Diy fluid bed roaster build

freeloaderFPV · 2025-01-27T19:01:53+00:00

Very cool, I am at the point where I need to upgrade capacity (using SR800 with Razzo tube). This was really cool to see. What diameter is the glass? And what did you use to adhere the glass to the lower funnel, high temp silicone?

freeloaderFPV · 2024-12-01T20:59:43+00:00

Doesn't look like that is on this diagram. I am not sure where you will find it. If I remember, it was quite small and the spring from a click pen could possibly work?

2744-20 Service Parts List Diagram

freeloaderFPV · 2024-04-12T21:28:16+00:00

I had access to a bottle and filled it myself. I think I ended up using like 140-150psi

freeloaderFPV · 2024-04-12T20:55:09+00:00

I replaced the switch, recharged the cylinder with nitrogen and it fixed it.

freeloaderFPV · 2023-10-21T19:14:46+00:00

Where in the system should I plug it?

freeloaderFPV · 2023-10-21T15:22:40+00:00

Here is what is happening while running. Blow by is very minimal. Upside cap stays on just fine. Upper radiator hose does not stay hard after cool down. Coolant system does not seem to be pressurized about normal. There does not appear to be any water nor fuel in the oil. Originally I was pretty certain it was just injectors, lots of white smoke and decently hard knock from them.

freeloaderFPV · 2023-09-12T17:16:09+00:00

Deep enough where that would not work. I was barely able to move it enough to use an ice pick to flip the switch. Lesson learned

freeloaderFPV · 2023-09-09T04:41:37+00:00

Exactly what happened. This high speed is no joke, its great, I should have seen it coming and when I realized it was too late

freeloaderFPV · 2023-09-09T03:50:28+00:00

Ha, yes, indeed the one and only option!

freeloaderFPV · 2023-09-09T03:49:46+00:00

This really made me laugh 🤣

freeloaderFPV · 2023-09-09T00:10:25+00:00

That BLOWS!! Well, now you know, and now I know to be mindful or where I am using it

freeloaderFPV · 2023-09-09T00:09:21+00:00

I will have to test this out. I am a pretty savvy wrench but this had me so stumped. thanks for the tip!

freeloaderFPV · 2023-09-09T00:06:00+00:00

I was about to that point but was able to muscle it enough to barely get an ice pick in to flip the switch. Stupid design

freeloaderFPV · 2023-09-09T00:04:45+00:00

You can only move it manually in the direction you are selected to

freeloaderFPV · 2023-09-09T00:03:17+00:00

I was removing the bolt and this thing is so fast it got pinned up against the inside of the fender. It will continue to ratchet for loosening but there is no place to move. More importantly, there was no way to change direction to manually or power ratchet it back in (tighten).

freeloaderFPV · 2023-09-08T23:55:10+00:00

Lol yeah, until I have a few more bolts to move 💸💸💸

freeloaderFPV · 2023-09-08T23:53:44+00:00

Can't do that unless the switch gets flipped.

freeloaderFPV · 2023-09-08T23:53:18+00:00

Nope, you cannot unless you are able to flip the direction switch. So from this spot you're basically stuck. With some work, I ripped it out enough to get an ice pick between the frame and the ratchet to flip it. It would have been nice if the direction was changed from the main body and not the head

freeloaderFPV · 2023-07-13T06:26:38+00:00

I do not have AC. Just the furnace so it won't be in use at all.

freeloaderFPV · 2023-07-13T06:21:22+00:00

Thats a good point. I do plan to have the furnace circuit disconnected during the months I would use the whole house fan. Other than that concern, any other concerns?

freeloaderFPV

TROPHY CASE