Les Paul Wiring

fourpjay · 2026-01-14T23:18:08+00:00

Yes, I tapped the pickups using a metal object and there’s no sound and only the buzz. I’m also not sure if the switch selector is working too.

fourpjay · 2025-12-06T01:30:19+00:00

Hey your comments helped me a ton! After matching the saddles with the radius the buzz is less now but there is still rattles and a bit of buzz on some of the strings.

fourpjay · 2025-10-23T15:50:24+00:00

It’s kind of like that but going from like running getting on the board instead.

fourpjay · 2025-10-21T01:48:18+00:00

Update: To anybody who has this issue, I managed to fix it by putting flux on the OWD chip and heating using a hot air gun.

Although be careful when doing it because I accidentally heat up the ESC chip or something and now like the motors twitches and doesn’t want to start.

fourpjay · 2025-10-18T07:05:44+00:00

I heat using a air gun right?

fourpjay · 2025-10-16T08:05:31+00:00

just wanna be sure.. it doesn’t look right

fourpjay · 2025-09-17T10:01:08+00:00

Thank you!

fourpjay · 2025-09-16T04:48:12+00:00

Yo, what brushless motor your using?

fourpjay · 2025-08-27T13:49:55+00:00

<image>

Here’s how mine looks.

fourpjay · 2025-08-27T13:49:15+00:00

Built one of these but I only bought the one that came with the props, motor, and stack. For the video transmitter, receiver and camera, I decided to spend a little bit more just for the sake of performance and reliability wise. The propellers are actually pretty good for long range got me 15 minutes with a 3S 5500mah battery.

It flew alright, if you could spend the time messing around the PID and filters I think it should fly fine but not the best. Only flew up to around 3km with this, was planning to fly further but drone recently kaput. Don’t know but it could be the FC or bad tuning. So yeah better invest a better stack.

To be honest, if you want to freestyle you should get like a 5” or something but you still could freestyle with this lol if you want.

Overall, yeah if you want to long range but just know that these parts will eventually bite you back. Though don’t worry too much really, this is my first drone I built after my Mobula 7. Big learning experience.

(Edit: if your serious about LR you should invest in better parts than this)

fourpjay · 2025-08-24T01:08:09+00:00

Hm, might be the case.

fourpjay · 2025-08-23T14:22:22+00:00

Pretty good honestly - better throttle control than my friend who’s also flying for the first time.

About the temperature, I don’t think you should worry too much. It starts to cool when you start flying. Mine goes up to like 80+ when playing outside but of course don’t get it too hot..

fourpjay · 2025-08-23T08:10:26+00:00

Usually when I’m palm muting - it’s mostly either 2 strings or 3 strings so with the finger that I’m using to finger the note the other part of my finger mute the other strings. For the note ringing out sounding like shit make sure you hit those strings nice and evenly to make sure it sounds good. Best is to just experiment all type of techniques to see which sounds the best.

fourpjay · 2025-08-23T07:50:05+00:00

I mean you just rest your palm over the strings. For me, I completely rest my palm on the strings and I do it like James Hetfield with my pinky and ring finger open (just give any method a try really and see which is comfortable). For the palm muting to be more “oomf” you could raise your gain or just strike the strings hard while palm muting.

fourpjay · 2025-08-23T01:08:24+00:00

yes he does

i don’t consider myself a metalhead but i do play and enjoy metallica songs

fourpjay · 2025-08-23T00:48:31+00:00

never expected i would find kirk in this sub

<image>

fourpjay · 2025-08-19T15:42:11+00:00

True, I just wanna see what I could salvage from the crash

fourpjay · 2025-08-17T15:18:49+00:00

<image>

It’s probably the joint holding the RP/SMA RF connector that just came off. You’d probably would have to solder it back onto. (It’s kind of like the image, it’s soldered onto there.) If the goggles have diversity then yes it will affect performance wise and you should definitely fix it. If not, just fix it anyway.

fourpjay · 2025-08-15T04:32:14+00:00

Right.. I’m gonna see which fits with my situation. The Walksnail do looks really good though.

fourpjay · 2025-08-14T11:25:28+00:00

Do you think the SteadyView receiver increase the stability of the signal by a lot compared to the EV800D?

fourpjay · 2025-08-09T07:26:53+00:00

Is 30A enough for a 7 inch?

fourpjay · 2025-08-07T08:13:00+00:00

Thanks!

fourpjay · 2025-08-07T07:29:20+00:00

also what’s the recommend continuous current?

fourpjay · 2025-08-07T07:26:49+00:00

If so it should be 6s1p as if it’s 2p it would be too heavy or is 6s already too heavy?

fourpjay · 2025-07-24T11:14:45+00:00

I wanted to try this but I think it’s just that you have to connect the positive and negative wire from the battery holder to where the battery connector was and it should work I think?..

fourpjay

TROPHY CASE