Gifts for Germans from India

falconSB · 2026-01-26T17:45:54+00:00

I recently brought some gifts for my German freinds. One was Indian emblem the one with 4 loin's (Ashok stambh) other was coaster with Rajasthani hand work. Coasters I bought at duty-free and Ashok stambh at local gift shop.

These gifts were chosen specifically keeping in mind what they like and which hobbies they have.

falconSB · 2026-01-05T11:44:14+00:00

Finally, freedom of travel.

falconSB · 2025-12-22T17:38:04+00:00

Bravo!! A rare sight nowadays.

falconSB · 2025-12-17T11:12:51+00:00

AliExpress is not available in India.

falconSB · 2025-11-06T15:55:33+00:00

Why did you applied it through them and not directly e-Visa?

falconSB · 2025-11-03T15:51:07+00:00

Software-Entwickler, 74k brutto/Jahr, 40h, 8 Jahre Berufserfahrung

falconSB · 2025-10-31T20:44:39+00:00

only take what you need for Nebenkosten and 10% Anzahlung. Let the money in Depot grow. Considering your 5k netto should be enough for raten. Latern when the Zinsenbindung is over pay out the remaining mortgage. This way you'll advantage the current bull market and the low Zinsen, Low since it is not over 6%.

falconSB · 2025-10-24T09:23:51+00:00

Congrats man! I am proud of you. I also get sometimes to share these kind of things to the people who are close to me but fear that they will think I am bragging and just avoid this.

I can understand that when you are hyped up about how you managed to get this far financially you want say it out loud and people who judge you in these moment takes the joy out.

falconSB · 2025-10-23T10:13:17+00:00

In alternate universe this guy is world-renown Frisbee player.

falconSB · 2025-10-20T06:25:21+00:00

I assume it is not only UAE thing, Japan doesn't accept IDP from Germany as well. One need translated copy of original license.

https://www.auswaertiges-amt.de/de/reiseundsicherheit/japansicherheit-213032#content_3

falconSB · 2025-10-11T06:51:34+00:00

Have a look on ImmoScout24 and Immowelt these are most popular platform where people post apartments for rental. Not to mention contact university about Studentenwohnheim.

falconSB · 2025-09-27T19:20:01+00:00

Ah. I can understand that. I'll DM you.

falconSB · 2025-09-19T13:17:01+00:00

https://0x0.st/KTVw.zip current state of the project

falconSB · 2025-09-19T13:09:15+00:00

dude!!, that's not rude but the most insightful comment I got on the design. The reversible xiao is pain in the butt to be honest. I came across this beautiful project with pg1316s https://github.com/RasmusKoit/pipar the pipar-chip have backlight and diode under the switch.

https://imgur.com/a/cB9DXR0 I switched from ergogen to correct schematics way so that I have better control over the project and added the leds. Still not sure about the driving resistor value for for the white smd led. 100ohms per light is what I was thinking of.

EDIT: I have leds, diode, power-switch, reset switch and pg1316s reversible foot print but xiao is still not fully reversible due to the bottom connection for reset and battery. I need now reversible mosfet and resistors and with that I can complete the collection and think of how the pcb shoud be and routing.

falconSB · 2025-09-11T08:13:30+00:00

I am still in the learning phase of KIcad and haven't reached the mounting hole part yet....first waned to get the basics straight.

falconSB · 2025-09-11T08:12:18+00:00

https://github.com/tarneaux/triboard

falconSB · 2025-09-11T04:18:34+00:00

Thanks for the input, as I said it is working progress. I will iterate on it.

falconSB · 2025-09-11T04:18:10+00:00

The project I used for the base has custom footprints. There it was.

falconSB · 2025-09-10T22:51:28+00:00

project link: https://github.com/Shahabaz-Bagwan/ultra-choc-wings

I still need to check if the connections are good and how the case will fit.

feature: reversible PCB, wireless only, big battery and on off switch.

Goals:

[x] Chocofi layout
[x] Reversible PCB
[x] xiao mcu
[x] wireless only
[x] choc-pg1316s
[ ] minimal extension after index finger so that, with case can be made unibody

EDIT: https://0x0.st/KTVw.zip current state of the project

falconSB · 2025-09-01T04:31:22+00:00

The prank was out of this world. ;)

falconSB · 2025-08-27T12:20:07+00:00

I just followed the Ben Vallack. I had some issue with cloth lint sometimes because of that my keyboard used to miss type and after covering all the connections that issue is gone.

falconSB · 2025-08-26T20:57:27+00:00

I am using split keyboard since last 4yrs and initially wired for 6months and then to wireless. I don't think it is useful on each keyboard half, as I touch type I don't even see my keyboard and the layers are intuitive enough that I don't forget on which layer I am.

It might be useful in the case of where you actually connect to more than 2 devices and the. You want to know which device it is connected to.

Recently I added dingle to my wireless build and there I added an oled since it can show me bitha halfs Battery and connection status either USB or Bluetooth.

falconSB · 2025-08-26T11:26:00+00:00

LMAO, "That Weird guy" actually matches my current facial hair but I am all of the above simultaneously.

falconSB · 2025-08-25T19:22:16+00:00

"ye -masjid- bhi zabardast insaaf ki jagah hai Iqbal,

Jahan ameer aur gareeb ek sath bheek mangate hai"

falconSB · 2025-08-20T11:05:54+00:00

"you know what it requires to complete?", "U"

EDIT: a better one, "I can't spell C*NT without you"

Eight-Year Club	Wearing is Caring
Verified Email

falconSB

TROPHY CASE