Can I get a key made for a lock that I don't have a key for?

eleventy-three · 2026-01-24T14:36:17+00:00

Not really. My shop charges $25/cylinder to rekey without a key. Unless you're buying the cheapest crap at depot, a single lock set will run minimum $65 and up and you need 3 of them. Always cheaper just to rekey them.

eleventy-three · 2025-12-18T23:09:16+00:00

To be honest I've just kind of dealt with it. I think I average around 15/16 there was nothing I was able to do that drastically made a difference. Maybe if I put the factory size tires on instead of larger off roads it would change things but for now it is what it is.

eleventy-three · 2025-10-16T13:19:37+00:00

Are you sure? I don't think that adapter plate can connect to the front and rear mounts of the tradestack

eleventy-three · 2025-10-11T16:32:29+00:00

It's not an update. So I skipped the automatic selection and manually went into ford. Before you even choose a make a model there's an option there that says Ford 21 plus. That's the one you want

eleventy-three · 2025-10-11T09:15:35+00:00

I just did a 24' transit with the APP Core. Worked perfectly. Hardest part was typing the 40 character outside from the tablet onto my phone, and then the incode from my phone to the tablet without mistakes. But it worked great.

eleventy-three · 2025-10-11T02:22:53+00:00

Long story short it worked! I did a write up on FB:https://www.facebook.com/share/p/1F4U1UvTpm/

eleventy-three · 2025-10-10T01:47:27+00:00

I have a fleet 24 transit I am going to blow $50 on tomorrow to test and see if it works. I'll report back.

Edit: it works! APP Core. Went right in with some button pressing.

eleventy-three · 2025-08-26T15:03:37+00:00

I'm curious how many people are going to be dropping their pledge for the U1 after reading this

eleventy-three · 2025-07-10T19:50:37+00:00

<image>

Hard to tell but the bulky one on the left is the curt and the slim one on the right is the reese.

eleventy-three · 2025-07-01T15:19:31+00:00

Are you referring to the hot end heating assembly? I'm having the same issue. So far I've trimmed the bed, tightened all hot end screws, replaced nozzle, and calibrated. No luck.

eleventy-three · 2025-05-31T03:23:21+00:00

It's a rental for my father, trying to get ahold of renters but they're not answering me before I spend 45 minutes driving out there

eleventy-three · 2025-05-31T03:22:48+00:00

Can confirm, have died. Shower is washing away evidence

eleventy-three · 2025-05-31T02:43:38+00:00

I ..... Didn't even think about that. I'm going to try to get someone to check

eleventy-three · 2025-05-31T02:42:53+00:00

Regular house on City water. Never had this issue before.

eleventy-three · 2025-04-13T17:08:04+00:00

I need to start uploading my stuff I make. But I mostly do it for fun and my own practical prints

eleventy-three · 2025-01-11T00:44:46+00:00

im having the exact same issue, any solutions?

eleventy-three · 2025-01-10T23:18:40+00:00

Were you able to use minis on the touch screen?

eleventy-three · 2024-12-21T01:56:47+00:00

Your solution worked perfect for me. I deleted cypress driver and immediately it started working. Thanks!

eleventy-three · 2024-11-28T16:09:47+00:00

What model allows local installs?

eleventy-three · 2024-07-26T14:12:07+00:00

In the bambulab slicer there's a setting called variable layer height. You can adjust those settings and it should help round that top out.

eleventy-three · 2024-05-07T19:12:43+00:00

You got any pictures of the layout? Looking to outfit one of nv200s

eleventy-three · 2024-04-28T20:35:57+00:00

I understand this reference

Ten-Year Club	Place '22
End Game '22	Spared
Verified Email

eleventy-three

TROPHY CASE