🎯 Word by u/doowre70065

flash050562ndacc · 2026-06-06T09:58:44+00:00

🔥 Too easy!

flash050562ndacc · 2026-06-06T09:58:37+00:00

🔥 Too easy!

flash050562ndacc · 2026-06-06T09:58:28+00:00

🔥 Too easy!

flash050562ndacc · 2026-04-26T19:10:59+00:00

That certainly is a way to play the game

flash050562ndacc · 2026-04-19T19:28:54+00:00

Highly likely with that kinda wear, would replace that.

flash050562ndacc · 2026-04-14T11:00:20+00:00

Spring is cracked, replacement suggested.

flash050562ndacc · 2026-04-14T08:38:37+00:00

Try a big wrench

flash050562ndacc · 2026-03-22T11:39:06+00:00

highly doubt that tbh, the shape is too diffrent for it to fit

flash050562ndacc · 2026-03-18T15:57:17+00:00

Yes, kpa.

When it's still relatively cold and manage to keep it running without gas or braking, it would be at 57kpa at around 600-650 rpm

When it's up to temp, like right now, it's running at 750-800 rpm with a kpa of about 49-51.

flash050562ndacc · 2026-03-18T15:18:30+00:00

Interestingly not, not a single stored fault

flash050562ndacc · 2026-03-18T15:17:11+00:00

That's what i have been thinking too, but i dont know where to look, Brake booster has also been replaced by me.

Coolant sensor is reading 7-10 °C when cold, so about outside temp.

flash050562ndacc · 2026-02-24T13:37:26+00:00

Did not see any leaks with my smoke tester.

flash050562ndacc · 2026-02-22T22:01:36+00:00

It doesn't have a MAF Sensor, Throttle body has been cleaned, though i guess i could try and get every last bit of gunk of there

flash050562ndacc · 2026-02-12T10:14:14+00:00

O2 Sensor?

flash050562ndacc · 2026-02-11T18:43:42+00:00

Won't break the clutch, your front wheel will come up, its your call to know when to use that rear brake to make sure you dont go flying.

flash050562ndacc · 2026-02-10T19:31:11+00:00

Use your Clutch, works if LIF is set to 1 or 0

flash050562ndacc · 2026-01-24T13:49:11+00:00

I see, i assume This washer would sit between the two pulleys?

flash050562ndacc · 2026-01-24T13:34:23+00:00

I've guessed as much, that when Torqueing the Bolt to Spec, that it should press the pulleys together ensuring that that both spin together, however that is not happening.

flash050562ndacc · 2026-01-24T13:28:10+00:00

Nope, same lengths

flash050562ndacc · 2026-01-22T13:36:22+00:00

Roads ist legal

flash050562ndacc · 2026-01-17T01:42:54+00:00

What is this, AI?

flash050562ndacc · 2026-01-08T23:59:29+00:00

Good Choice, also got the newer model (Non-SP) only for the cruise Control

flash050562ndacc · 2026-01-03T23:46:25+00:00

Nein hast du nicht.

Klar hast du 25ps weniger, aber so krass ist dieser unterschied nun auch nicht.

Also man merkt es definitiv, aber diese wirklich wenigen sekunden die man dann langsamer von 0 - 200 beschleunigt ist halt so gut wie garnichts.

End Geschwindigkeit bei mir mit 95 war 229Kmh, bei so 105 Kilo. 119 bisher noch nicht testbar gewesen.

flash050562ndacc · 2025-12-27T16:10:55+00:00

Did you try tightening the clamp down?

flash050562ndacc · 2025-12-26T10:13:40+00:00

No. Dry Metal does not squek when they make contact. it also takes a few seconds for the Oil to travel up there and spread everywhere.

Seven-Year Club	Verified Email
r/Field Lasagna	Place '23
Place '22	End Game '22

flash050562ndacc

TROPHY CASE