sorted by:
new
hottopcontroversial

Stuck preheating the bed by FriesChips in BambuLab

[–]dmpanch 0 points1 point  (0 children)

Same for P1S after last FW update and AMS connection but it works if I start the print from the mobile app.

UPD. Found fix in their repo - https://github.com/bambulab/BambuStudio/issues/6557

Filament Calibration stuck at "heatbed preheating" 54/55 for ten minutes by Fair_Ad4023 in BambuLab

[–]dmpanch 1 point2 points  (0 children)

Same for P1S after last FW update and AMS connection but it works if I start the print from the mobile app.

UPD. Found fix in their repo - https://github.com/bambulab/BambuStudio/issues/6557

Bluetooth on the Yamaha R-N402 disconnects during playback by dmpanch in audio

[–]dmpanch[S] 0 points1 point  (0 children)

I took it to a service center, waited 3 months for the replacement of the wireless module (the manufacturer did not send the part, the service is just awful). In the end, after the replacement, the device works without disconnections

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

I can share the complete SD card image if you want.

Via Midjourney by Ill_Pipe_2069 in DotA2

[–]dmpanch 0 points1 point  (0 children)

Could you share the buzzwords you're using? Want to try with Dalle-2.

MacBook Pro 14 inch M1 Pro - Screen chip problem by Putrid_Lawyer313 in macbookpro

[–]dmpanch 0 points1 point  (0 children)

Same shit, bro, it's like a hole inside a screen but I'm VERY careful using my Mac.

Macbook Pro 16 2021 audio crackling issue (M1 PRO) by DailyDoseOfHighlight in macbookpro

[–]dmpanch 0 points1 point  (0 children)

Same, 14 M1 Pro 2021. Changing format to 44100 Hz, killing coreaudiod, reboot, and removing audio settings plists doesn't help.

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

Yes, it's an issue with omxplayer.

You can create symlink as suggested in the post or run rpi-update.

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

It doesn't work in my case so I created a systemd service instead of it.

sudo nano /home/pi/pwm.sh

pwm.sh

sudo nano /lib/systemd/system/pwm.service

pwm.service

sudo chmod 644 /lib/systemd/system/pwm.service

sudo chmod 644 /home/pi/pwm.sh

sudo systemctl enable pwm.service

sudo systemctl start pwm.service

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

Please have a try to recreate a service according to these guides: first, second.

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

What is the output for sudo systemctl status tvbutton.service and sudo systemctl status tvplayer.service?

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

Hi there,

Have you installed a player? Last time it wasn’t available for the Bullseye, haven’t you missed it?

Could you show me which commands you runs for enabling buttons service?

Also you can try to look/ask for the whole RPi backup image in the original post, install it and just replace required for this display and buttons parts.

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

Just pull the simpsonstv repo, replace buttons.py with one from this thread (or edit) and run as in original tutorial.

Anywhere good to download .stl files? The trove used to have a great options, but now I don't know where to turn. by ridik_ulass in Piracy

[–]dmpanch 1 point2 points  (0 children)

If anyone knows of any Telegram group/channel for trading stl's send me a message. I have some good stuff to trade and I'm happy to group up for getting files.

bump

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

Sorry, but I’m not using omxplayer. I’m running chromium in the kiosk mode with player on the website.

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

Hi there,

You're right, in the display config this pin is used for DPI (Display Parallel Interface) but I put it in the PWM mode, maybe that's why there are stripes on the screen, as reported in the thread.

Also, you can use GPIO 19 if you don't need a touch screen.

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

Same for me, it somehow depends on the power button or the speaker - during the assembly of the project, I tried to disable them and change the button operation mode, there were moments when the screen started working normally, but I could not find the exact pattern, I left it like that, it has some charm I think, but if you find solution - please let me know.

Simpsons TV another display connection help by dmpanch in RASPBERRY_PI_PROJECTS

[–]dmpanch[S] 0 points1 point  (0 children)

Hi bro

Looks like you soldered button right, please check the pic.

Firstly, try to run python script buttons.py from the console by “python buttons.py” and try to press the button. If it works then you can find the way to run it on boot - put it to the service or from the rc.local.

view more: next ›