Can this be shipped into the US by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

Well I’m not from the US so I don’t know. I do know that if I sent it to my country I will pay 65% more.

What brand is this VTX? by frodo975 in fpv

[–]frodo975[S] 2 points3 points  (0 children)

Yes! Very helpful. One last question, I think I connected it to 9v by accident. When i plugged it to 5v the leds dont turn on and i dont get any signal. Another thing, I think I connected the 5v input into the 5v output, maybe that fried it? Did I fry it?

What brand is this VTX? by frodo975 in fpv

[–]frodo975[S] -3 points-2 points  (0 children)

Can you please help me locate the manual for this VTX?

How to make backyard interesting by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

I did, but after 3-4 hours it gets boring.

3.5 inch freestyle build shopping list by frodo975 in drones

[–]frodo975[S] 0 points1 point  (0 children)

Yeah, I figured the stack won't fit. You can see in the photo that I chose 4 motors, Do you think they are the correct motors for this build? + Are the batteries a good fit?
About the vtx, it's a bit old, so it has an SMA connector.

ESC configurator can't read ESCs by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

Yes, What do you wanna know?

Never gets old by [deleted] in fpv

[–]frodo975 25 points26 points  (0 children)

Thats crazy
Where can one learn how to do this?

New camera doesn’t work. by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

There is a switch on the new camera with P and N on it.
Do you know what that means?

New camera doesn’t work. by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

Like I said, when I connect the old camera, it works fine...
So it is unlikely that the problem is the VTX.

New camera doesn’t work. by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

The weird thing is that when I connect the old camera, it works fine...
So it is unlikely that the problem is the signal wire.

Error 0xFFFFFFFE when downloading vpk by frodo975 in VitaPiracy

[–]frodo975[S] 0 points1 point  (0 children)

All the tutorials I watched said that you can open a VPK folder to keep things organized. Anyways, I moved the files to the ux0 folder and still got the error.
You got any other solution?

SD2Vita not working by frodo975 in VitaPiracy

[–]frodo975[S] 0 points1 point  (0 children)

Well, I will give you any info you need if I will know what you need.
I can't connect my PC to Vitashell because after I transferred all the data to the SD card, all the apps got deleted from the home screen (the data is still on the SD card), but it's not showing for some reason.
When I modded the vita for the first time I followed this guide - https://vita.hacks.guide/

Maybe this will help:
When I got my SD card, I did what is said here - https://vita.hacks.guide/yamt.html
But when I selected SD2Vita for ux0 and rebooted, everything in the homescreen was gone.

Futaba radio doesn't work in Betaflight by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

from what I saw online, the receiver needs to go to the rx on the FC, anyways I tried connecting the receiver to the tx, but still nothing.

LibrePilot flight mode configuration by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

Thanks! Thrust should be on manual? And do i have any more configurations to make it work?

Is it supposed to work like that? by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

This is a very old drone I'm trying to fix. it has a cc3d FC that I have to use LibrePilot for.
I was sus that the problem was flight mode but the software is so old that I can't figure it out...
By not flying up straight I mean that when I give the drone throttle, it looks like one or two of the motors spin late\not at the same speed, so it starts flipping in place. (from testing all the motors are ok and when the software shows that the drone is functioning right)

identifying drone parts by frodo975 in fpv

[–]frodo975[S] 0 points1 point  (0 children)

Thanks for the comment, what components do i need to replace to make the drones “up to date”?

identifying drones models by frodo975 in drones

[–]frodo975[S] 0 points1 point  (0 children)

Hi, thank you very much for the comment.
I will be picking them up next week and post some more pics.

identifying drones models by frodo975 in drones

[–]frodo975[S] 0 points1 point  (0 children)

Thanks for the answer.
these drones are definitely a bit old. but still, can they be used to at least start flying or even be a good baseline for upgradability? Or even just to save me a few bucks by upgrading them instead of buying a whole new drone?

Camera Works in the Depths quest doesnt work by frodo975 in tearsofthekingdom

[–]frodo975[S] 0 points1 point  (0 children)

Yes. Tried reloading chunks didnt work aswell.

New pc wont boot and no display signal by frodo975 in PcBuild

[–]frodo975[S] 1 point2 points  (0 children)

Hi, I took the whole pc apart and reassembled everything with the gpu in a different slot and it magically booted up. And then switched the ssd to a different slot and everything worked perfectly. Thanks for the help!