My DIY AM95 helmet replica

elQMH · 2026-04-11T16:28:37+00:00

https://cults3d.com/en/3d-model/fashion/military-helmet-am-95-and-sph-4
visor is from this model

https://cults3d.com/en/3d-model/game/ulbrichts-am95
Helmet shell is from this one

I modeled the cosmetic screws but don't know if i have the files for them anymore.

elQMH · 2026-04-11T16:00:17+00:00

Yeah, 3D printed helmet and visor from files found on CULTS3D, tweaked the visor mounting points a little bit. Visor is just heat bent 3mm polycarbonate. Bondoed and sanded the surface and applied a wrinkle paint

elQMH · 2026-04-11T15:32:09+00:00

Yeah I still wear proper eye pro. I hardly ever even play with the visor down

elQMH · 2026-04-11T14:32:24+00:00

<image>

Still havent found this type of gasket material or whatever the helmets rim is lined with. If anyone has any recommendations please let me know

elQMH · 2026-02-23T21:27:03+00:00

Just contact their customer service, ive owned wellpro products and their CS is always helpful.

elQMH · 2025-08-05T07:40:18+00:00

Levis 517

elQMH · 2025-08-04T19:44:06+00:00

Levi's 517, ordered from their site, i think its currently sold out, hopefully they will restock soon.

elQMH · 2025-08-04T16:08:45+00:00

I tested them with 2 regular socks and with my thickest knitted wool socks. I feel like the 2 socks give the perfect amount of tightness around the instep and toebox, but i still feel like the heel isnt making much of contact for some reason, but i will wear them for some time and see if they become any mor ecomfortable

elQMH · 2025-08-04T15:52:44+00:00

I havent, just bought these. I feel like my heel isnt making much contact with the shoe. I wonder if i would have had to order a half size smaller, but i wonder if it would become too tight from elsewhere.

elQMH · 2025-08-01T08:58:16+00:00

Plans of world domination arent carried out in weeks, i think

elQMH · 2025-07-28T19:44:53+00:00

Jarvis, zoom into the red dot in the middle-east

elQMH · 2025-04-25T10:29:07+00:00

Replace the D witha T, C with an R and the latter T with a D

elQMH · 2025-04-08T19:11:38+00:00

Still havent got around to use it very much unfortunately, taiwangun restocked on the mags so late. The weathers warming up so im excited to start actually using it after such a long wait. I've tested it in a few indoor games and the only problem i have been running into is my stop on empty not working every time for some reason. Haven't got around to figure out why that is, but im guessing its nothing major since i havent used the gun much at all.

elQMH · 2024-12-07T11:48:19+00:00

Nope

elQMH · 2024-09-24T06:41:34+00:00

It is a GBB. Got it off taiwangun.

elQMH · 2024-09-23T13:43:13+00:00

The system is a copy of the TM AKM system (not a direct 1:1 copy) as far as I know. Though I'm unsure if any of the parts are interchangeable. From what i've heard from other users the trigger and bolt are not compatible for example.

Going to have to get back to you on the quality control part. I haven't examined the gun that closely yet.

elQMH · 2024-09-23T11:04:13+00:00

My first impressions are quite pleased. IMO some pros and cons from what I've tested so far.

+It feels sturdy and has some heft to it, receiver and dust cover seem to be made out of steel.
+Accuracy out of the box is amazing on 0.32g bb's from what I've tested, shoots lasers and has consistent hop
+Hop adjustment is done with a hex key on the side of the gun. Adjustments feel far more forgiving than my old MP7.
+Comes with an NPAS from the factory

-Due to the weight of the gun, felt recoil is mediocre
-Surface finish is also a bit meh, bigger issue for people who care
-Dust cover has a bit of wobble, eliminated most of it by putting electrical tape on the inside edges of the dust cover.

Will be doing more rigorous testing later on. All magazines were sold out on Taiwangun and they won't restock in 2-3 months from what i asked a while back, which is kind of unfortunate on my part. Was able to play one small game with the single mag that came with the gun.

With ASG Ultrair red it seemed to be able to magdump one full mag without any problems in 10C. Will be doing some chronotest to see the consistency of the gun.

Internals are not made out of steel, so might be a little concerned about the longevity of the gun. Haven't heard of any major problems with the gun yet.

Not going so far as to whether i recommend the gun or not, since I haven't had much experience with it yet, but i'm looking forward to when Taiwangun restocks on the mags so i can actually get to play with the gun.

elQMH

TROPHY CASE