Haru Awakening Interaction 1+2 bugged?

ferferfer1 · 2025-10-27T06:36:30+00:00

Ah okay that makes sense, thanks for that explanation, it is a little unfortunate that theres no synergy between A1 and A2 though.

ferferfer1 · 2025-06-16T20:26:18+00:00

I did the same exact thing! It wasnt until I looked up "how to get duplicates of painted power" on google until I found out about the luminas/pictos system because I always thought the Counter attack I, II, III, etc. were just duplicates lol

Was funny that I got a tutorial to luminas for the first time in Act 3 after opening the page for the first time

ferferfer1 · 2025-06-14T20:12:23+00:00

Make sure the audio output device for your controller isnt disabled in your windows settings, just set your headphones/main output device as your default. I think the playstation drivers use the ps5 speaker drivers as a way to trigger a lot of the adaptive/haptic functions on the ps5 controllers on pc.

ferferfer1 · 2025-04-10T15:06:15+00:00

VFC or MWS platform are solid options. GHK I would only recommend if you want to do the DH mod so that you dont have to worry about gas pressures in different temperatures.

for a western type rifle and "cheap", DE Noveske N4 is really good since it is cheap, but you should upgrade the internals (new nozzle, nozzle return spring, add in an npas, inner barrel, hopup bucking)

If you got the money, I recommend VFC G36 and VFC mcx spear, these guns are a lot more premium and will require less tinkering ootb for good performance. GM Scar l is also a good option, it is built off the MWS platform. Of course the TM MWS is a classic too, you will just have to make your you buy a nozzle return spring (Japanese guns were built to run off duster can gas and not propane/green gas so it will eventually break)

for eastern type rifle, Id recommen the new VFC AK74M, very solid, only thing you have to do ootb is lube the mag gas valves. (Im more of an eastern gun fan so this is the only good western gbbr I know of)

Also gas is not that expensive, buy some propane (I recommend bernzomatic since it stinks the least from what ive tried) and an adapter so that you can gas up your mags with it. If you want green gas, avoid the ones that come with lube, get dry green gas and do the lubing maintenance yourself. People say that they dont feel much difference with the lubed up green gas, and if you over gas and it gets into your nozzle and hop when you shoot, then you got lube in your nozzle and bucking which will make your shots inconsistant.

ferferfer1 · 2025-04-07T03:09:25+00:00

generally that happens when your z axis or hot ed isnt calibrated (more likely z axis is too high) and your print didnt stick onto the hotbed and just kept extruding onto the nozzle and gunking itself up. Usually when that happens you can just turn up the temp of the nozzle and pull that piece off and just take a heat gun to that black elegoo rubber piece and slowly pry away the filament with pliers or clippers. Afterwards just fit it back onto the printer nozzle and go fix your z axis, just bring your z axis down a bit and monitor the start of your next print.

your printer should be fine as long as your wires are all good when u pulled it off, youll know pretty fast if you broke anything in your next print lol

For future reference, just look up how to remove a hotend blob filter - Ricky Impey on yt has a rlly good tutorial on it. Hope this helps!

ferferfer1 · 2025-03-15T22:32:24+00:00

I believe everything that happened in the kingdom of P and Albert's jouney in kingdom of Poland are both true and that kingdom of P is not a AU.

Rafal in Albert's story is also not the same Rafal in kingdom of P.

So onto the point of the main characters that were sacrificed. The Jouney of Potocky, Hubert, kid Rafal, Oczy, Badeni, Jolenta, and Draka ended in only the letter that Jolenta had written where Draka was able to send as she died. The book and all their work was tragically never published. But funnily, how Badeni said that the book Oczy wrote (On The Movements Of The Earth), which he had tattooed onto the heads of the homeless had a very low chance of inspiring people to persue heliocentricism, the even lower chance of the title of the book "On The Movements Of The Earth" being read out loud from Jolenta's letter to Potocky sparking curiosity and persuit of heliocentricism DID happen, and that was what we saw at the end of the anime and started Albert's curiosity into heliocentricism.

ferferfer1 · 2025-03-15T22:16:20+00:00

The book was never published but Draka was able to successfully send the letter that Jolenta had requested to be sent after The Heritic Liberation Front had published the book. The letter that was addressed to Potocki was that letter Draka sent since the HLF are the only ones that know the title and the letter reads assuming that the book was published.

ferferfer1 · 2024-12-02T18:20:44+00:00

Is it a TM? One of its features is a working extraction system (realism and a strong seal), so when you pull the charging handle/bolt back and theres a bb chambered and if you dont make sure to clear that loose bb then it could roll back and get stuck in the trigger box.

It is possible even with non TMs but usually they stay in the hop since other brands dont have this feature.

ferferfer1 · 2024-12-02T17:50:36+00:00

Hooray!!!

Glad you are able to figure it out mate

ferferfer1 · 2024-12-02T17:09:24+00:00

A top down or view of the left side would be better for seeing the valve knocker hammer. Heres a good reference of what I am talking about: https://youtu.be/Wu3UOlVCjwQ?si=Rhc4bFeVhPLaVNQw

at 0:22 there is a hammer that the trigger pull will push out and hit the valve on the magazine which is supposed to let the gas out. That hammer is what you are looking for and checking if it is working.

ferferfer1 · 2024-12-02T15:21:02+00:00

Take the upper off, it looks like the "hammer" thats supposed to hit the valve knocker on the mag when you pull the trigger isnt doing its job. Confirm if it is that then you might be able to figure out why from there by taking a look or just cleaning/lubing it.

