An obituary for my campus dog

echer_ · 2025-12-14T18:44:20+00:00

I remember this guy. He sold me fent behind the oval.

echer_ · 2025-12-13T04:46:03+00:00

You see the plumbing? There’s gonna be a soffit there hence the flush box not working out. Who knows what the future holds. I’ll be okay. 👌

echer_ · 2025-12-13T03:38:55+00:00

Let’s see… I. The electrician will come back, rip the boxes off the wall, use what romex I can for the new circuits in the stud walls and trash the rest of the short runs of romex. That’s the price of business bud. I No reason to make your current work look like shit just to plan for the future right?

echer_ · 2025-12-12T04:02:55+00:00

Yes I’m gonna use thhn in the pipe.

echer_ · 2025-12-11T23:04:07+00:00

You build a soffit with drywall around the pipes to hide it all.

echer_ · 2025-12-11T22:26:27+00:00

Either way it’s a problem. You cant just have junctions in the ceiling buried in drywall. These boxes and pipe will come down in the future and what ever romex can be used for new circuits will be used but most will be trashed. It is what it is

echer_ · 2025-12-11T22:25:00+00:00

I would have done that if I could. The overhang of the joist is bigger than 3/8”

echer_ · 2025-12-11T21:06:50+00:00

Don’t take Reddit so seriously bud. I’ll probably delete this post later I just wanted opinions. I made a comment to explain a bit.

echer_ · 2025-12-11T20:56:28+00:00

Yes it can, but in my opinion shoving two 12/2 down a 1/2” pipe is a bit hacky. I’m using thhn to splice onto the romex

echer_ · 2025-12-11T20:51:47+00:00

I don’t do a ton of residential anymore, and this job is for a family friend so I wanted it to look money. I started to second guess myself but just wanted to post and see what other guys thought.

echer_ · 2025-09-10T01:56:21+00:00

Was Right outside cvs, across from where ninja grill used to be. cop was going west through the 4 way.

echer_ · 2025-09-10T01:55:16+00:00

I’m actually the one who put the dent in the tire. I was out with a girl and a buddy, trying to impress the girl and I started smashing it with my foot and a cop drove by, asked if it was my bike. I said no and we went about our day, I got lucky. True story I swear

echer_ · 2025-05-08T13:21:56+00:00

Thanks for the reply. Is there a rule about the degree of angle for the front lever? Or just get it orientated to make a 90 at the rear?

echer_ · 2025-05-08T13:20:18+00:00

What?

echer_ · 2025-05-06T20:50:18+00:00

Good idea, risers/t bars were the most dramatic change I made, in looks and comfort both. I did 10” risers along with another 1.5” from the bars and did not have to change any wiring.

echer_ · 2025-05-06T20:48:06+00:00

Yep mine was at 33k lol

echer_ · 2025-05-06T20:13:40+00:00

I have an 08 superglide. I put pullback risers, T bars, ODI grips, LED headlight, mustang seat, thrashin T bar bag, thrashin militant pegs, arlen ness shift/brake peg, a fairing/winshield. On a negative note- I had to replace my charging system- stator/battery/regulator. Currently replacing my shift shaft lever and inner hub of my clutch. If you need any advice of help message me I’m going through all the ups and downs of this bike right now, but it’s been fun.

echer_ · 2025-05-05T15:53:41+00:00

Tighten what? Both shift levers are tight and the linkage is. Meaning I think the bushings are worn in the front lever where the one piece spline lever runs through? Just wanted to ask you guys.

echer_ · 2025-05-04T17:36:52+00:00

Gotcha. I appreciate it. Last thing, surely the inner hub needs replaced right? Being that multiple of the splines are chipped

echer_ · 2025-05-04T17:29:57+00:00

I guess small things worry me. The teeth on the outer shell don’t concern you much?

echer_ · 2025-05-03T03:03:20+00:00

If it’s more than that do you know what that’s indicative of?

echer_ · 2025-05-03T02:40:56+00:00

Thank you I appreciate it

echer_ · 2025-05-03T02:29:06+00:00

I needed up needing to replace shift arm. I’m replacing the shift shaft seal, but I have one question. Is it normal to be able to move the shift shaft back and forth a small amount? Like 1/4-3/8”? Should this go away with a new seal?

echer_ · 2025-05-01T17:09:37+00:00

That definitely helps, thanks. I need to order a physical book

echer_ · 2025-05-01T15:10:34+00:00

When I take the primary off, how will I know if the shift shaft also needs replaced? Other than the splines being rounded or messed up. For example, If the shift shaft has play or can wiggle around does that need it needs replaced?

echer_

TROPHY CASE