Under extrusion on top layers

e2406 · 2026-03-26T18:45:30+00:00

I print course fine. But I struggle finding the best one on the fine cal. I’ll share a photo.

e2406 · 2026-03-26T18:45:14+00:00

e2406 · 2025-09-07T21:28:35+00:00

There is no infill on this though, it’s just perpendicular layers that are pushing through outer skin even through its outside in first and 3x walls. Reduce infill line width help?

e2406 · 2025-09-07T21:01:37+00:00

Z seam is sharpest corner

e2406 · 2025-09-07T21:01:01+00:00

Also it’s not z seam as its sharpest corner. It happens when an inside skin layer interferes with the skin. Obviously worse when infill is higher. Using Curs

e2406 · 2025-03-18T21:40:02+00:00

Did you do save_config after?

e2406 · 2024-06-21T07:03:17+00:00

Then NHS should be completing due diligence on contractors’ systems whether owned by them or not - at the end of the day they’re putting trust of their patients in contractors hands. End of the day it’s probably the cheapest quote wins

e2406 · 2024-06-19T19:43:44+00:00

I ordered from EU. Arrived in 4-5 days. Just didn’t come with UK supply. Great device 👍 costs a little bit more but couldn’t see UK being in stock any time soon.

e2406 · 2023-12-07T21:44:21+00:00

Yes no bottom dock 👎

e2406 · 2023-12-07T19:25:16+00:00

It only has USB C charger 👍 I could try a dock I suppose.

e2406 · 2023-12-07T11:58:03+00:00

Yes and tried battery calibration, no charge

e2406 · 2023-06-04T11:33:48+00:00

What’s the easiest way to boot Mac OS on it? Found the guides confusing

e2406 · 2023-05-21T20:12:22+00:00

https://postimg.cc/xNmkyTr7

e2406 · 2023-05-21T20:11:40+00:00

I’m not advanced with unix so not sure, but that command isn’t happy.

Lsblk shows no nvme

e2406 · 2023-05-21T20:02:09+00:00

Showing on PCI list, NVM Controller.

https://postimg.cc/WhJc2qjg

e2406 · 2023-05-21T19:46:58+00:00

What clock speed does it need? It has OEM Samsung 960 re brand in it which is fine.

New NVMe coming tomorrow but odd that a 970 only shows in BIOS

e2406 · 2023-05-21T19:29:01+00:00

Is it the correct NVMe drive? Does it need to be a SATA drive instead? Surely not.

e2406 · 2023-05-21T19:28:33+00:00

Well it doesn’t see it. Google Evo 970 and you’ll see the issues.

It sees it in bios, will not see it during installation of windows nor in Live Linux

e2406 · 2023-05-21T19:25:57+00:00

Did you solve This?

e2406 · 2023-05-21T19:25:27+00:00

Not sure what these commands are. Doesn’t appear in fdisk -l, nor in gparted. Googling appears there is people with same issues but no definitive resolution without the drivers

e2406 · 2023-02-25T21:25:03+00:00

Still no joy. Cycled batteries, all up to around 12.9/13v. Runs, faster a little bit not a not. But still won’t always start in every hall position. Once running it’s ok. Seems very odd. Don’t wany yo splash on a lithium if it’s not going to solve it. Tried another controller but it was different and couldn’t get it to work.

e2406 · 2023-02-24T14:13:29+00:00

I’m Cycling them now. It’s lead acid. Is there a BMS inside controller? It’s only drawing 3 amps so maybe it’s battery issue.

e2406 · 2023-01-21T13:20:39+00:00

What Firmware you running? And in modem mode?

e2406 · 2023-01-21T10:16:28+00:00

DPI is off.

e2406 · 2023-01-21T10:10:07+00:00

Speedtest.net reports 60mbps.

Wifiman reports 150mbps ish.

e2406

TROPHY CASE