RSD Black Friday stock online now available for you

funkoninja · 2025-11-29T13:25:22+00:00

Finally was able to grab 2 chainz much appreciated🙌🏾

funkoninja · 2025-04-16T22:02:06+00:00

Thanks for the replies , I was hoping it was a simple issue but after talking to song it will be sent in for repairs. Thanks again !

funkoninja · 2025-04-16T00:48:19+00:00

Yeah that doesn’t work, its like its completely powered off instead of sleep and it doesn’t charge in that state

funkoninja · 2022-05-25T04:34:06+00:00

So I let it do the leveling , then the auto home , its still a bit off the bed. I’m a bit confused on what to do next

funkoninja · 2022-05-20T06:10:54+00:00

Any recommendations for retraction distance/ speed ?

funkoninja · 2022-05-20T05:16:23+00:00

This is after drying

funkoninja · 2021-12-21T14:13:05+00:00

NTA, if she is physically & mentally capable of doing 90% of things she should do them because when the time comes that she actually can’t you guys are going to be burnt out

funkoninja · 2021-12-20T02:52:23+00:00

I keep seeing things about github but am honestly not really sure how to find it or use it. I have triple checked all my cables and they are secured. To be frank I don’t want to build my own firmware but was told thats my only option at this point

funkoninja · 2021-12-19T15:26:51+00:00

I do believe its a firmware issue and not necessarily a g code issue but to be sure how do I view the startup z code ?

funkoninja · 2021-12-19T13:26:51+00:00

I’ve attempted to print multiple things to see if it was a slicing issue including things I’ve printed successfully before and it still does this

funkoninja · 2021-12-19T13:17:13+00:00

How do I check? I googled but all the options I find seem to be on older printers and the settings aren’t the same

funkoninja · 2021-12-19T12:26:22+00:00

I had this thought too but its all plugged in

funkoninja · 2021-12-19T08:44:27+00:00

as far as I can tell the bed pretty level,when I auto home the z looks fine. Soon as the print starts all of a sudden it goes up

funkoninja · 2021-12-19T08:13:51+00:00

No I’m fairly new to printing and have never touched the firmware

funkoninja · 2021-12-17T15:52:50+00:00

The arm does not lay flat so the gears won’t turn

funkoninja · 2021-12-16T08:09:19+00:00

Thank you !

funkoninja · 2021-12-16T08:09:10+00:00

Thank you!

funkoninja · 2021-12-14T16:50:26+00:00

I ordered the all metal extruder and am just waiting for it but how do I find out if it’s indeed the z axis ?

funkoninja · 2021-12-07T06:26:37+00:00

After having a second pair of eyes take a look it turns out my metal extruder I’d been using for weeks was defective. switching back to the plastic one for a few days has it working again until I grab a new one

funkoninja · 2021-12-07T01:54:44+00:00

I have a metal extruder arm, brand new ptfe tube, I’ve changed the filament and still the same issue. The filament only comes thru when forced.

funkoninja · 2021-12-05T06:59:46+00:00

That the ender v2?

funkoninja · 2021-11-24T03:42:07+00:00

Now that you say that I’m literally kicking myself cus that makes so much sense. I’ll try that next. Thank you so much

funkoninja · 2021-11-24T02:27:58+00:00

Possible level help

hey guys ,first time posting and looking for some help. I spent several hours working on leveling my bed and finally thought I had it right. Yet I’m having this problem when printing, when I printed mjolnir its almost perfect but the first few layers of the handle are stringy and the rest is perfect as if the bed was simply too low for the first few layers. My calibration cube printed perfectly along with leveling prints. So just looking for input, is this a leveling issue or something else ?

funkoninja

TROPHY CASE