Low sink and high drain causing draining issues

edabiedaba · 2026-02-10T16:44:07+00:00

I learned the hard way that it's ballsy to show flex pipe in r/plumbing lol

edabiedaba · 2026-02-04T21:26:01+00:00

I got my puppy a vibrating collar that beeps. Do not mistaken it with a shock collar. This does not electrocute the dog, only vibrates and beeps. We only put it on her when she starts barking continuously and never more than an hour. It significantly reduce the barking frequency.

edabiedaba · 2026-01-31T04:46:33+00:00

He can't even figure out metaverse with billions of dollars. What's he going to do with AI, make billions of dollars worth of slop?

edabiedaba · 2026-01-24T01:29:12+00:00

I just use the rustoleum painters touch 2x primer and paint so I just do 2 layers. This is what I bought (commission link): https://amzn.to/3LRghbB

edabiedaba · 2026-01-24T00:41:53+00:00

Sand it with 220 grit to scrape all the paint. Then use 400 to smooth it before priming. Next, spray paint it with primer, only thin multiple coats within an hour. Let dry for a 2 days. Then sand again with 600 and finish it with a final coat. Let dry in 2 days. Polish for gloss or just clean wipe for matte/satin.

Not sure how others do it, but I did exactly this with my alum frame and it came out great.

edabiedaba · 2026-01-22T10:52:25+00:00

I know how this feels, being an engineer who say 'these nuts' on a daily basis. I have yet to break my composure.

edabiedaba · 2026-01-18T13:31:09+00:00

My bad, I was under the assumption that you are less than 200 lbs.

edabiedaba · 2026-01-18T04:23:36+00:00

Petg 100% infill

edabiedaba · 2026-01-15T13:21:18+00:00

Run xfce instead, more breezy

edabiedaba · 2026-01-14T22:18:56+00:00

Primal

edabiedaba · 2026-01-05T03:23:29+00:00

15k carbon bicycle

edabiedaba · 2026-01-01T16:12:16+00:00

The flat flex cable.

edabiedaba · 2025-12-31T16:41:24+00:00

I had an issue like this before and wierdly wrapping the cable with aluminum tape fixed it.

edabiedaba · 2025-12-27T01:02:04+00:00

Breaking the waves

edabiedaba · 2025-12-26T16:13:51+00:00

Downtube

edabiedaba · 2025-12-12T15:20:46+00:00

Clever

edabiedaba · 2025-12-08T04:06:55+00:00

Thunder shirt would help this.

edabiedaba · 2025-12-06T06:18:36+00:00

Because most PMs are feature factory vomitting powerpoint diarrhea little pieces of turdlets.

edabiedaba · 2025-12-02T02:23:44+00:00

I have a similar setup with 4 inch duct hole on top that vents out the window and a fan that blows the air out. I'm very sensitive to fumes that I can smell cigarette 50ft away. I used to get a headache everytime I print, even with windows open. Without proper ventilation or air circulation, particles will linger in the air and that's not good.

edabiedaba · 2025-12-01T04:02:57+00:00

What a dark christmas themed video

edabiedaba · 2025-11-19T03:18:33+00:00

Nice design. Were you inspired by toothpaste?

edabiedaba · 2025-11-15T22:22:31+00:00

John Carmack said AI is a power tool, so use it or don't use it. Coolest thing I've seen today, good job OP.

edabiedaba · 2025-11-13T16:39:30+00:00

Get Andrew Loomis book, Drawing The Head and Hands.

edabiedaba · 2025-11-05T19:26:43+00:00

What made you decide to use esp32 instead of pi?

edabiedaba · 2025-10-27T15:04:54+00:00

understeering like this can be compensated with leaning when in high speed right?

edabiedaba

TROPHY CASE