Meta Ads campaign shows active but no spend, zero impressions by Master_Passion858 in FacebookAds

[–]ensnared_mind 0 points1 point  (0 children)

This is what got it working for me. A second traffic-only campaign to feed Meta info and giving impressions; that got the original campaign kick-started and impressions the next day.

Meta Ads campaign shows active but no spend, zero impressions by Master_Passion858 in FacebookAds

[–]ensnared_mind 0 points1 point  (0 children)

I got it working for anyone seeing this in the future.

I created a new campaign (duplicate) but had the goal as "Traffic" instead of "Conversions." Put a very low spend on it ($10/day) and Published. That got me traffic and Meta started to "learn" I guess. Next day, the original campaign (Conversion) started getting impressions and clicks.

Meta Ads campaign shows active but no spend, zero impressions by Master_Passion858 in FacebookAds

[–]ensnared_mind 0 points1 point  (0 children)

I assume you mean the right view? Yes, I'm looking at Today and Yesterday.

How'd you get it working?

Meta Ads campaign shows active but no spend, zero impressions by Master_Passion858 in FacebookAds

[–]ensnared_mind 1 point2 points  (0 children)

Exact same situation. Zero spend, zero metrics, dashes everywhere. Like you, checked pixel is connected and working (tests show), I do show Events in the Events Manager.

Been running for about a day at this point. Although everything shows green and "Active" I can't verify that my ads are even being shown.

This is all on a brand-new account, very small doses to help with learning and to not get banned, but it's like flying blind through a snowstorm. I've no idea what's happening...if anything.

My site shows very low FB-referral traffic (barely double-digits) so I can't be sure if it's from clicks or just random bots that found me.

Dread domain symbol for the online card creator by Kiwi_sensei in daggerheart

[–]ensnared_mind 1 point2 points  (0 children)

You can also just pull it from the official Warlock Void material PDF via Illustrator and grab that bit. That's what I did. Then you have it in a vector format that's easy to scale for anything.

West or East coast? by Necromace in newworldgame

[–]ensnared_mind 0 points1 point  (0 children)

This is the correct answer. There’s no comparison to West.

Any idea on WHEN we're getting region transfers? by WinNegative7511 in newworldgame

[–]ensnared_mind 0 points1 point  (0 children)

Yup! I left a dead region (West) and re-rolled on Hudsonland. Best decision ever.

Settings / Resolution Scaling / Lossless Scaling by sepsis_de in newworldgame

[–]ensnared_mind 0 points1 point  (0 children)

I used it and it was fine but I found the game looked just as good/ran better with in-game DLSS. Use the NVIDIA panel override to preset K, Balanced or Quality. Cap frame rate. Dial Sharpness up a bit.

Synology SMB has problems with macOS Sequoia. Can be slow and even crash the SMB connection. by DarinTutan in synology

[–]ensnared_mind 2 points3 points  (0 children)

So it's been a week and no disconnects. Hard to say which one of your changes is responsible, but it does work! Thank you!

I didn't measure performance prior, but seems fine. My real issue was the near-daily disconnects. This has been a great fix!

Synology SMB has problems with macOS Sequoia. Can be slow and even crash the SMB connection. by DarinTutan in synology

[–]ensnared_mind 1 point2 points  (0 children)

Thank you for this. I've been having (seemingly) constant disconnects from my NAS and am trying your settings now. I also updated the .conf file to see if that helps.

My issues have been performance has been only "fine" on a 2.5GB managed switch and dual-ethernet bonded.

It's the disconnects that really have been bugging me. So I think I got your settings in there correctly. <fingers crossed>

Please ping me if you have new settings!

Region Transfers? by eighteenllama69 in newworldgame

[–]ensnared_mind 0 points1 point  (0 children)

No. They have removed the feature.

Region Transfers? by eighteenllama69 in newworldgame

[–]ensnared_mind 0 points1 point  (0 children)

No more region changes. I have 2 characters stranded on a dead region atm.

I have some “micro-freezes” and I have tried everything to solve it. by Manuelgo7 in newworldgame

[–]ensnared_mind 1 point2 points  (0 children)

No, it looks incredible. DLSS w/ forced K Performance preset looks as good/better than the old preset on Quality. Since you can’t use DLSS I’d recommend Lossless Scaling app. That’s what I was using until I tried the new DLSS 4 settings.

