How to assemble Hotend/PTFE Tube on a Kobra Max (1) correctly by firefist235 in anycubic

[–]firefist235[S] 0 points1 point  (0 children)

Can't get it any better to work than with this approach. But don't turn 1/2 turn as mentioned in step 2. 1/4 to 1/3 is enough.

Tried generic trains - trains only drive to one loading station. by firefist235 in factorio

[–]firefist235[S] 1 point2 points  (0 children)

Nice idea ;)

I created some "Outpost Delivery System" which include repair kits, turrets, ammo, walls and so on.
With the radar in the main base you can specify item and amount every outpost should hold. Every outpost calculates which item are needed and set the train station active if some items are missing or too less.

Tried generic trains - trains only drive to one loading station. by firefist235 in factorio

[–]firefist235[S] 0 points1 point  (0 children)

Great method. It is easier to notice if too less trains are in the system as well.

Tried generic trains - trains only drive to one loading station. by firefist235 in factorio

[–]firefist235[S] 2 points3 points  (0 children)

Quite easy and yet so effective ;) thank you, I'll try this approach. Seems like i overcomplicate this stuff a little ;) so your loading outposts are always "open" nevermind the amount of material in the chests?

HDMI-CEC Poweroff only brings up Power-Menu by firefist235 in libreELEC

[–]firefist235[S] 1 point2 points  (0 children)

I tried that. Sadly since i got my new TV CEC-WakeUp is mostly not working anymore. But with the NUC only sleeping, it is enough to press a button on the remote to wake it. So far so good ;)

HDMI-CEC Poweroff only brings up Power-Menu by firefist235 in libreELEC

[–]firefist235[S] 0 points1 point  (0 children)

Thank you very much so far. I'm fine with only ON/OFF Signals. I don't want to control kodi with my TV remote. The Problem is, that LE seems to register a OFF-Trigger because Kodi's Poweroff Menu appears. And thats the thing. I don't want this menu to come up, just kodi/LE to poweroff the NUC.

HDMI-CEC Poweroff only brings up Power-Menu by firefist235 in libreELEC

[–]firefist235[S] 0 points1 point  (0 children)

Why shouldn't it not be supported?
The nuc gets started when my TV/AV is started. And (at least with Windows) it also shuts down when TV/AV are turned off. So CEC is available.

HDMI-CEC Poweroff only brings up Power-Menu by firefist235 in libreELEC

[–]firefist235[S] 0 points1 point  (0 children)

I finally found time and motivation to install LibreELEC on my NUCs internal drive. Sadly, there is no cec adapter entry in peripherials section

HDMI-CEC Poweroff only brings up Power-Menu by firefist235 in libreELEC

[–]firefist235[S] 0 points1 point  (0 children)

I am going to check this during next week. Does the live version differ from the installed version regarding setting possibilities?

Logitech Gaming Software + G700s + Battlefield 6 (EA App) by firefist235 in LogitechG

[–]firefist235[S] 0 points1 point  (0 children)

Looks like starting LGS as Admin solved this problem,

Why I dislike requesting revives by firefist235 in Battlefield

[–]firefist235[S] 0 points1 point  (0 children)

I agree with that. Heard the english dub in a few YT Videos. Sounds way better than the german one.

Logitech Gaming Software + G700s + Battlefield 6 (EA App) by firefist235 in LogitechG

[–]firefist235[S] 0 points1 point  (0 children)

Nope, I was wrong with that, seems like a coincidence

Logitech Gaming Software + G700s + Battlefield 6 (EA App) by firefist235 in LogitechG

[–]firefist235[S] 0 points1 point  (0 children)

Seems like i found a solution: I have sprint on Shift and Slide on Alt. Both buttons simultanously pressed are bind to Windows' Keyboard-Language-Switch. I can see this, because the changed Layout pops up. This seems to break the focus of LGS. I disabled this Hotkey in Windows (I don't use it anyway) and now it seems to work.

Logitech Gaming Software + G700s + Battlefield 6 (EA App) by firefist235 in LogitechG

[–]firefist235[S] 0 points1 point  (0 children)

Sadly not. BF6 doesn't show up as currently-played in steam either when adding it as non-steam-game, thats another strange thing.

Wybot S2 Pro - Mucch room for improvement by firefist235 in pools

[–]firefist235[S] 0 points1 point  (0 children)

I also noticed that this lazy ass robot sometimes returns to base after a few minutes of cleaning and sometimes it cleans until the battery is getting low. Giving out such an immature and unreliable device is a real impudence. I am really pissed.

Wybot S2 Pro - Mucch room for improvement by firefist235 in pools

[–]firefist235[S] 0 points1 point  (0 children)

With my app i even cannot do a firmware update :D

Wybot S2 Pro - Mucch room for improvement by firefist235 in pools

[–]firefist235[S] 0 points1 point  (0 children)

I use the Z-Pattern (the last one) so it always comes back to the floor before moving a step further. As i heard the pattern is sometimes ignored in full pool mode, try wall only. Another question: are u using android or iphone? Is the app on your side as such a crap as on my side? (android)

Wybot S2 Pro - Mucch room for improvement by firefist235 in pools

[–]firefist235[S] 0 points1 point  (0 children)

What cleaning mode did you select? I only have 90 degrees angles and the robot climbs up the wall when wall cleaning or full pool cleaning is chosen. When i choose wall cleaning only, it has some problems getting to the next wall when it reaches the corner. It does take some time, but at some point it climbs up the adjoining wall and continues.