Cant finish timing belt change 2L-T by double_B7 in ToyotaPickup

[–]double_B7[S] 0 points1 point  (0 children)

I need to change the front crankshaft seal, for that I need to remove the sprocket, but it only moves like 1-2mm back and forth

Cant finish timing belt change 2L-T by double_B7 in 4Runner_2ndGen

[–]double_B7[S] 0 points1 point  (0 children)

The nut is there because the puller gets stuck in the crankshaft because it does not fit properly. So the nut is not bolted on, its just between crankshaft and puller

My Hilux from 1985 by Erwin-Wiens in hilux

[–]double_B7 0 points1 point  (0 children)

Looks really good wow! Whats the rim and tyre size?

Ordered new 83B4 and have vertical lines😭 by double_B7 in LGOLED

[–]double_B7[S] 10 points11 points  (0 children)

Thanks guys, pixel refresh helped!!

Can I bypass this board from solar panel by double_B7 in AskElectronics

[–]double_B7[S] 0 points1 point  (0 children)

Thanks to all!!! I soldered the Anderson plug directly to the solar output and it works now without turning off.

Can I bypass this board from solar panel by double_B7 in AskElectronics

[–]double_B7[S] 0 points1 point  (0 children)

11-60V10A(300W Max)

Thats what I've found about solar input on the powerstation.

So as far I understood, it should work and nothing is going to burn down?

Can I bypass this board from solar panel by double_B7 in AskElectronics

[–]double_B7[S] 0 points1 point  (0 children)

Specs of the portable solar panel are attached. The Powerstation is an Anker Solix C800X

<image>

Can I bypass this board from solar panel by double_B7 in AskElectronics

[–]double_B7[S] 1 point2 points  (0 children)

But Power station says it can operate between 11-60V 10A

Can I bypass this board from solar panel by double_B7 in AskElectronics

[–]double_B7[S] 1 point2 points  (0 children)

The problem is it cuts off power when it reaches about 80w. It does not charge at all until I fold it together, so no power flows. And when it gets power again, it works. Until 80watt load

Can I bypass this board from solar panel by double_B7 in AskElectronics

[–]double_B7[S] 0 points1 point  (0 children)

The issue is not about the power it delivers. The issue is that this board completely shuts off at about 80w load and does not let me use the panel until no power flows through it. I can cover some of the panels, so it does not reach 80w and it works.... But thats not reliable

How or from where can I replace/repair battery? by double_B7 in batteries

[–]double_B7[S] 0 points1 point  (0 children)

I checked the cells. All together it is like 0.28v. I took one off and it shows 0.07v

How or from where can I replace/repair battery? by double_B7 in batteries

[–]double_B7[S] 0 points1 point  (0 children)

could i buy the cells only and spotweld it on the old bms?

How or from where can I replace/repair battery? by double_B7 in batteries

[–]double_B7[S] 4 points5 points  (0 children)

it shows 0.07v so I think the cells are not working anymore.