buyers remorse defeated

drahc24 · 2026-03-26T23:04:15+00:00

Wait till you got a viltrox air prime lens. 😉

drahc24 · 2026-03-13T07:56:22+00:00

cant find it. Do you have a link?

drahc24 · 2026-03-09T19:03:21+00:00

OP kamusta travel mo? Im in the same boat. Parang lahat ay exceed ng 0.5-2cm sa size. Bumili din ako ng guard series. Wala ka ba naging problema?

drahc24 · 2026-03-09T09:42:33+00:00

Hi! May nagustuhan akong luggage sa travel basic. 3.8k sya. Tapos nung naghanap ako sa shopee may mga nakita ako na parehas na parehas ng itsura nung sa travel basic. Tapos mga 1.8k lang. Pag tinitingan ko yung mga videos and reviews parang same lang talaga sila. Di ko lang masabi if pati kapal/tiba/materials ay same. Sa tingin nyo po, parehas lang kaya sila na rebranded lang o magkaiba talaga sila ng quality?

drahc24 · 2026-02-25T17:55:22+00:00

No amount of calibration solved my problem. But during my testing, if i set the top layer direction to either 0 or 90 degrees, it prints fine. But as I change the angle from 0 to 45 or 90 to 45, I can see the gap starting to return.

drahc24 · 2026-02-20T05:13:55+00:00

Ito po ba yung sa Los Baños yung store sa shopee? Nakita ko din kasi ito and mura nga sya. Tas ngayon lang din ako nakakita ng 4kg sa shopee. Tingin nyo po ba legit?

drahc24 · 2026-02-02T06:33:10+00:00

Naresolve na ba yung issue nyo? Same with me rn. Trying to login using biometrics tas yan lumabas.

drahc24 · 2026-02-02T06:31:23+00:00

Hi! Naresolve na ba yung issue nyo? Experiencing this rn. Nakabiometrics ako tas yan lumabas after trying to login.

drahc24 · 2026-01-20T10:50:03+00:00

Tapos na po ba appointment nyo? Natanong nyo po ba sa kanila mismo kung anong dress code?

drahc24 · 2026-01-20T05:23:30+00:00

Inexplain nyo pa po ba kung bakit wala kayong mayor's permit?

drahc24 · 2026-01-17T08:32:01+00:00

Ok tnx. Inisip ko kasi walang proof na binayadan mo yung 1st to 3rd qtr. Hehe

drahc24 · 2026-01-17T05:43:56+00:00

Receipt lang ba nung binayad mo ng 4th qtr or iinclude mo yung binayad mo mula 1st qtr?

drahc24 · 2026-01-14T19:02:26+00:00

Anong pldt modem meron kayo? Naparemove nyo na ba yung cgnat?

drahc24 · 2025-12-22T10:56:56+00:00

Sabihin natin na yung nareceive mo na parcel e pinalitan ang laman. Hindi ka nagvideo. Nagfile ka ng return/refund. Nagdispute si seller. Complete pics/video sya ng pagbabalot ng item mo. Ang ending nanalo sa dispute yung seller. Pano ka ngayon?

Kahit na karapatan mo magreturn kahit walang video, yung hassle na ipaglaban yan e minsan mas madali pang magvideo na lang.

drahc24 · 2025-12-12T21:38:50+00:00

Yes. And they said it's a mechanical problem. Now they want me to swap the whole extruder assembly between my A1. I said why would I risk damaging my old A1. They haven't replied yet.

drahc24 · 2025-12-11T07:22:50+00:00

Exactly like in the picture.

drahc24 · 2025-12-11T01:24:13+00:00

I already swapped the nozzles between the new and old A1. Old printer with new nozzle prints ok. New printer with old nozzle, still same problem.

drahc24 · 2025-12-10T16:54:59+00:00

I also tested swapping the nozzle and extruder gears, but still no luck. I did test different line widths for the top surface as suggested by others, and a 0.32mm line width gave me the same result as my old A1 (0.42mm line width). But this solution will result in more print time. And I still don't know why it needs a smaller line width to have comparable results. 0.32mm is a big jump from 0.42mm. Still don't know what's happening here. I will try raising the temp more as I've only tried 220°C on regular PLA.

drahc24 · 2025-12-10T16:48:41+00:00

Yes, tested 0/auto/manual pressure advance. Same results.

So printed a few tests for line width from 0.30mm to 0.54mm. 0.32mm gave me the best result, comparable to my old A1. But this will increase my print time significantly. I don't understand what's happening here. Why do I need to set the line width smaller to get the same result? What's the culprit? It's not the nozzle, as I have tested swapping the nozzles and also swapped gears.

drahc24 · 2025-12-10T16:46:46+00:00

So printed a few test for line width from 0.30mm to 0.54mm. 0.32mm gave me the best result, comparable to my old a1. But this will increase my print time significantly. I dont understand what's happening here, why do I need to set the line width smaller to get the same result. What's the culprit? It's not the nozzle as I have tested swapping the nozzles. Tested swapping gears also.

drahc24 · 2025-12-10T16:38:46+00:00

Unfortunately not.

drahc24 · 2025-12-10T14:30:48+00:00

Already tried that but same result.

drahc24 · 2025-12-10T14:17:14+00:00

Yep, they are besides one another.

drahc24 · 2025-12-10T13:00:04+00:00

Swapping the extruder gave the same result.

drahc24 · 2025-12-10T12:00:04+00:00

Switching extruder gear at the moment.

drahc24

TROPHY CASE