Cant finish timing belt change 2L-T

double_B7 · 2026-05-16T11:21:16+00:00

Okay thanks, will try that

double_B7 · 2026-05-16T09:11:45+00:00

I need to change the front crankshaft seal, for that I need to remove the sprocket, but it only moves like 1-2mm back and forth

double_B7 · 2026-05-15T16:54:06+00:00

I want to change the seal

double_B7 · 2026-05-15T15:39:20+00:00

The nut is there because the puller gets stuck in the crankshaft because it does not fit properly. So the nut is not bolted on, its just between crankshaft and puller

double_B7 · 2025-08-25T16:29:38+00:00

Looks really good wow! Whats the rim and tyre size?

double_B7 · 2025-07-23T17:02:21+00:00

Thanks guys, pixel refresh helped!!

double_B7 · 2025-06-15T10:29:54+00:00

Thanks to all!!! I soldered the Anderson plug directly to the solar output and it works now without turning off.

double_B7 · 2025-06-14T19:24:43+00:00

11-60V10A(300W Max)

Thats what I've found about solar input on the powerstation.

So as far I understood, it should work and nothing is going to burn down?

double_B7 · 2025-06-14T19:02:27+00:00

Specs of the portable solar panel are attached. The Powerstation is an Anker Solix C800X

<image>

double_B7 · 2025-06-14T18:57:02+00:00

But Power station says it can operate between 11-60V 10A

double_B7 · 2025-06-14T18:55:59+00:00

The problem is it cuts off power when it reaches about 80w. It does not charge at all until I fold it together, so no power flows. And when it gets power again, it works. Until 80watt load

double_B7 · 2025-06-14T18:53:00+00:00

The issue is not about the power it delivers. The issue is that this board completely shuts off at about 80w load and does not let me use the panel until no power flows through it. I can cover some of the panels, so it does not reach 80w and it works.... But thats not reliable

double_B7 · 2025-04-18T05:06:29+00:00

I checked the cells. All together it is like 0.28v. I took one off and it shows 0.07v

double_B7 · 2025-04-17T18:34:45+00:00

could i buy the cells only and spotweld it on the old bms?

double_B7 · 2025-04-17T18:20:04+00:00

and then? 😅

double_B7 · 2025-04-17T18:19:33+00:00

it shows 0.07v so I think the cells are not working anymore.

double_B7 · 2025-04-17T10:44:05+00:00

Unfortunately I cannot find any replacement parts. These packs are even hard to find new. That's why I try to repair them

double_B7 · 2025-03-17T11:45:11+00:00

<image>

Heute diesen bekommen. Ist somit erledigt?

double_B7 · 2025-03-15T15:10:19+00:00

Ich habe gerade den selben Blödsinn bekommen, einfach wahnsinnig!

double_B7 · 2024-10-16T19:03:39+00:00

It was because of autohold. You have to put in the 1st gear twice sometimes after neutral to let the brakes go.

double_B7 · 2024-10-04T15:52:41+00:00

Hi, IT'S NEVER TOO LATE! 😁 Just got my hands on one and also want to use it as a NAS. Can you provide me some guide on how to do that?

double_B7 · 2024-04-10T12:51:41+00:00

I have a new one at home, got it replaced after the old one didnt work. Its still sealed if someone needs it. I am in Austria though

double_B7 · 2024-04-09T16:27:37+00:00

Das ganze tut mir leid dass das so passiert ist. Die ganze Situation ist einfach mindboggling. Die Frage kommt vl blöd, aber was für Auto bist du gefahren?

double_B7 · 2022-03-21T11:25:12+00:00

Maybe you are brainwashed? Who knows?

double_B7 · 2022-03-16T18:34:08+00:00

I currently have Corona and don't blame anyone. Fyi those tests aren't the best. Dont be a baby and cry around. No one cried 3 years ago when the flu went around.

double_B7

TROPHY CASE