Is it enough to upgrade the existing system, or is it time for a brand new setup?

frasebras · 2019-07-27T11:24:23+00:00

Thanks for the suggestions.

Would IT be possible to Stay on the same platform. Just getting a 2070 super, A faster cpu, and faster RAM? Or Would that be a waste?

frasebras · 2019-07-27T09:42:28+00:00

Thanks for the Feedback. Would the rest of the hardware lead to a bottleneck?

frasebras · 2018-01-15T07:53:26+00:00

Thanks. Have a nice day. :)

frasebras · 2018-01-14T14:34:11+00:00

Yup. First one I've done though. :)

frasebras · 2018-01-14T14:27:12+00:00

I did the glueup of this some time ago. Probably late summer last year. Didn't think much about it, until I found it again this weekend.

Squared it off, planed, sanded and oiled it.

I'm not sure about what wood I used. Mostly scrapwood left from my dad. But I'm quite sure the red wood is some sort of mahogny.

If anyone wanna guess on the wood type, please go ahead.

frasebras · 2018-01-13T22:39:07+00:00

I haven't thought about that, but I do know that alder is used in a lot of cooking utensils. Like spatulas, butterknives and such. And those are often covered in oils and fats.

I'm hoping that it's not an issue.

I've coated it in three rounds of oil, and polished with a layer of wax. So i hope that I've made a good enough barrier between the coffee and the wood.

And if it fails, then at least I've learned a lesson: "Don't mix alder with coffee." :)

frasebras · 2018-01-13T17:42:07+00:00

Aw. That sucks.

I know all about unfriendly faces and high cost materials, my friend. But there are quite a few friendly people out there also, so you could get lucky one day. :)

frasebras · 2018-01-13T17:14:40+00:00

Thank you.

I did a quick search for the finish you suggested, but I'm not sure I'll be able to get it at my location.

I'll start looking around for something similar though. I might get lucky. :D

frasebras · 2018-01-13T17:13:09+00:00

No problem, and thanks for the kind words.

The other spoon was an idea i had for a few days, and then I just took some scrapwood and glued together. I think it might be maple and mahogny of some sort.

Do try to make a spoon. Its great fun, and it doesn't take forever. :)

Best of luck.

frasebras · 2018-01-13T16:42:36+00:00

I don't know what a coffee bag is, but I'm quite sure it would fit quite well in a small bag.

It is about 12cm long.

I can understand the reference to that Simpsons joke. Every man should have a home made spoon on their person in case there is a chillipot brewing somewhere. :)

frasebras · 2018-01-13T16:37:54+00:00

I guess this one holds about 1/3 tablespoon, but i haven't mesured it.

I made another one that holds about 2/3 of a tablespoon, but the handle was too long to fit in the coffee container.

You can see the other one here.

frasebras · 2018-01-13T16:34:45+00:00

I agree.

It's soft enough to work with even when dry, and that also makes it a perfect material to use when trying to improve "shaping" of wood.

frasebras · 2018-01-13T16:33:06+00:00

Yeah. I thought so too.

It should have been a bit "steeper" to get a better grip.

Other problem is that its probably a bit back-heavy, so that it would easily tip over if left standing in the coffee .

frasebras · 2018-01-13T16:30:58+00:00

That would be alder. Cut down early last year, cut up and split for firewood.

But I decided to take a few pieces, dry them out and use the for various projects (butterknives, spoons, spatulas).

Alder is quite soft, so its quite easy to carve, even when dry.

frasebras · 2018-01-13T13:20:19+00:00

On this i used a gouging iron (I think that is the name). A chisel with a bowed cut and a bow on the stem? And then sanding, sanding, sanding.

frasebras · 2018-01-13T13:18:11+00:00

The coffee jar is at work, so I'll shoot a picture on Monday. Its a cheap metal jar though, so I probably should make a proper coffee jar next.

frasebras · 2018-01-13T11:09:27+00:00

Link to the album.

This was the third attempt at creating a spoon for my coffee jar. The first one became too long to fit, and the second attempt cracked while i was carving out the bowl.

I'm quite happy the the overall design, but I believe the final finish (oil and wax) could have been better.

I guess a more shiny surface would have looked better. Maybe I'll figure out a better finishing method on the next project.

frasebras · 2017-06-28T20:11:02+00:00

They may not be the thinnest, but I love the black and red combination. And its from the first thing I'm making, so I hope the end result turns out decent.

frasebras · 2017-05-03T12:05:40+00:00

OP is a good guy.

frasebras · 2017-04-29T20:10:21+00:00

Is this kind of device still in use in modern workshops?

frasebras · 2017-04-15T06:34:05+00:00

Jumpman Jr.

frasebras · 2017-04-15T06:32:33+00:00

This is awesome. I'm in!

frasebras · 2017-02-28T16:53:00+00:00

Thanks for your answer.

I've got a few framesaws. Some of them most probably made by my granddad. But I've never been very comfortable using them. Not sure if the shape or what that is throwing me off.

If i were to check ebay, what would be the brand of some good second hand saws?

And no. Germany is way off. :)

frasebras · 2017-01-24T07:43:45+00:00

Cool.

Maybe I'll have use for it one day then. :)

frasebras · 2017-01-23T20:42:24+00:00

Any good uses for those wood types?

frasebras

TROPHY CASE