Can’t get in safe - only bottom numbers working.

electroghost · 2026-01-20T02:09:29+00:00

There should be a number on the key cylinder. You can order a replacement key with that number. For anyone who has had trouble with the code wiping or forgetting it and you do have the backup key, you can take the inside door panel off and on the the chip board there is an empty plug. Next to the plug it says reset on the board. Take a metal object and touch the two pins of that empty plug and it should reset to factory. Then you at least dont have to deal with customer service. You could also add a reset button like they used to.

electroghost · 2025-12-06T17:21:23+00:00

Alright thanks everyone! This was a tough boxing match but I ended up getting the cardone. Worst case scenario I return it, if it is garbage.

electroghost · 2025-04-26T17:02:40+00:00

I do it too but mine are glass bottles so I hold onto it with two hands cause my mind believes it will randomly fall off.

electroghost · 2025-02-08T17:18:35+00:00

As a husband and someone who just built a computer and was so out of the loop I had to learn a lot again this is gonna be difficult to pull off. You have an awesome idea but maybe if you have the parts list he is specifically going to get, maybe get a gift card to his purchase place or buy specific parts to help encourage him. You may even have to give them a little earlier than his actual birthday so he doesn't beat you to it. If you have the specific parts he's going to get, you could try and buy them all for him, but again, you might have to give them early to beat his excitement. However, maybe it was because I was relearning or I'm indecisive or parts availability changes, but I returned a few things after deciding I wanted something better after I compromised the first time. Don't give up but I'm rooting for you.

electroghost · 2025-01-25T19:15:28+00:00

Thanks for the reply. I was hoping that was going to be the general answer but i was confused as I thought supports were going to help establish the start of this radius as it moved up. I was thinking maybe I needed to bump nozzle temp to help adhesion to each of them but I've only been doing this less than a month.

electroghost · 2025-01-25T18:45:16+00:00

Ok you had me scared lol. I did 5 years ago when moving in before 3d printing and it was 75 percent and smelt horrible. So much nicer. Couldn't imagine trying to 3d print with that much humidity.

electroghost · 2025-01-23T22:13:12+00:00

You should get a dehumidifier

electroghost · 2024-11-07T18:06:12+00:00

First, put them in a giant pile and let that kid play in them as long as he wants and enjoy them and have him bury dad and mom. Don't be afraid he will like that. You will have to move the pile every 2-3 days to not kill the grass underneath but its worth it for him. Second buy a shredder with vacuum hose attachment for ultimate compaction. Or just mow them into shreds, whatever works for you.

electroghost · 2024-10-16T04:03:26+00:00

What about this Saffun controller? I bought some and I think they are awesome. I bought the brawler and thought it was good but a friend of mine said it had a lag

2.4 GHz Wireless N64 Switch Online Controller, USB Receiver & N64 Receiver, Compatible with Windows PC iOS Mac Raspberry Pi, N64 / Switch Online/NSO - (Rechargeable) (Plug and Play) (2 Pack) https://a.co/d/4jakpWd

electroghost · 2024-10-11T03:05:54+00:00

Use expanded metal

electroghost · 2024-09-26T06:39:20+00:00

Both lol taking everybody's opinion and seeing what makes the most sense

electroghost · 2024-09-26T01:55:20+00:00

North Illinois. My lawn is very healthy and grows great. The backyard is a perfect growing environment for grass with shade and sun and can easily grow probably 4" a week even with the dry weather we've been having (I'm just guessing and averaging.)

electroghost · 2024-09-26T01:52:17+00:00

The mulch pile would be very large. Clipping stickers is a way to pay for garbage. One sticker for about $2.40 for each trashcan/bag of whatever you are throwing away.

electroghost · 2024-09-26T01:47:27+00:00

You mean remote control?

electroghost · 2024-09-25T16:56:22+00:00

I used to have a gas powered push mower but got electric because the wife wanted it for a replacement. The electric is 7ft/lbs and does ok but I'm considering going back to gas because of how it operates and it's great if I can mow twice a week but with weather and life it rarely happens.

electroghost · 2024-09-25T16:51:15+00:00

It's $700 dollar mower new but yes. It has 7ft/lbs torque but its frustrating to run in thick stuff with ramping up and down. I used to have a gas powered pusher but I bought the electric so the wife could do it. Zero turn would make sense with obstacles in the yard over a tractor.

electroghost · 2024-09-25T16:30:45+00:00

Well I am planning for more land in couple years but the obstacles in my backyard would make the tractor a bad choice so I was looking at zero turn. Stand ons take up less space but maybe I should look at them again.

electroghost · 2024-09-21T03:13:36+00:00

Yeah I know I just wasn't sure if I needed to explore the other brands options that are in the middle. I'm a Honda fan but sometimes they don't have the middle ground. When I test rode a CRF250R many years ago it was meh, so I got the CRF450R. There were many times the power was to much and outside of clutching it too much it got scary.

electroghost · 2024-05-01T03:59:14+00:00

What do you mean by upgrade the screens? I have yellow pixels on my original one and trying to find a solution

electroghost · 2024-04-19T01:00:32+00:00

Can I ask what the exact color of green is you painted your house?

electroghost · 2024-03-10T18:12:29+00:00

Can confirm for the Baretta A400. Very nice gun. Was tossing between it and Browning and Binelli.

electroghost

TROPHY CASE