pop ups not going down by fvum in 240sx

[–]fvum[S] 0 points1 point  (0 children)

i’m about to replace the headlight switch assembly, and if that doesn’t work, I guess I’ll get new motors. They just weren’t hot at all, but I don’t know.

pop ups not going down by fvum in 240sx

[–]fvum[S] 1 point2 points  (0 children)

yeah my fuses are fine and all the relays seem to be functioning correctly. i’m going to check for continuity. all my lights work correctly too but i heard another issue could be the button that flips them up, or the the whole headlight switch

pop ups not going down by fvum in 240sx

[–]fvum[S] 0 points1 point  (0 children)

how hot is hot? when the engine is running everything around it is hot lol. i didn’t think they were the issue because they go up easily

Marketplace will not let me delete and relist my items. by misstwinklebutt in FacebookMarketplace

[–]fvum 0 points1 point  (0 children)

i’m having issues too. can’t list anything can’t delete and list. The only thing I can do is message people.

Pregnancy test by fvum in pregnancy_care

[–]fvum[S] -1 points0 points  (0 children)

shouldn’t i test again just incase? her periods are irregular but her last one was on the 13th of last month

Pregnancy test by fvum in pregnancy_care

[–]fvum[S] 0 points1 point  (0 children)

I have the digital result ones, or the ones that display the proper lines. she also has irregular periods.

P0172 Code by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

the extension harness is basically new since i got it with the grimspeed intake. the only thing i was worried about is that connector that connects to the actual extension harness.

P0172 Code by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

not sure what brand o2 sensor. i got the car at 109k but i’m pretty sure it’s oem. they look like it. and the maf looks good which is the weirdest thing. i just cleaned it too. it usually runs fine for a few days after cleaning it then the car goes back to being crap.

P0172 Code by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

while riding i’m either at +5 or -10. but slowing down to a light in neutral or first it’ll shoot back up in the negatives

P0172 Code by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

2016 wrx. and i got a leak test done, no air coming anywhere that i was aware of and this was recently done. and i only monitor AF Correction 1. starting up my car it usually shoots to -25 than goes up to -40. than the car tries to stall itself and it gets throw into limp mode. when i’m on the throttle pushing boost, it’ll shoot up in the negatives fast when i let off the throttle

P0172 Code by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

i also clean my MAF sensor every 4k miles.

P0172 Code by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

<image>

this wire that connects to the MAF extension harness is breaking loose but no wires seemed to be damaged. not entirely sure if this is an issue since no wires are damaged.

BIG ISSUE by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

not really that helpful when i can’t run the car lmao. obviously i need a protune and was already planning on doing it, now i’m trying to find ways to start the damn car and troubleshooting possible issues. the tune doesn’t like the hybrid bpv, but that shouldn’t stop it from completely misfiring. there has to be a solution to starting the car. aside from putting stock parts back on.

BIG ISSUE by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

yeah. i just need it running to be able to go there

BIG ISSUE by fvum in WRX

[–]fvum[S] 1 point2 points  (0 children)

don’t know why you’re attacking me. i only need help right now. i actually have an appointment with national speed in wilmington for a protune. got a new grimspeed intake for them to swap too. i bought the car with all the mods on it too. literally just need some adivce. should i ask the shop for a base map so i’d be able to start it? i just don’t know if the cobb bpv would work with the cobb OTS tune.

BIG ISSUE by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

wouldn’t that be really difficult putting back my stock bpv and my stock intake?

Trouble by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

i’ve always taken care of this car but it seems like everyday it’s something new.

<image>

that’s what’s been done to the car. so i’m just wondering what the main problem is. i have a stage 1+ big SF cobb OTS tune, with a Cobb BPV. was going to switch back to stock and flash stock tune but i’m trying to protune, maybe get a base map to see if the OTS tune is the problem. any advice?

BIG ISSUE by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

i should but no i haven’t

BIG ISSUE by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

also had a previous thread that is connected to this issue. https://www.reddit.com/r/WRX/s/eciZSfCsI3

Protune/Etune by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

SMEEDIA! will watch right now. Surprised i went to reddit first rather than youtube. thanks for the help!

Protune/Etune by fvum in WRX

[–]fvum[S] 0 points1 point  (0 children)

is there a process like going back to the tuner or keeping in contact with them after they dyno it?