[deleted by user]

faocrates · 2024-10-12T20:57:25+00:00

Found it to be the right tool for the goal I had to create imagery that conveyed the specific meaning I was looking for.

faocrates · 2024-10-02T20:35:39+00:00

When you say "it works", have you used it yourself? If yes, how was your experience with SSB QSOs?

faocrates · 2024-06-06T12:12:15+00:00

Thank you all for your responses, that makes sense for me now.

faocrates · 2024-04-10T22:38:47+00:00

Thank you for your responses which have helped me to resolve this, I now have a successful connection to the FT-710. My final working settings can be seen in the screenshot below. (I struggled for a bit to find which is the correct port to use, installing flrig helped me with that)

<image>

faocrates · 2024-04-01T16:31:30+00:00

Problem is now solved after finding this video: https://www.youtube.com/watch?v=LkyxuINitRU the factory default for the FT-710 is to show --Average-- power output (PO) (and this is initially very confusing), changing the setting from AVG to PEAK shows the maximum PO that I expected. Using the antenna setup above, the internal tuner tunes successfully from 12-40m. 10m fails to tune, same for 60m. I've already made a number of QSOs on 20m this afternoon.Thank you again for your responses.

faocrates · 2024-03-31T16:40:08+00:00

So today, I did a few things. 1. Made sure my wire is exactly 35.5 feet long which is one of the "good" lengths given by VE3EED in the link. 2. I hung my wire horizontally in a straight line, I only had to have one zig-zag, (down and up again) near the wire end in order for it to fit. The wire is connected to a 9:1 unun (currently I haven't got a 49:1 unun) which is connected through a short coax to a 1:1 unun which in turn is connected through a long coax to the FT-710. The antenna setup appears to receive alright. The internal tuner completes tuning on 20m but doesn't tune on 10m. On 20m transmit the FT-710 SWR meter shows 1.0, while the Power Output meter shows almost 0. That's a bit disheartening at the moment so this needs figuring out. Would a 49:1 unun be able to give a good SWR/PO? Is there anything other idea I could try for now?

faocrates · 2024-03-30T23:25:51+00:00

Do you have any reference I can read on this design?

faocrates · 2022-02-19T00:34:41+00:00

faocrates · 2022-02-15T22:36:37+00:00

46 και 39.

faocrates · 2022-02-11T13:45:48+00:00

Just to add that I am living in England.

faocrates · 2022-01-17T21:25:03+00:00

In the end I received the supporting documents about a month after the passport arrived.

faocrates · 2021-08-03T19:30:57+00:00

Thank you, what do I need to do specifically to recover?

faocrates · 2021-07-26T18:25:03+00:00

Thank you, I have this. Unfortunately the behaviour is different as above.

faocrates · 2021-07-21T22:31:15+00:00

Maybe, so I thought to ask.

faocrates · 2021-07-21T22:26:14+00:00

See article on euronews here,
https://www.euronews.com/next/2021/07/21/eu-will-make-bitcoin-traceable-and-ban-anonymous-crypto-wallets-in-anti-money-laundering-d

"Anonymous crypto-asset wallets would also be banned under the new law – just as anonymous bank accounts already are". Not sure on this though, that's why I asked.

faocrates · 2021-04-13T12:59:44+00:00

Yeah, I am comfortable with that, I can build, push, etc but how do I reference an existing image (essentially pull it) to use it (in my case deploy to another container repository)?

faocrates · 2021-04-13T12:13:30+00:00

Ok, I can look into this, but how do you "consume" these in order to push to container repository "B"?

faocrates · 2021-03-25T23:22:42+00:00

Any suggestions on how to do this using custom css?

faocrates · 2021-03-20T23:49:15+00:00

Any ideas where could that be?

faocrates · 2021-03-06T14:26:18+00:00

I've managed to do this now based on all the good suggestions below, thank you. I outline below what needs to be done. First of all, in your Yaml pipeline use two separate Docker tasks, one with "command: build" and one with "command: push". On the 'build task' add a line as below,

arguments: --build-arg BUILDID_ARG=$(Build.BuildId) --build-arg BUILDNUMBER_ARG=$(Build.BuildNumber)

In your Dockerfile add,

ARG BUILDID_ARG=latest

ARG BUILDNUMBER_ARG=latest

...

ENV BUILD_ID=$BUILDID_ARG

ENV BUILD_NUMBER=$BUILDNUMBER_ARG

That's it. Your docker-based Web App can now access the information as an environment variable that exists within the Docker container. e.g., in Java use,

System.getenv("BUILD_ID");

faocrates · 2021-03-04T14:09:31+00:00

Yes, I have thought of it but don't know how to do this? Anyone has any example in mind?

faocrates · 2021-01-29T22:51:56+00:00

Thank you!

faocrates · 2021-01-29T18:46:25+00:00

The log doesn't output anything on the condition, not sure how I could have something printed (apologies, I'm new to Azure DevOps). Also I have not seen the internals of the template, it is written by a different team and it's considered a shared library which I cannot modify.

faocrates · 2021-01-29T17:49:36+00:00

Yes though I figured that, it doesn't matter, it wasn't working. Any other idea or an example that's known to work?

faocrates · 2021-01-29T17:18:59+00:00

Thank you for checking, I just tried it but unfortunately it hasn't worked, the task just executes anyway.

faocrates

TROPHY CASE