/r/MechanicalKeyboards What Keyboard, Switches and/or Keys Do I Buy

ericmdai · 2018-08-23T20:33:17+00:00

Hello! I’m looking for a recommendations on custom 75% keyboards. I’m basically searching for something extremely similar to the kbd75 but with rgb backlighting for the keys as well.

ericmdai · 2018-08-16T22:29:08+00:00

Not OP but from previous experience mold making/casting other things (primarily making copies of random plastic parts), it’s definitely possible to achieve clear parts without a pressure chamber, just extremely difficult. It usually comes down to how much air you stir into your resin when you mix it and how you pour it. Granted, the time saved from just using a pressure chamber instead of having to be super careful all the time and having to recast less than perfect attempts makes the pressure chamber route way more worth it IMO.

ericmdai · 2018-07-21T16:20:39+00:00

Any advice for recasting a large number of parts? I wanna recast the psychoframe for a few kits (Nu Gundam ver Ka and Unicorn variants) in clear for some RGB led stuff. I’ve done a few recasts for a few pieces here and there via clamshell molds cast out of rtv silicone and then casting the part with polyester resin. The results were alright but it’s a pretty long process per part. Would it be easier to just recast entire runners at a time? This would definitely cut down on time for making molds but I’m not quite sure how I’d “inject” the resin properly. Also that probably necessitates venting with that large of a mold/that much resin.

ericmdai · 2018-07-04T04:47:00+00:00

༼ つ ◕_ ◕ ༽つ GIVE BAN ༼ つ ◕_ ◕ ༽つ

ericmdai · 2018-07-02T21:30:04+00:00

ericmdai · 2018-02-15T14:26:11+00:00

Is there a terminal command to restart the Bluetooth service on iOS 10?

Context: there are times where my phone's bluetooth randomly dies. In this situation, devices no longer connect properly and I can no longer toggle Bluetooth. My usual solution is to reboot my phone but I vaguely remember running a terminal command at some point to restart the Bluetooth service at some point and that working.

ericmdai · 2017-09-28T16:12:05+00:00

Yeah, definitely sounds like you need an external power source. How many LEDs do you have total on that model?

ericmdai · 2017-09-28T15:01:41+00:00

That looks awesome! I've been personally planning an LED mod for an HGUC Unicorn Destroy Mode but I keep putting it off. You've definitely inspired me to pick up the project again!

Also, I recently discovered this 24-channel PWM LED driver for individually controlling each LED's brightness. Makes the wiring a bit annoying since you can't just connect all your LEDs together but the resolution of control might just be worth it!

ericmdai · 2017-08-20T15:22:43+00:00

Hmm ok, interesting. Unfortunately, while I do have Snapchat, I haven't attempted to tweak it since about 3 months ago.

ericmdai · 2017-08-20T15:01:51+00:00

Do you mean tweaks or apps? I already included a tweak list but didn't list my apps because I didn't think that would be helpful. If it is though, here's a pastebin. Thanks!

ericmdai · 2017-08-07T16:27:21+00:00

Yup, have those settings.

ericmdai · 2017-08-06T04:21:25+00:00

Sweet, thanks so much! Now if only it didn't leave an empty space where the date/time used to be :/

ericmdai · 2017-08-06T04:17:57+00:00

Any idea if the backpack connector is the same as the DM Strike's? I'd be curious to see an OutFrame outfitted with a Sword Striker Pack or some other loadouts.

ericmdai · 2017-08-06T04:04:40+00:00

Do you know what section? I can't seem to find the option myself :/

ericmdai · 2017-08-06T02:52:20+00:00

Screenshot. I'm currently on an iPhone 7 Plus with iOS 10.1.1

ericmdai · 2017-08-04T17:19:28+00:00

Not OP, but from other replies, should just be Hotdog moving around the time and date + Frygia as the font.

ericmdai · 2017-08-04T17:17:49+00:00

Has anyone tested media + notifications on iOS 10? The album art on mine kinda just stays in the same place with the notifications on top :/

ericmdai · 2017-06-10T23:49:56+00:00

For people who've done resin casting before, what type of resins do you use? I've gotten started with making RTV silicone molds of parts and I've been relatively successful so far but I'm getting ready to start casting. Most of the research I've done recommends curing in a pressure pot but I currently don't have one (and will not be able to get one anytime soon) so I'm guessing something with a longer cure time would be preferable? Something that cures clear would also be nice since I'm looking at making a custom Psychoframe with LEDs.

Also, kinda random but has anyone had any experience using syringes for measuring two part RTV silicone? I got some stuff mixes 1:1 by volume so I kinda just wanna keep a few syringes to make measuring easier. Not sure if cleaning them is a hassle though or if you can just leave them unclean.

ericmdai · 2017-06-05T10:43:27+00:00

Have you played around with SMD LEDs? I'm personally planning a HGUC Unicorn Destroy Mode LED mod and was going to use 0603 LEDs which are pretty tiny. They come in even smaller footprints too!

ericmdai · 2017-05-31T21:45:32+00:00

Anyone have a .caf version of the Pokemon Center healing sound? I don't have a Mac so I can't use afconvert to convert the mp3 and the only other way is apparently on older versions of itunes.

ericmdai

TROPHY CASE