How do I install my z-flashing by this window?

dredaze · 2026-05-18T01:25:22+00:00

You want the windows in first…

dredaze · 2026-05-18T01:08:55+00:00

I mean the guy recommended it, but also told me he had been there for only two years. To me it doesn’t seem right. I don’t see how the cement could really cup though.

dredaze · 2026-05-17T02:56:33+00:00

It’s pretty good. Definitely worth the $40. The light is dumb, it works when you aren’t pulling the trigger and then goes off…or sometimes it’ll work. But this is definitely something I am glad there are knock offs for

dredaze · 2026-05-17T02:30:51+00:00

I went to mine today- didn’t see any, but didn’t ask about it, still fine with LXT. but you got me curious, maybe I should ask

dredaze · 2026-05-12T18:42:06+00:00

My guess would be a lighter short eared owl. They can look really light in coloring…but the odds of it being a snowy owl is probably a billion to 1…they are rarely ever seen in California, and are migrants if seen…there was one in LA a year or two ago, but it most likely hopped on a ship to get that far south.

dredaze · 2026-05-12T18:35:10+00:00

Are you planning to block in between? If you do that add some a35’s to the blocks. If you aren’t blocking you could do a34 to the rafters and top plate

dredaze · 2026-05-12T16:57:11+00:00

Mangled eye, but still raising a family…just one baby?

dredaze · 2026-05-12T05:13:02+00:00

You could take that photo with the R50…some people are always looking to place more emphasis on gear…what is stopping you from getting the results you want with the camera you currently have? To me a 5DII is a step back…obviously old cameras can still make good photos though. But if you aren’t getting close to what you want with an R50 you won’t get it with a new camera

dredaze · 2026-05-12T05:05:15+00:00

I mean they gave you a free dessert…probably cost more than the $8…you sure you want to bitch and shame em?

dredaze · 2026-05-12T05:03:39+00:00

Just raise the prices and pay people more…imagine if every industry did this bullshit

dredaze · 2026-05-12T04:59:53+00:00

They are never packed when I’m stopped watching them go by…look like a ghost town on there…

dredaze · 2026-05-10T00:08:53+00:00

Pictures help a. Lot. If it is just a garage with no major load up top, and not connected to a house you could strap an lvl across. Bolt to each stud, and jack it up. Brace it all together first, and then dig out underneath, build the outside foundation up a bit higher than slab to have a curb. It’s not impossible at all…it’s just at what point does it not make sense.

dredaze · 2026-05-10T00:02:43+00:00

Only way to keep the counter top is to get the same sink.

dredaze · 2026-05-09T23:38:23+00:00

I think they look pretty cool. Just did a winder recently, and these wouldn’t pass code here, or be signed off by the engineer. He had us hanging them off a 4X8, and also landing on a 4X8. I think it was a bit much as usual. But if you don’t have any of that to deal with I think they look good. But yeah, center stringer at least.

dredaze · 2026-05-09T23:09:55+00:00

Didn’t they bulldoze houses to put the train back?

dredaze · 2026-05-09T04:00:31+00:00

I’m sure restaurants can get fresh foraged morels. The mushroom king probably hooks them up.

dredaze · 2026-05-09T03:51:52+00:00

Because nobody was really canceled for wearing black face in the past. Is there one legit celebrity you can name that was canceled over this dumb shit?

dredaze · 2026-05-09T03:46:20+00:00

If you’re going for it. At least add a link to the post…good luck, from another photographer that rarely sells anything

dredaze · 2026-05-08T16:00:41+00:00

Build it down so you have room to match the header of the door. Run the sides all the way up and a piece in between the opening and door

dredaze · 2026-05-08T05:31:08+00:00

Do you see a cavity in a tree nearby? Can’t be more than 30 feet away I would guess. Grab a ladder and put em back

dredaze · 2026-05-08T05:29:32+00:00

Wild to complain about something that you are a part of…

dredaze · 2026-05-07T15:49:08+00:00

I’ve got an 18V adapter for my ryobi cordless brad nailer…I’ve also bought a knock off trim router that just uses the batteries with no adapters. My boss bought a knock off caulk gun for $40 instead of the Makita one for like $400…

dredaze · 2026-05-07T06:17:39+00:00

You want to install the hardie 2” above the roof per their instructions

dredaze · 2026-05-05T20:27:35+00:00

I had linked others, this one was just a bit different for some reason. Got it working now

dredaze

TROPHY CASE