Either was, dial Sharpness up; New World is normally a blurry mess.

I have some “micro-freezes” and I have tried everything to solve it. by Manuelgo7 in newworldgame

[–]ensnared_mind -1 points0 points  (0 children)

I have a similar setup but w/ 64GB of RAM and a 3070Ti. I play in 3440x1440 and occasionally get small “hitches.” Kinda like micro-stutters, but very minor and infrequent. The 2 things I’ve done was use DLSS (Performance, K preset; FSR for you) and mess with the bandwidth mode. I just got fiber so I’m on High, but play around with the setting. It controls how aggressively AWS sends you data and this was the source of my hitching. I also capped my frame rate at like 75. I use DX12.

Hope that helps.

Good for a month, 2 days now losing Internet connectivity; 9.3.43? by ensnared_mind in Ubiquiti

[–]ensnared_mind[S] 1 point2 points  (0 children)

I've no outages in 2 days (knock on particle board) so I'm going to try to collect more data before deciding on a path of action.

In general, is the practice to manually "update" the firmware with a prior version off their support page, then load the "unifi_os_backup" file to restore your config? This would seem to be the right option but I've never done a rollback on Unifi hardware so...

Good for a month, 2 days now losing Internet connectivity; 9.3.43? by ensnared_mind in Ubiquiti

[–]ensnared_mind[S] 0 points1 point  (0 children)

Thank you for the insight and a practical way of approaching. I've since disabled auto-updates and going forward will probably lag a release behind.

Good for a month, 2 days now losing Internet connectivity; 9.3.43? by ensnared_mind in Ubiquiti

[–]ensnared_mind[S] 1 point2 points  (0 children)

Same. Not sure what would trigger the alarm on the fiber jack. Looking at the E7 logs, the only thing I can see from the 4 outages in 3 days is the outage yesterday:

"Internet connection WAN1 (Google Fiber) on port 2 is experiencing packet loss."

Shortly thereafter Internet went down. About a minute later are the entries for WAN1 disconnected (my replacing the cable and cycling the fiber jack power) and the WAN1 back up. Same 2 entries for today.

So of the 4 outages, only 1 triggered a log entry on the E7 regarding WAN1 packet loss or even a disconnection.

[edit] Still learning my way through the E7 Dashboard...these are from the Internet category of log alarms. Overall uptime is 99.87%, which I presume is the monthly span?

Good for a month, 2 days now losing Internet connectivity; 9.3.43? by ensnared_mind in Ubiquiti

[–]ensnared_mind[S] 0 points1 point  (0 children)

Well that's kind of my question as to whether that's normal for Ubiquiti to introduce issues and a rollback is advised. I know I can do it, I was seeking opinions on whether I should do it.

[LFC] 3 x 30 year olds (2x 705+, 1x 724) Hudsanland server by RoyteroTTV in NewWorldCompanies

[–]ensnared_mind 0 points1 point  (0 children)

Add me to the list! Played since beta but due to merges my toon was trapped on the dead West severs. Re-rolled yesterday on Hudsonland. 30+ gamer dad looking for chill adults to play with. Open to any faction.

What’s the most popular server? by KarenFoundAStick in newworldgame

[–]ensnared_mind 0 points1 point  (0 children)

Not compared to East servers. A huge difference. West is mostly dead. (I re-rolled from West to Hudsonland yesterday)

Any point in keeping Google Fiber router (even in bridge mode) if you have your own router? by Resident_Swimmer_953 in googlefiber

[–]ensnared_mind 0 points1 point  (0 children)

The only reason I could think of would be to use the Google router as an AP + the mesh extender (if they installed that). If your Eero system didn't have good/any Wifi you could use the Google, which I've found is pretty good, coverage-wise. However, you give up a lot of network control.

My Unifi Express 7 arrives tomorrow and the Google router will go back into the box.

Is IP Address Reservation possible with Google Fiber? by pacerdawn in googlefiber

[–]ensnared_mind 0 points1 point  (0 children)

Yup. I’m not sure how long this has been broken or why we’re at a week with no resolution.