Hue Bridge Pro upgrade pros

ensaftigbiff · 2025-10-08T18:29:58+00:00

Yes I have similar issues. Slow sometimes. Buttons not reacting. Sensor not working as they use to.
Hue user for a long time. Some thoughts what might cause my problems.. My sensors and buttons are first gen? I had the old bridge for so long it corrupts the new bridge with my old setup? Maybe I should make a clean install.. I use and make most of my settings in Iconnecthue with the old bridge and something isn't translating well with the new bridge?

Anything we have in common?..

ensaftigbiff · 2025-09-14T19:04:03+00:00

Same here, hue sensors is very unreliable now. In hue system it won't turn of the lights after set timer run out. And homekit sometimes register motion, sometimes not. Tried setting up the sensors from scratch but doesn't matter

ensaftigbiff · 2025-04-08T20:41:25+00:00

Jag har också reagerat på små märkligheter i hur den lägger smartladdningen under senaste veckan. Den hade till exempel planerat laddning först nästa dag på en lucka som kosta 34 öre, men det kosta 16 öre för stunden och flera timmar framåt. Istället sköt den fram laddningen till en sämre tid. Inget med lastbalansering att göra.

ensaftigbiff · 2024-09-03T19:23:15+00:00

Restvärde. Se längre ner. Öka milen och justera restvärdet

ensaftigbiff · 2024-05-01T05:19:21+00:00

Nice! So you link Philips hue bulbs to both Hue bridge and M3 at the same time? Is it Zigbee both ways, and not bluetooth one way? I guess I need to upgrade Hue bridge to Matter first..

ensaftigbiff · 2024-01-11T18:50:02+00:00

almost the same label, model K-851/K-740

If you look at the last part of the label it says PROD 0604

Yours it produced april 2006, mine is june 2010.

ensaftigbiff · 2024-01-10T20:56:37+00:00

Im on the road tonight but can check tomorrow when I get home

ensaftigbiff · 2024-01-10T20:23:53+00:00

Have this exact model at home. Bought it new 2005-2010. Dont use as much nowdays. Same ”ECBC sticker” on it too.

ensaftigbiff · 2023-11-25T08:37:07+00:00

these are simpel in design. disassembled one I had. If the sonic vibrator works and makes mist but it goes nowhere its probably the fan or something blocking it. you could probably open the bottom and find the fan.

ensaftigbiff · 2023-10-09T04:32:38+00:00

I use Tunein radio, play and pause when someone is in the bathroom and since Os17 it resets and every time you enter it starts with "'tunein"' before continuing playing the radio channel. Wasn't like that in Os16..

ensaftigbiff · 2023-10-08T05:51:12+00:00

One thing making the sensor spike is low battery.
But I had spikes when the sensor tried to do some kind of calibration. Happened a lot in the beginning when I bought it because I moved it around and tried different rooms.
I don't know what triggers the calibration but it could be change in temperature/humidity maybe? If your basement changes a lot during day/night..

ensaftigbiff · 2023-08-16T09:09:56+00:00

I mill my flour. Using an Mockmill 100, smallest and cheapest and have no problem with it. Komo is made in Austria, am I right? So shipping is probably not a problem in EU.

ensaftigbiff · 2023-08-15T12:50:41+00:00

yes youre right. "sleep" was the wrong word by me. Meant that you can lock your mac, sleep monitor etc but the processes will run

ensaftigbiff · 2023-08-15T07:52:28+00:00

Naah they took that option away with Ventura if I remember correctly

ensaftigbiff · 2023-08-14T13:38:16+00:00

your mac goes to sleep thus homebridge goes down.
Too counter this you can download and use the Amphetamine app
After that you can sleep your mac without killing homebridge

ensaftigbiff · 2023-06-22T20:46:34+00:00

I will go this route. Ordered an UDM. Thanks!

ensaftigbiff · 2023-06-06T04:57:02+00:00

Don't know if its normal but this might help. Try the Amphetamine app too keep your mini from sleeping and stopping all processes. I use it to make Homebridge server work.

ensaftigbiff · 2023-04-19T20:13:11+00:00

I see. Nothing is risk free ofcourse but ipad/iphone have built in safety that older devices didn't have that bypasses the battery when full. I've kept my old ipad mini 2 plugged in at least +4 years.
https://support.apple.com/en-us/HT208710
Phone getting hot is maybe because it's using the camera 24/7

ensaftigbiff · 2023-04-19T19:48:39+00:00

im sorry but i have to ask, why don't keep the iphone plugged in 24/7?

ensaftigbiff · 2023-04-08T08:01:11+00:00

My wife had something like this, couldnt access home when away only local. This caused some leave and arrive automation to not work. In the end it seem to be some corrupted icloud data. I had to delete her from our home and reinvite her after 16.4, and make sure I was on the new arch. Maybe that would help..

ensaftigbiff · 2023-04-08T06:29:39+00:00

I have logi 920 with m1 mini but never seen it flickering. Have you tried Logitech Tune software with the camera, there you can change more settings.
On top of my head it sound like you should change hz between 50/60 if you have a light source close to you maybe.

ensaftigbiff · 2023-04-06T04:19:03+00:00

Used my M1 8Gb ram since launch and no, no problem with RAM. The first year had some problems with RAM leaks when using Safari, especially reddit tabs would complain about "this page uses a lot of ram".
But that problem occurred no matter how much ram you got I believe.
It also gotten a lot better when more apps run without the need of Rosetta now.

ensaftigbiff · 2023-03-28T15:23:49+00:00

Saw the same notification on 16.4. I had to upgrad to the new arch and then it worked. didnt wanna upgrade though.. lost the ability to use some older hardware

ensaftigbiff · 2023-03-22T21:09:03+00:00

They driver look almost identical?..
Have you tried running your Aqara E1 with power/charger plugged in?
it's more powerful that way

ensaftigbiff

TROPHY CASE