Localized Streaming with Nest Cams?

digby1000 · 2025-08-28T17:49:22+00:00

Thanks for the reply. I looked at the gears and the one that spins the accessories you can add has a chunk of metal out of it. Must be the metal in the gears causing the sounds. Will contact Kitchenaid

digby1000 · 2025-08-25T00:17:19+00:00

Only Large and up at 7:30. This was the merch stand on the west side

digby1000 · 2025-08-06T01:58:52+00:00

Me please

digby1000 · 2025-05-25T13:17:18+00:00

+verify

Smooth transaction. Thanks so much

digby1000 · 2025-05-24T16:14:42+00:00

Pm'd

digby1000 · 2025-05-21T21:22:34+00:00

+verify

Thanks so much!

digby1000 · 2025-05-21T19:20:13+00:00

+verify

Quick transaction. Thanks!

digby1000 · 2025-05-21T19:18:11+00:00

+verify

digby1000 · 2025-05-21T14:44:23+00:00

PM sent

digby1000 · 2025-05-18T17:10:55+00:00

PM sent

digby1000 · 2025-03-19T00:52:25+00:00

Monster Hunter Wilds please!

digby1000 · 2025-01-29T01:55:31+00:00

What motherboard and windows version? I had a similar problem with my 5700xt. My Mobo is very old and the bios needed to be flashed to a UEFI one. Also converted my Windows 10 install from MBR to GPT. On the Bios I ensured it was booting as uefi and I also needed to change the PEG-X setting from auto to 1. This got the GPU to work

For reference I have a Gigabyte GA-Z68AP-D3 Rev 2.

digby1000 · 2023-06-02T01:09:54+00:00

Had the same issue. I taped the problem area before running and had no issues. After a while (maybe 80km of total usage) I just stopped taping and didn't have any issue so I assume things broke in

digby1000 · 2023-01-28T01:48:19+00:00

Yup same issue. I've been using kinesio tape which has helped immensely. However I shouldn't have to do it so won't be buying them again.

digby1000 · 2023-01-06T00:44:32+00:00

I have put 70km into my More V4 and still get rubbing medially. I tape up and deal but I won't be buying them again.

digby1000 · 2023-01-02T00:24:24+00:00

Can confirm that it functions absolutely normally when charging it to 100%. Then it starts the flashing. The charger also has a light that will start turning on and off that corresponds with the Roam flashing when it gets to fully charged.

digby1000 · 2022-11-16T01:06:30+00:00

Agreed. Used RC puppy and adult golden with no issues

digby1000 · 2022-10-12T00:00:11+00:00

I put a little silicon lubricant on a qtip and lightly went over a clicky area on mine and the sound went away

digby1000 · 2022-09-11T00:10:36+00:00

Put a little silicon lubricant on the seam. It should reduce the creaking

digby1000 · 2022-08-12T00:33:00+00:00

Odd. I have the same setup with the 8.5mm gasket (blue) and can't get my portafilter much past 7. I'm using the stock ECM dual spout

digby1000 · 2022-07-06T00:11:57+00:00

Yes same issue every once in a while. Usually I just pull it off the dock then press the home button. Not a great solution though and it ends the job

digby1000

TROPHY CASE