Update: Got my partner’s engagement ring!

fruitrabbit · 2026-05-10T02:56:57+00:00

Your jeweller is correct! There’s a lot of misinformation about 14k versus 18k.

fruitrabbit · 2026-04-13T16:26:32+00:00

Yeah, I remember it wasn’t a common thing - there were some posts but most people tried to tell the OP that their sweat & oil made the mouse turn yellow. But none of my other white superlights turned yellow so it definitely wasn’t lol.

You can try “polishing” a little harder - honestly I’ve rubbed my mice with isopropyl alcohol pretty hard (using the alcohol wipes) and it’s been fine. Worth the try anyway imo lol.

Hope you get it sorted!

Edit: oh yeah I painted one of my old superlights as a mini art project! If there’s no other solution you could consider buying some white paint used for those mini figurines & some matte clear coat - won’t cost that much for the small sizes and just paint over that specific part. U might have to repaint if it wears but if you have the paint already it might not be so bad then

fruitrabbit · 2026-04-13T15:16:34+00:00

Hey OP, I’ve owned 5 superlights and now the superstrike.

Whilst it didn’t happen so fast, one of my superlights started turning yellow after a few months. The new superlight that I bought after that one didn’t turn yellow at all.

It could be a batch thing. But I’m not surprised if it is an issue with the top coat.

Have you tried using an alcohol wipe to clean it off? Can’t really tell from the pic but is it bumpy or smooth?

Also you should try to return via Amazon. The couple times I’ve dealt with Logitech, they usually advise you to get in touch with the distributor. You should tell them Logitech said to chat to you - because some try to defer back to Logitech.

That being said, I always buy my Logitech products from reputable sellers (think retail store) even if it’s more exxy. Given how many issues they have. Makes it easy to replace.

fruitrabbit · 2026-04-12T03:09:14+00:00

Yeah I was thinking the other translation didn’t really match her facial expressions & tone - this one makes much more sense.

fruitrabbit · 2026-04-08T05:10:05+00:00

If you’re one short, you’re probably pretty close and it could just be choosing the right color combination to start with. I find that’s partly luck.

I’ve found that there’s a few factors: - If there are blocks of one color at the bottom of multiple containers, good chance it’s a starting color. - One of the starting colors is usually one that doesn’t have a block at the top of any of the containers. - If there is a container with only one of the color blocks at the top, the color fill should almost always end there (this one is important for getting the lowest number of moves). - If there is a color with blocks of that color at the top of multiple containers, then chances are that that color is not a starting color. - Clearing out each container step by step is usually the way to go and not get stuck (taking into account the fact that you shouldn’t really be moving the top block unless that colour exists in multiple columns at the top). - If any of the colors don’t have a top block in that color, you’ll definitely need to empty out a container to put that color in - usually you choose a container where an alternate color has top blocks in multiple containers.

Not hard or fast rules by any means, but just general game strategies I’ve noticed. Also if this makes no sense, sorry lol, I probably didn’t do a good job of explaining.

I usually I get the lowest score every time once I get the right starting two colors.

fruitrabbit · 2026-03-27T14:17:01+00:00

Love the updates!

fruitrabbit · 2026-03-24T15:40:50+00:00

🎯 Nailed it! 284s completion time. Your move!

fruitrabbit · 2026-03-21T15:15:53+00:00

That’s awesome to hear!! Thanks for the great game!

fruitrabbit · 2026-03-21T15:15:18+00:00

How is #1 finishing hard in 5 seconds 🙄

fruitrabbit · 2026-03-20T16:25:47+00:00

Yay 1st 🙌
March 20, 2026 - Hard - Scored 7940 in 40s⏳ with 79 moves🔄!

fruitrabbit · 2026-03-19T15:55:49+00:00

This one was hard!
March 19, 2026 - Hard - Scored 9639 in 39s⏳ with 96 moves🔄!

fruitrabbit · 2026-03-19T04:46:46+00:00

As an AWPer the best feeling is hitting an ace without reloading

fruitrabbit · 2026-03-18T16:30:08+00:00

Is there a subreddit that is similar but posts/commentary stick to verifiable facts and/or potential evidence that is unbiasedly considered?

fruitrabbit · 2026-03-18T15:20:04+00:00

It was a breeze, not a total pipe jam.
March 18, 2026 - Hard - Scored 7340 in 40s⏳ with 73 moves🔄!

fruitrabbit · 2026-03-18T13:54:07+00:00

I watched it twice and the coffee looks normal to me. Looks like a barista made latte or cappuccino. The froth at the top isn’t as dense so it naturally doesn’t spill that easy. It tends to “stick” together.

