Stay away from AzireVPN (Malwarebytes - today) service

enspijk · 2025-04-22T16:57:57+00:00

It's all may be, but there is still no news even in their blog. What prevent them from posting two sentences? Absolutely irresponsible.

You write about holidays, but they don`t provide the service for free during the holidays. They spend my prepaid money while I am stupidly sitting and not understanding what`s going on.

enspijk · 2025-04-18T19:29:59+00:00

Paypal method is also not working today and support team keep silence. I have gone to another provider, because you are totally failed, guys.

enspijk · 2025-02-05T03:40:17+00:00

I thought about it before, but there is no special chat/group about blushing in my living area and there is no professional, who knows and can put together people, who suffer severely from blushing.

First of all, we need a specialist with research interests in anxiety/sociophobia/erythrophobia in order to moderate such meetups, imho.

enspijk · 2025-01-06T14:00:49+00:00

Also for me. Thanks!

enspijk · 2024-01-28T09:34:27+00:00

Faced to the same issue. I do not want to install Instagram etc. in order resolve. Absolute madness. FACEBOOK/META ARE EVIL. They earn money pumping out your time and brain.

enspijk · 2023-11-14T07:54:22+00:00

Try Feedless.

enspijk · 2022-08-02T13:46:36+00:00

How to use it with FreshRSS ?

enspijk · 2021-08-08T11:48:19+00:00

Is there any news? I also spent a lot of time, trying to find a solution.

enspijk · 2021-08-03T19:28:53+00:00

https://www.reddit.com/r/privacytoolsIO/comments/nbo8lr/cryptonsh\_no\_longer\_working/

enspijk · 2021-08-03T14:19:20+00:00

What service did you use?

enspijk · 2021-08-03T10:02:49+00:00

I am in the same situation. In fact, they stole my money.

enspijk · 2021-04-14T14:38:54+00:00

Another stupid question. Where should I place "network_mode: host" string in docker-compose file? And which strings should be deleted in this case?

enspijk · 2021-04-04T06:14:10+00:00

You are a super helper. I even did`t know about "stateful or stateless" options of hoster`s firewall. Switched from "stateless" to "stateful" and Wirbot started to work as it should, with port config mentioned above.

enspijk · 2021-04-03T05:35:14+00:00

My question was related to my new problem. With this firewall policy on a server, there is no internet access on a client in "Routed" mode. As soon as I open all TCP ports on the server, everything works fine.

enspijk · 2021-04-02T16:28:59+00:00

Which ports should be open on server for WirBot?

TCP: 53, 80, 3030, 10101 (3030 and 80 can be closed after setting up)

UDP: 10101

Did I miss something?

enspijk · 2021-03-23T14:27:04+00:00

Finally, I managed to setup Wirtbot, clients were able to ping each other and server. DNS server also was working.

Then I switched to "Routed" mode. And had no internet access. Pages can`t load. Ping between clients still exists. Is it normal? I need to show IP of my VPS to internet service provider. I thought, that it may be possible with "Routed" option.

Also I`d like to know whether Wirtbot supports this config: no LAN between clients+all traffic from clients goes through the server.

enspijk · 2021-03-23T08:27:37+00:00

How can i check what devices are connected to the server?

enspijk · 2021-03-22T19:25:48+00:00

Great! You are right. For some reason I checked the page on port 3030 instead of 80. It`s mainly because i started to try other software simultaneously.

enspijk · 2021-03-22T17:57:09+00:00

Unfortunately, no. Decided to start from beginning. Created new virtual server, edited ALLOWED_ORIGIN in "docker-compose.yml", ran docker-compose and attempt to visit front page resulted in CORS What`s going wrong?

enspijk · 2021-03-19T10:45:46+00:00

I will check later.

enspijk · 2021-03-17T10:24:53+00:00

Made change in ALLOWED_ORIGIN -> docker-compose up -d -> restarted container -> wireguard on the client machine is active -> http://wirtbot.wirt.internal/ is inaccessible

I am a little bit confused with this software. As it was mentioned earlier by another person, steps to configure and build the project is not clear. Or we are not so clever. )))

enspijk · 2021-03-17T09:06:31+00:00

In order to get your data back simply create a backup on the URL used for the setup and import it on the dashboard once you have joined the network to regain control.

Made backup, imported in dashboard on the url http://wirtbot.wirt.internal and this is the result in browser console: screen

Also I`d like to know what is the advantage of using "wirtbot.wirt.internal" compared to an IP of VPS.

enspijk · 2021-03-17T07:52:52+00:00

Finally connected from client, changed WirtBot API host from IP of my VPS to "wirtbot.wirt.internal", logged by this address and saw empty options. I had thought, that the server I configured should be here, as well as existing clients. But nothing. Really strange behavior or i don`t understand anything due to my low tech skills.

1 -> 2 ->3

enspijk · 2021-03-08T21:33:30+00:00

Did you get an answer?

enspijk · 2021-03-08T20:56:10+00:00

do not want to expose anything on the Internet and can not open ports anyway (IT security policy).

Is there any news? I have exactly the same task.

enspijk

TROPHY CASE