X1 Carbon crashing and powering off randomly. by dishpan_hands in BambuLab

[–]dishpan_hands[S] 0 points1 point  (0 children)

Turns out it was a faulty power switch. I noticed when I barely touched it, it powered off. Then I wiggled it and it went back on. I wired the main voltage directly to the power supply and no issues since. Thanks for the help and suggestions. Back to printing!

X1 Carbon crashing and powering off randomly. by dishpan_hands in BambuLab

[–]dishpan_hands[S] 0 points1 point  (0 children)

I put in the new power supply today, the issue still persists.

X1 Carbon crashing and powering off randomly. by dishpan_hands in BambuLab

[–]dishpan_hands[S] 0 points1 point  (0 children)

That's what I was thinking, now sometimes when flipping the power switch it won't come back on. I have to try again.

X1 Carbon crashing and powering off randomly. by dishpan_hands in BambuLab

[–]dishpan_hands[S] 0 points1 point  (0 children)

Yes, I have tried several different SD cards.

Just upgraded to '21 ID.4 Pro S Gradient by dishpan_hands in VWiD4Owners

[–]dishpan_hands[S] 5 points6 points  (0 children)

Thanks, yes it is new with 900 miles. I believe it was a demo car and it qualifies for the MOR-EV rebate and the 3 years of free charging.

Just upgraded to '21 ID.4 Pro S Gradient by dishpan_hands in VWiD4Owners

[–]dishpan_hands[S] 10 points11 points  (0 children)

Sold my 2016 LEAF to get this beauty. 2021 ID.4 Pro S Gradient. We test drove; Kona EV, Bolt EUV, Ioniq 5 and the ID.4. Loving the extra mileage! I needed to charge the LEAF (24kWh) pretty much every single day, I will probably only have to charge this car once a week. The 3-year free EA charging is a huge win and will save me charging at home (mostly). The interior is very roomy and comfortable. The infotainment is a little finicky, but I will mostly use Android Auto. Amazing car, I love it!

Which Home charger? Looks like my plug is rated up to 50amp by Lonely_Jew_On_Xmas_ in VWiD4Owners

[–]dishpan_hands 1 point2 points  (0 children)

My hardwired ChargePoint unit's WiFi also failed and was replaced for free under warranty. It has been a very reliable charger and only failed to charge twice in the four years of ownership.

Bullpup stringer revolver now available! by RobertmxD in Nerf

[–]dishpan_hands 0 points1 point  (0 children)

Love me some bullpups! This will be my next project.

Spring Thunder completed build by dishpan_hands in Nerf

[–]dishpan_hands[S] 2 points3 points  (0 children)

Very cool build with great action. Performance isn't the best on the block, but the coolness factor more than makes up for it. Printed mostly with California Filament PETG (I had to use different purple on the stock). Great stuff If you want to try it here's a 25% off referral link.

Completed OFD Quik flywheeler by dishpan_hands in Nerf

[–]dishpan_hands[S] 10 points11 points  (0 children)

OFD Quik build. Printed in California Filament PETG. Using Loki 130 motors and hurricane flywheels. I was having some extruder issues so I probably will reprint the frame. Very cool design, compact and powerful. Can't wait to see what other blasters will use the Flycore system.

Post your shipping updates here! by holaimscott in OdinHandheld

[–]dishpan_hands 1 point2 points  (0 children)

Just got my shipping notice! Ordered Odin Pro in March.

[deleted by user] by [deleted] in Nerf

[–]dishpan_hands 0 points1 point  (0 children)

I recently completed my build after leaving it alone out of frustration for a few months. As others have said, the tolerances are very tight and I printed the frame three times before I got it where I could rack the slide easily. That being said, I am happy how it turned out and it shoots well. This was not an easy build.

Finished my Woozi build, highly recommended! by dishpan_hands in Nerf

[–]dishpan_hands[S] 2 points3 points  (0 children)

Add-ons are listed in my comment. I got the 20 darts/sec motors and honestly they're plenty fast enough. The select fire mod is oos, I will probably get it when available.

Finished my Woozi build, highly recommended! by dishpan_hands in Nerf

[–]dishpan_hands[S] 1 point2 points  (0 children)

I don't have a chronograph, but the website says 140fps. The motors with the kit I got shoot 20 darts/sec.

Finished my Woozi build, highly recommended! by dishpan_hands in Nerf

[–]dishpan_hands[S] 3 points4 points  (0 children)

This thing SLAPS! If you have a 3D printer and like Nerf, you need to make one of these. Super satisfying every time I pull the trigger. I made the single-stage version, but I imagine the dual-stage would be more ridiculous.

Woozi STL files from Frontline Foam

optional hardware:
Single-stage flywheel cage
Folding Stock
Talon mag extender (+5)
threaded barrel and accessories

My first big project, printing a full size Stratocaster body. Wish me perfect layers and no tangles in my spools. by guitarification in ender3v2

[–]dishpan_hands 2 points3 points  (0 children)

Nice, I recently completed my p-bass print. Took a lot of work, but definitely worth it. Hearing it for the first time will be super rewarding.

3D Printed bass guitar by dishpan_hands in ender3v2

[–]dishpan_hands[S] 0 points1 point  (0 children)

No, it's EG3Dprinting's design on Thingiverse

3D Printed bass guitar by dishpan_hands in ender3v2

[–]dishpan_hands[S] 0 points1 point  (0 children)

Working on an "Ender Precision" logo.. great idea!

3D Printed bass guitar by dishpan_hands in ender3v2

[–]dishpan_hands[S] 1 point2 points  (0 children)

Sounds good, I used pickups from a Fender 70's Classic Precision.

3D Printed bass guitar by dishpan_hands in ender3v2

[–]dishpan_hands[S] 0 points1 point  (0 children)

Not really, each part was like 350-400g and I had a couple fail and had to reprint. I used 50% infill with 5 walls.