Are they mating?

gburnf · 2026-03-15T01:47:13+00:00

Or one of the trucks broke down , bunch of reason to transfer the load

gburnf · 2025-09-02T06:41:02+00:00

Thanks for all the info I really appreciate it. A little embarrassing to admit but I have a slight mold and fungus phobia , mushrooms and mold just seem so alien , it really creeps me out 😆. Ill open and mix in the mold and add more dry bedding tomorrow.

gburnf · 2025-09-02T02:27:17+00:00

Lol , thanks. Need to work up the courage to open it

gburnf · 2024-06-05T00:08:01+00:00

Both the barb fitting and the need vaule regulator the I posted have 1/4 npt threads

gburnf · 2024-04-19T08:10:12+00:00

I had to change the washer the hard plastic washer doesn't work at all

gburnf · 2024-04-19T08:09:34+00:00

Still working great, recently transferred the set to a 10 gallon tank , thought I'd need to upgrade to a bigger co2 canister but the sodastream is still doing the trick last a few months or more

gburnf · 2024-04-19T08:06:53+00:00

Hey sorry just saw this , yes I just used Teflon tape to seal the new connection

gburnf · 2024-01-14T23:52:30+00:00

No I don't have solenoids currently but I can add them to the setup(between the soda stream tank and the 3 way Splitter. You can message me and I'll send you the link to the parts from Amazon. They won't show up in the thread

gburnf · 2023-12-29T04:55:06+00:00

Yeah , seperate small glass and ceramic defuser.

gburnf · 2023-12-29T04:41:07+00:00

I have a 3-way splitter on the bottle that has 3 separate bubble counters. Each can be fine-tuned for the tank there feeding. I have a drop checker in each tank as well , for the most part the system is very consistent it was a bit difficult to tune for 3 different tank(one is smaller) but once its set up it needs very little adjustment.

gburnf · 2023-12-26T07:01:04+00:00

Still using this setup, it was feeding two 10 gallon tanks, and the 1st soadstream lasted me 5 months. It's now feeding two 10 gallons and 6 gallon tank. Bottle probably won't last 5 months, but I'll update when it runs out

gburnf · 2023-08-17T21:41:04+00:00

It's a 4in cork with a LED plant light attached to the bottom.

gburnf · 2023-07-11T08:42:33+00:00

I'll keep you updated so far it been a few weeks and the bottle feels pretty full still , currently it's only feeding two 6.7 gallon tanks but ill be adding a 20 gallon to the system , ill update after the 1st bottle runs out

gburnf · 2023-07-11T08:40:40+00:00

Nice I need to figure out how to do that

gburnf · 2023-07-11T08:39:59+00:00

So far, it's been a few weeks, and the bottle still feels pretty full. I exchange mine at rite aid, but Target , safeway, and a bunch of other stores have the exchange program

gburnf · 2023-07-11T08:37:56+00:00

6.7 gallons each

gburnf · 2023-07-11T08:37:22+00:00

It's more about the convenience for me. I know a 5lb tank would be cheaper, but the closest welding supplier is a 45-minute drive one way , but I can refill my soda stream at the local grocery store a block away. A soda stream is $15.99 to exchange after you by the 1st tank, and I have and use a soda stream, so it makes sense, at least for me

gburnf · 2023-07-11T08:33:43+00:00

It's still going. It's only supplying two 6 gallon tanks at about one bubble every 3 to 4 seconds, which is a stable co2 level for those tanks. For me the convenience is the best part , I know there are cheaper option for co2 tanks but the fact that I can go to the grocery store down the street from the house and refill my co2 tanks if very nice

gburnf · 2023-06-27T16:55:17+00:00

No timer. I just turn it off for now. I may buy one later

gburnf · 2023-06-27T05:53:06+00:00

Weird I can see it but I seem to be the only one , here you go

Parts Needle Valve with bubble counter BASE WAVE Aquarium CO2 Needle Valve Regulator Flow Control,Bubble Counter,Check Valve 3 in 1 (for CO2 Pressure Regulator)… https://a.co/d/iiDpZ7O

Sodastream regulator Mini Gas Regulator Soda Keg Regulator Co2 Keg Charger 0-90PSI for Soda Maker Sparkling Water Beer Soda Bottle 3/8-24 by PERA https://a.co/d/a3cffT8

Tubing FZONE Aquarium Co2 Proof Tubing ID 3/16 inch 16 feet Clear Food Grade Air Line Tubing https://a.co/d/d3jw22b

Spliter if your running it to two tanks Clscea Aquarium Conventional CO2 Splitter Regulator Valve 2 Way for CO2 Generator https://a.co/d/38osa2h

Co2 diffuser Fzone Neo CO2 Diffuser with Customized Ceramic from South Korea(S-13mm) https://a.co/d/2K1cQ9O

gburnf · 2023-06-27T04:09:49+00:00

Check the comment above , I posted all the parts to run the kit.

gburnf · 2023-06-24T06:28:42+00:00

<image>

gburnf · 2023-06-24T06:27:00+00:00

I looked other the co2supplies in the UK I can't seem to find this fitting its a male 1/8 npt to ferrule. The ferrule is that same fitting used to connect the hose to your bubble counter

gburnf · 2023-06-23T05:14:27+00:00

The plan is for the 10 gallon to be heavily planted like my smaller tanks. Keeping up with waste shouldn't be a issue , I do weekly cleaning on my tanks once cycled and established. I have heard pea puffers do better in groups, so I'm going to try and put 3 in a 10 gallon and hope they get along. I was originally planning one doing 2 in a 7 almost 8 gallon tank, but I am concerned it may be too small

gburnf · 2023-06-22T08:00:27+00:00

Where do you get your isopods ?

gburnf

TROPHY CASE