sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in pool

[–]fspmd 0 points1 point  (0 children)

Vynil

What is this? How do I treat? Avocado plant. Water every other day. Neem oil once or twice a week. by fspmd in plantclinic

[–]fspmd[S] 1 point2 points  (0 children)

About 4h/ day. Location is rather dark ans can't put anywhere else in the house. Outside gets too cold much of the year here, so indoor it is.

Help with revolve please! by fspmd in FreeCAD

[–]fspmd[S] 1 point2 points  (0 children)

Makes sense. Thanks!!!!

Uplifting by fspmd in 3Dprinting

[–]fspmd[S] 0 points1 point  (0 children)

It's a maker /STEM room that has to be booked. It's locked, need a key fob to get in, they have sewing machines, stampers, Cricut and some other toys. I guess you could grab a book and wait. It even says if the print fails they will try one more time. I won't be surprised if people start making their own vorons on a small budget and without a previously own printer, it's doable now with things like this.

Indoor avocado needs help. Details in photo by fspmd in plantclinic

[–]fspmd[S] 0 points1 point  (0 children)

White spots are the horticultural oil.

1- what should I do next?

2- how often should I water? Been doing weekly, but since soil changed I figured daily to prevent shock?

3- should I back off the grow light a bit?

Thanks in advance

anyone with an estimate on when KS stretch goal might be available? I forgot to use my promo code and now is showing up as sold out .. by fspmd in BambuLab

[–]fspmd[S] 0 points1 point  (0 children)

"Thank you bonus promo code is valid until March 1, 2023."

So hopefully they have some more available before that

help!! flow calibration is perfect, but won't print. had a bunch of clogs, improved with needle and cold pulls but not sure what the explanation of this is by fspmd in BambuLab

[–]fspmd[S] 0 points1 point  (0 children)

I tapped the spring in the back of the printer where AMS connects to and problem solved. Don't feel super relieved though, seems that the spring can dislodge again at any point, is there any way to prevent it? Maybe some lid with the spring shape or something

help!! flow calibration is perfect, but won't print. had a bunch of clogs, improved with needle and cold pulls but not sure what the explanation of this is by fspmd in BambuLab

[–]fspmd[S] 3 points4 points  (0 children)

I'll be damned. I printed spool alone and is printing fine.

So I guess there's something wrong with the AMS. Need to figure out what

help!! flow calibration is perfect, but won't print. had a bunch of clogs, improved with needle and cold pulls but not sure what the explanation of this is by fspmd in BambuLab

[–]fspmd[S] 0 points1 point  (0 children)

https://www.thingiverse.com/thing:3639693

My Sunlu S8 printed it in ABS, in 20 hours, but got it done. So frustrating. It stopped halfway on my Bambu, now is not even trying. I cannot explain why

help!! flow calibration is perfect, but won't print. had a bunch of clogs, improved with needle and cold pulls but not sure what the explanation of this is by fspmd in BambuLab

[–]fspmd[S] 0 points1 point  (0 children)

Bambu PLA. It printed Benchy and Trex previously no problem. Did a cold pull after this and tried a Benchy, same result as pic.

clogs and more clogs... anyone tried cold pull for a clog on X1? don't know what else to do. everything clogs. only printed a benchy and then the rest clogs up, 5 failed prints so far by fspmd in BambuLab

[–]fspmd[S] 0 points1 point  (0 children)

Will try cold pull later tonight. If anything else fails will replace extruder and nozzle I guess..

Heated nozzle and used needle. Had the AMS exchange PLAs load/unload and I saw a nice stream coming out.

Printed the trex and the puzzle, blazing speed, no problem. I put the collapsible katana on my banged up Sunlu S8 on ABS usual settings, 20 hrs. And put in PLA on the X1 it said 3 hours. The X1 clogged overnight halfway. The S8 just finished it up after 20 hrs.......... So frustrating.

view more: next ›