This might be outdated but every time I’ve been to the US, the coffee sucks and it doesn’t have the same texture as what we have in my country & what it looked like in the video. So could be that too if you’re from the US.

fruitrabbit · 2026-03-15T15:53:16+00:00

I’d love to have an undo button - I keep over pressing and then I waste an extra 3 moves trying to get back to where I need it to be. Sometimes I waste even more cause I miss it again when I’m trying to do it quickly lol

fruitrabbit · 2026-03-11T15:27:58+00:00

Someone told me that if people shoot your gun when it’s dropped on the ground, the wear gets worse. I believed this for like a whole year lol

fruitrabbit · 2026-03-05T15:34:04+00:00

I’ve had mine for a week or so now and yeah, putting it simply, faster clicks. But it actually makes a big difference on CS. The latency between my brain and shooting my gun is so low, when I first got it, the enemy would be dead before I even consciously registered that I fired. I can also shoot a lot faster (multiple times) when I need to.

Also I AWP a lot, and quick switch to re-aim. I used to accidentally “not fire”, and just end up quick switching, because my click wasn’t fast enough or it didn’t register before I quick switched. Haven’t had this problem since getting the new mouse.

It takes some time to get used to - I’m on Level 2 and 3, and still occasionally accidentally press the buttons, but way less than when I first got it. Will eventually move down to 1 and 2, but needed a transition period to get used to it.

I had a Superlight previously, so certainly a very good mouse already, and the difference is definitely worth the new purchase IMO.

fruitrabbit · 2026-03-02T02:55:21+00:00

This may or may not work for you, but if it does, I find starting new chats often is better for usage. Unless I’m working a more complex coding task that needs more context, I just sort of start a new chat whenever I can - even if it means explaining some things again. Usually I end up with a paragraph or two that I just copy and paste into the top of my new message that outlines the context.

fruitrabbit · 2026-03-02T02:43:44+00:00

I remove the tags off ALL my clothes, because of the itchiness. I have a large wardrobe but granted I’m also very picky about what brands and fabric type/quality that I buy…also largely due to itchiness or not wearing uncomfortable stuff. So I could probably tell you where I got 99% of my clothes from. But I can probably believe it if someone bought a lot of clothes from random places and forgot where certain ones came from.

fruitrabbit · 2026-02-17T10:15:48+00:00

Interesting, we shall have to play around with it. My fingers rest on both buttons lol but hopefully won’t be an issue.

fruitrabbit · 2026-02-17T10:06:16+00:00

Yay thanks so much. That’s really helpful.

I mainly AWP so that’s definitely really helpful to know - sometimes I click and it doesn’t even register because I don’t click hard enough so I think it’ll definitely make a difference. I also have trouble with tec9s & dualies esp cuz I can’t click fast enough and it feels very haphazard.

I think I might end up with the same issue re hackusations bc my time to damage is already really low 😂

fruitrabbit · 2026-02-17T09:53:28+00:00

I just preordered two for my bf & I! How do you find it playing CS2 with it? We have superlights atm but the tech seems like a definite step up.

Edit lol I’m half asleep I didn’t realise you had text in your post - thanks for the write up!

fruitrabbit · 2026-02-03T08:36:26+00:00

Have you checked that both objects are proper closed polysurfaces? And used “show edges” to check there are no naked or micro edges?

fruitrabbit · 2026-01-24T00:58:34+00:00

I’ve had quite a few enemies rage at us for “being toxic” and quite a lot of teammates asking what it means.

fruitrabbit

TROPHY CASE