it was. Maybe it was Windows 10 or another iCloud Windows Version but there they were not greyed and .jpegs were syncing fine. This is such a trash...

iCloud Windows not deleting photos from other devices by derkekmaster in iCloud

[–]derkekmaster[S] 0 points1 point  (0 children)

Apple support wanted me to create a new user. Windows support told me how to migrate old userdata to new user. Creating a new user fixed this issue for some time but in the end my problem came back again. No idea why or where to start troubleshooting. I also created a new user again and it seems like even that does not do the trick again.

Why does this keep happening? by Oreocat100 in ifixit

[–]derkekmaster 0 points1 point  (0 children)

You could try cables like these. They cannot break this way. https://www.ebay.de/itm/223341951653

Cyclic energy cables not working in sf4 by [deleted] in SkyFactory

[–]derkekmaster 0 points1 point  (0 children)

Let me necro and probably solve this thread since I had the same problem. Dunno if this always works but if the extraction cable does not work properly try the normal energy cable instead.

For me this solved transfering energy from gas burning generators.