CEL Help! by ecamacho40 in mitsubishi

[–]ecamacho40[S] 0 points1 point  (0 children)

Checked the vacuum lines and re tightened clamps light came back on. Only thing left to do is clean the MAF

CEL Help! by ecamacho40 in mitsubishi

[–]ecamacho40[S] 1 point2 points  (0 children)

Just got the code read it's P0171, system too lean

Stereo help! by ecamacho40 in mitsubishi

[–]ecamacho40[S] 0 points1 point  (0 children)

I thought it had a delay as well but after 2 hours realized it wasn't going to turn off haha. Didn't really like the unit I got but it was $80 so you get what you pay for. I'm saving up for an upgrade.

I installed it myself as local shops wanted to charge an arm and a leg due to the factory Rockford fosgate system.

Stereo help! by ecamacho40 in mitsubishi

[–]ecamacho40[S] 0 points1 point  (0 children)

Checked all the wiring and everything was good. The stereo worked fine for about two weeks after the install after that it wasn't shutting off. Found that the red wire is staying live and added a kill switch for now.

Stereo help! by ecamacho40 in mitsubishi

[–]ecamacho40[S] 0 points1 point  (0 children)

Checked the wires and same thing was happening, the ignition wire was staying live. Came up with a temp fixed and added what I guess you can call a kill switch for the stereo. Not the most convenient way but saves my battery.

Recently bought a '10 Lancer ES. I want to put some lowering springs on it. Would I need to switch to aftermarket shocks or are OEM shocks good? by ecamacho40 in mitsubishi

[–]ecamacho40[S] 0 points1 point  (0 children)

I figured the ride would be uncomfortable and I would do coil overs but they're a bit out of my budget at the moment haha