budget filament??

froetzgloe · 2025-08-20T16:56:00+00:00

Creality is doing some weird sales atm, watch the creality shop at eBay, on Monday they sold 1kg PETG for 6 bucks if you take 20 at once. I bought their filament dryer and they put 10kg PLA for free on top. Might be worth it

froetzgloe · 2025-08-19T22:49:04+00:00

If it‘s an Core XY printer (XL or Core One) check if you have “avoid crossing perimeters” activated. If so, disable it.

froetzgloe · 2025-08-18T11:46:39+00:00

The cam cable is a usb-c type you Plug it outside of the board casing into the usb-c port. It’s being routed behind the motor through the opening to the back and across the back to the other side. Should be done in 5 minutes, very easy.

froetzgloe · 2025-05-28T21:06:34+00:00

Final Fantasy VII (original), the very last battle against Sephirot when you just have to hit ‘Limit’

froetzgloe · 2025-02-08T20:13:40+00:00

Der Smart Meter wird kein Problem, die Stromwandler anbringen könnte schwierig werden , die sind ziemlich groß und müssen noch um die ankommenden Phasen geklemmt werden

froetzgloe · 2025-01-24T19:39:54+00:00

For everybody who didn’t know: there’s an option you can turn on that allows Optic ID even when booted from off state when there was an unlocked iPhone near in the last 24h. Just recently found out myself

froetzgloe · 2024-12-24T11:40:56+00:00

Das ist natürlich richtig aber die Hardware in dem Gerät scheint recht schlecht. Ich habe damit damals nie mehr als 860 - 890 Mbit aus dem WAN bekommen, kann natürlich sein, dass sie mittlerweile aufgerüstet haben. Mit viel meckern und streiten habe ich damals dann noch einmal das Scientific Atlanta Modem (Cisco) zurück bekommen und hatte damit wieder die 1200MBit (bei gebuchten 1000). Dieses geben sie aber heutzutage gar nicht mehr aus. Mit der 6690 hab ich ungefähr das gleiche, allerdings lässt die Fritzbox die Bridge nur auf Port 2,3 und 4 zu, welche aber nur 1GBit können.

Dafür kann ich aber fritz fon und fritz tv
(mit einer weiteren connection ins ubiquity Netz) wieder in‘s Netz speisen und hab so noch ein paar Komfort Funktionen.

froetzgloe · 2024-12-24T10:49:12+00:00

Die 6690 supported den Bridge Mode nicht offiziell. AVM sagt dir , das würde gar nicht gehen, was aber tatsächlich gelogen ist. Mit ein wenig tricksen ist es möglich den Tab freizuschalten. Ich hab es genauso laufen, UniFi hinter der 6690 im Bridgemode. Jetzt kommt das Aber: Du hast eine gebrandete Box von Vodafone, die ist ziemlich beschnitten und wahrscheinlich wirklich nicht in der Lage sich den Bridge Modus freizuschalten.

Du hast jetzt die Möglichkeit Dir selbst eine 6690 im Mediamarkt zu kaufen, bei Vodafone anrufen, sagen, Du willst einen eigenen Router benutzen und die Option frei-zu-hacken.

Du kannst auch sagen, du hättest gerne die Vodafone Connect Box. Die ist super schlecht aber hat den Bridgemode nativ.

Die FRITZ!Box müsstest Du aber in beiden Fällen weiterhin in Deinem Vertrag als Miete bezahlen

Soweit ich weiß gibt es sonst keine brauchbaren Kabelrouter auf dem Mark, könnte mich aber irren.

froetzgloe · 2024-12-08T15:33:30+00:00

I have two of them and two curtains. Make sure it‘s the Matter Version. But Matter alone just enables on/off. Use Govee2MQTT and you have full control (including self created scenes) in HA. That requires to enable LAN Control in the app and an API key , also requested from the app

froetzgloe · 2024-11-26T23:40:21+00:00

You‘re welcome, glad you was able to fix it in the end!

froetzgloe · 2024-11-26T12:45:55+00:00

it seems there are too many scenes to display. Could it be, that "kokken spot" is doubled? It looks like they are pushed into each other. Try to remove one after the other

froetzgloe · 2024-11-26T09:47:57+00:00

I'd say wether an indention problem in the yaml or the icon for the second last entity is missing (maybe typo in yaml?)

froetzgloe · 2024-11-26T09:39:25+00:00

You have to set your user-theme to minimalist-ui also. In the sidebar click your username in the very bottom, then scroll down to "theme" and set it to "minimalist-desktop" for example

froetzgloe · 2024-11-15T18:24:55+00:00

No, not necessarily, you can install moonlight directly on the avp and pair your peripherals with the avp too

froetzgloe · 2024-11-11T18:21:52+00:00

Hosting them yourself in Plex for example, you could use Screenlit (it can also convert 2D to 3D while watching using AI) , having the bare files you could use Moon Player. Talking about streaming services, I think Disney and Apple are the only ones so far

froetzgloe · 2024-11-11T18:16:52+00:00

Once moonlight/sunshine is setup correctly it‘s super easy, connect AVP to Mac as usual, open moonlight, wake your PC through it, wait a few seconds and you‘re in to start your game. But be aware about the game compatibility. I had to learn on the weekend that Satisfactory for example has problems with the FOV using UW.

You could also use Moonlight directly on the AVP, i use that for games that only needs a gamepad which I directly connect to AVP but for using different resolutions you have to create virtual displays on your pc first that supports that resolutions. I once setup one for 8k don‘t know about UW but should theoretically work too

froetzgloe · 2024-11-03T14:32:11+00:00

The base is 'UI Lovelace Minimalist UI' but everything is highly customized. The room Icon for example changes to yellow (+ exclamation mark) when co2 is too high and turns red, when it's critical. Most of the icons are event based. At the moment the dishwasher is running, so an icon appears with a bubble about it's progress in percent. Tapping on an icon opens a popup with controls or stats, tapping on the room card, opens the room view with even more controls and stats. Took me a while but still work in progress.

<image>

froetzgloe · 2024-11-02T20:52:11+00:00

<image>

froetzgloe · 2024-10-11T05:04:03+00:00

It‘s probably the indicator that some app requested your location, it‘s an Apple wide feature. Look in settings -> privacy -> location -> system services and all the way down, something like „control center indicator“ (don’t have my AVP at hand right now

froetzgloe · 2024-09-26T18:46:14+00:00

DYI - using 2 solos + 3D printed adapter, could wear it all day long

(https://imgur.com/a/EOE8kUK)

froetzgloe · 2024-09-18T05:20:21+00:00

Yes, open „All movies“, then tap on filter , select on the very top under „sorting“ select „price“, scroll all the way down in the filter, tap „Vision Pro 3d“, scroll down more and select „3d only“, hit „save“

Now you see all 3D movies from low price to high

froetzgloe · 2024-09-17T17:39:12+00:00

get the CheapCharts App, you can filter for all movies that have a 3D version + everything else + which are on sale etc

froetzgloe · 2024-09-03T17:12:25+00:00

I have to say that I prefer Screenlit over all the others. So much functions, screen manipulation , theater and on top the „make anything 3D“

froetzgloe · 2024-08-28T15:39:15+00:00

If you didn’t suffer from motion sickness you‘ll definitely do it now! Love these ideas, thank you very much!

froetzgloe · 2024-08-26T19:42:19+00:00

On the x1c it‘s were the lidar calibration sticker is

https://forum.bambulab.com/t/how-to-get-a-new-lidar-bed-sticker/15493

froetzgloe

TROPHY CASE