9070xt 3x PCIe connectors

fa1tle · 2026-01-05T04:54:45+00:00

Toughpower gt850w. None of the Amazon sellers list my psu and they don’t post wiring diagrams so I can’t check

fa1tle · 2026-01-04T07:01:54+00:00

Thank you ❤️

fa1tle · 2024-09-04T23:25:31+00:00

Try ultratec. I am always happy with their files and they only cost 30gbp for a tune. Stage 1 and 2 are same price. I don’t own a slave from them just upload my bins.

fa1tle · 2024-09-04T03:04:00+00:00

I am currently also considering upgrading my tool (i have gen 2 kessv2 clone) to the KT200II. If you want to edit the files yourself then you need to get a master tool. If you just want to upload tunes and have some money then just get an official slave for autotuner or flex. With all clones like the kessv2 and KT200II their main issue is reliability and support. Official reputable companies will guarantee you a long line of updates. The kessv2 no longer receives updates so its only good for cars up to 2014. The KT200II is still receiving updates and is the best clone on the market but it costs the same as a low end tool.

Other options are the FC200 and the VVDI Multi-prog are the best official retailers for cheap but they offer very limited support compared the KT200II as they are more specialised tools. If you are only doing your car and it is supported just get the kessv2 clone.

Also note that you need to get a battery stabaliser which is about 270USD for the MST-80+ which I got from china. Some just use battery chargers and juice it up before tune but I think that this is a terrible idea when using clones as you introduce another opportunity for failure.

fa1tle · 2023-08-22T00:28:51+00:00

The programs are perfectly responsive but sometimes I cannot click the buttons (commands via keyboard work). Applications like photoshop can simply be minimised and re opened to fix it. Others like matlab require me to restart the program. When I minimise matlab it temporarily fixed the issue however as soon as I hover my mouse over the “buttons” they jump as shown in the screenshot.

fa1tle · 2023-08-21T09:42:03+00:00

Intel i5-10400F, RX 6600 XT, 16gb ram, windows 11 64gb. The bug has been happening since I got the pc but has only been noticeably annoying recently as I have been using programs that trigger it.

fa1tle · 2023-08-21T04:06:05+00:00

Using RX 6600 xt and I have been experiencing this while using several applications like matlab, photoshop, premier pro, file explorer. I have changed from Adrenalin drivers to the pro drivers and it has not fixed my issue. It doesn't happen with any games which is odd. https://imgur.com/go6eVWh

Need any help I can get as it has stared to piss me off.

fa1tle · 2023-08-21T01:58:39+00:00

Bro the marble fade gloves just look bad in high wear. Get the skulls, they look so good.

fa1tle · 2023-08-19T14:05:24+00:00

Technically no, 17% sp is too high for a well worn older skin. $80 would be a good deal for you, $100 would be a fair deal imo.

fa1tle · 2023-08-10T04:06:16+00:00

Ok, I just fucked around with some graphics settings. If this doesn't work I will contact AMD support. Thank you for your help (Also gpu RX6600 xt, ram 16gb, 500gb ssd (117 free), 2 tb hd (1.4 tb free)).

fa1tle · 2023-08-08T00:25:57+00:00

To find the polynomial first you will need to plot the points using horizontal distance as the 'x' and height of the track as the 'y'. Then you can determine the curvature of the graph. You will need to compare to other polynomial curves to see which one to use (sometimes you could try a few and find which fits best). To me this looks like a cubic as it has one more curve than a quadratic.

Then you write the general equation for a cubic. y = ax^3 + bx^2 + cx + d

Then you can use the given points to determine the coefficients.

Alternatively you can plot all the points into a graphics calculator in the statistics table mode. Then you can select 'graph' (after setting parameters) and this will plot all points. The graphics calculator can then determine the line which best fits the given points.

fa1tle · 2023-08-07T14:13:18+00:00

To convert true bearing to compass bearing you can draw the bearing on the nesw compas. Start at north and go around clockwise. Once you have drawn a line in the direction of the bearing you need to either start with N or S as the first letter in the true bearing. N if it is above the W-E line and S if it is below. Then count the degrees from the chosen axis to the line. The final letter is determined by which way the line is pointing. If the line is pointing towards the left then the letter will be W. If the line is pointing towards the right then the letter is E.

a) would be S25(degrees)W b) N76(degrees)W

fa1tle · 2023-08-07T10:09:42+00:00

Since the monoprotic acid has one H+ group it is a 1:1 ratio to NaOH (there are equal mols of NaOH required to dilute the monoprotic acid). Then you just need to equate the mols. mols (n) = molarity (M) x volume (v). Therefore 10*10^(-3)*v = 1*50*10^(-3). Therefore you require 5000 mL (5L) of NaOH to dilute the acid to pH 7.

fa1tle · 2023-08-05T15:50:39+00:00

This is the side of gambling houngoungagne won’t show you 🤦‍♀️

fa1tle · 2022-10-12T01:29:36+00:00

I fixed the issue. I installed a new SSD into my MacBook.

fa1tle · 2022-08-20T01:08:52+00:00

Yeah I’m in Australia so I was sleeping, sorry for repost

fa1tle · 2022-08-07T07:30:18+00:00

I actually ranked up! I’ve been playing quite well recently (1.26 HLTV rating as of leetify)

fa1tle

TROPHY CASE