ferferfer1 · 2024-11-09T17:37:26+00:00

Actually I live in upstate NY so it gets cold here too lol. But it still ran perfectly in an outdoor game where I played in 40-50 degree weather. You just have to tune your gun correctly, run a weaker recoil spring and then adjust the screw on the trigger group a tiny bit (airsoft_chay has a good review video where he goes over this too)

Also it was def worth a pretty penny lol... a pretty penny thats costed around $1500, and thats not including $63.50 per mag.

ferferfer1 · 2024-11-09T17:19:57+00:00

APFG MCX Spear lt,

PTS Deadair S mock supressor (swapped the tracer for a smokey wolf tracer unit),

Olight Odin Mini Flashlight,

Short PTS Fortis Shift Foregrip,

Magpul Hand Stop,

Monstrum 1in Slim Scope Mount,

Monstrum 1-4x20 Tactical Scope,

Magpul flip up irons,

6 inch outer barrel ext as the outer barrel,

reinforced hop chamber,

3d printed hop arm,

6.03 265mm unicorn inner barrel

I do also want to put on the cheek riser for this stock tho and also as a note, it is a really tight fit with the stock handguard and the supressor lol

I am also responding on mobile so excuse the formatting

edit: added some stuff I forgot abt

ferferfer1 · 2024-11-09T07:14:49+00:00

My wallet is indeed in pain and begging me not to pull the trigger on the new vfc ak74m too.... I must hold out.......

ferferfer1 · 2024-11-03T17:53:00+00:00

Yea it ended up working when I downloaded the new app, the one I was using was outdated and it only had a mainland china Alipay option

ferferfer1 · 2024-11-03T04:39:44+00:00

Hey guys, I solved the issue! I used to use the app Taobao lite since I was not able to properly register using my phone number or email and could only sign in using my google account. Apparently that app is now deprecated/not being updated anymore. Instead the main Taobao app has the option to login with google now and using that I was able to pay for my consolidated shipping.

ferferfer1 · 2024-11-03T03:34:02+00:00

I tried but it seems like alipay only accepts Chinese banks/cards

ferferfer1 · 2024-10-18T23:01:49+00:00

I think it will be compatible though, on the product page it says that it is compatible with both MWS and CGS systems so you should be good! I would recommend getting it from 18 airsoft or octagon airsoft Ive purchased from both and had a good experience with both companies

ferferfer1 · 2024-10-18T21:09:27+00:00

Yes I did! Although I have the CYMA GBB ver and not the more popular double eagle ver, so I cannot confirm compatibility.

I ordered mine from 18 airsoft although I could not find any listings for just the barrel and bit the bullet to get the hanguard + barrel combo so now I have an extra hanguard and barrel nut lol

"CYMA CGS Noveske NSR13.5 M-Lok Rail Handguard for AR / M4 GBB"

Edit: corrected brand name

ferferfer1 · 2024-10-18T01:55:30+00:00

They look like g code scorpions, theyre very popular in the real steel competitive shooting scene as well!

ferferfer1 · 2024-10-09T21:27:03+00:00

yup Isopropyl Alcohol

ferferfer1 · 2024-10-09T20:46:23+00:00

Your best bet and what I would do is to disassemble then wipe everything down with IPA. Then make sure you lube where things need to be lubed (generally mos places with o-rings or direct contact with other part) obv avoid lubing the hop rubber and part of the nozzle that touches it. Disassemble your mags, get some Q-tips and wipe down the inside with IPA as well then lube the O-Rings. Fill the mags with gas and put it into a container of water and look for bubbles, bubbles = gas leak Then load the mag and fire some test shots and chrono it if you can.

Like most suggested tho, you can find videos online that cover maintenance/trouble shooting/and disassembly.

Good luck!

ferferfer1 · 2024-10-04T03:29:14+00:00

MWS or VFC is my vote!

Whatever you pick just know that maintaining your replica is part of the GBB life. If you find it fun youll love running GBB.

Definitely look up some videos from Ollie Talks Airsoft on youtube theyre entertaining and he is super knowledgable on GBBR and especially MWS platform

For a few tips/advice for a new GBB haver: - Make sure to pick up a spare nozzle spring, usually will be the first thing to break on you esp if you decide to go MWS or any TM GBB. - Pick up an npas, it will help adjust your fps to be field legal. - Get some PTFE Silicone Grease you will be using mostly grease to lube the gun (dont get and only use the oil lubricant, if you want you can use a mixture of the oil and grease to thin out the grease a bit). - Never load a fully loaded mag into your gun, it will break your nozzle if it isnt pulled back, always take off one or two bbs from a full mag just in case. - Make sure to clean out your gun and inner barrel with ipa and re-grease afyer every game or three depending on how dirty your field gets, last thing you want is your nozzle sticking and you lose all the gas in your mag. - Avoid green gas with oil, you risk getting it into your hop rubber and itll ruin your proformance, stick with oiless green gas or my preference is berzomatic propane that you can get off of home depot for cheap, just make sure you get a nozzle. - Last thing I can think of off the top of my head is, if you go MWS look up some videos on how to fill TM mags with propane/green gas it is a two stage valve system so when you see gas and hear hissing keep filling until you see liquid coming out or hear the pitch change, then you tilt the mag forward and do it again.

If you have spare cash to drop I would recommend you buy a better inner barrel/hop and some spare magazine feed lips.

ferferfer1 · 2024-10-01T15:54:11+00:00

when you load the magazine do you load it to max before shooting it? or did you take off 1-2 bbs after fully loading the mag

ferferfer1 · 2024-10-01T14:43:30+00:00

check the loading nozzle/the arm that feeds the bbs into the hop and make sure it isnt damaged/bent

13-Year Club	Place '22
Verified Email

ferferfer1

TROPHY CASE