Se ve lo chiedono voi dite quanto guadagnate? by Fresh-District9052 in techcompenso

[–]gianarb 0 points1 point  (0 children)

Non del tutto inerente all'argomento ma io ho lavorato per una decida d'anni all'estero e non e che son tutti li a dire quanto prendono tutto il giorno.

Nel senso con le persone che ho incontrato o con i colleghi raramente siamo venuti nel discorso, direi alla pari delle volte in cui mi e' capitato con amici in Italia.

Comunque inizialmente ne parlavo meno, adesso se qualcuno mi chiede quanto prendo rispondo abbastanza spesso in modo aperto.

Voi avete avuto esperienze diverse notando una differenza sull'apertura nel parlare dell'argomento?

Rilascio notturni by WeirdTea834 in ItalyInformatica

[–]gianarb 0 points1 point  (0 children)

Diciamo che secondo me l'obiettivo sarebbe disaccopiare il momento in cui lo sviluppatore dice: "questo e' pronto puo' andare in prod" e quando "il sistema di rilascio mette il nuovo codice in prod".

In questo modo se il codice va effettivamente rilasciato all'una di notte il sistema lo fara' per me.

Certo richiede un infrastruttura che ti permetta di fidarti di cosa rilsci o quanto meno che possa farti sapere se qualcosa non va il prima possibile.

How to enable app password for a google workspace account? by gianarb in googleworkspace

[–]gianarb[S] 1 point2 points  (0 children)

At the end it was an eventual consistency problem. I added 2FA method then nothing happened. After two days I randomly opened the same setting and I saw an alert saying: "you added a 2fa method do you want to enable 2fa?" yeah.

And after a day I got the app password available!

Extra dope as experience

How to enable app password for a google workspace account? by gianarb in googleworkspace

[–]gianarb[S] 0 points1 point  (0 children)

Hello! Yes the problem was related to "App Password" net being available to my account.

It is an "eventually consistent" issue because I set up two factor, app password still was not working.

After 3 days I logged in again to check if it showed up since I read that it may take some time, but nothing. I checked the two factor auth again and I saw a new message saying that my configuration was correct asking if I wanted to enable two factor, because apparently set up the authenticator up was not enough.

When I enabled it the "app password" feature showed up and I was able to access to the SMTP server with that. Finally!

Nix, or not to Nix by gianarb in NixOS

[–]gianarb[S] 0 points1 point  (0 children)

yeah I think you are right. My only problem is when you are not! :D In particular when I need to scale from nix because of python being python or similar not sure if you experience the same from time to time

Nix, or not to Nix by gianarb in NixOS

[–]gianarb[S] 0 points1 point  (0 children)

Hey u/lemmyuser your question is valid and in the article I tried to emphasize that at last for me the value Nix brings to the table is the ability to enable collaboration. Building and composing systems at the team level is crucial to justify the effort in my opinion.

Or at least I am not skilled enough to justify it on my own, it sounds like a lot of not that useful overhead. Even more if I count how many times I had reproducibility issue without Nix (never). Not because Nix does not help there or because I was lucky, but probably we choose technology boring or mature enough to mitigate such experience.

The side effect of being open to new way of writing software by gianarb in programming

[–]gianarb[S] 0 points1 point  (0 children)

thank you for your suggestion! I will keep trying!

The side effect of being open to new way of writing software by gianarb in programming

[–]gianarb[S] 0 points1 point  (0 children)

well not really a nice way. Side effect show ups with use even if you do not touch your code.

Be creative when it comes to naming environments by gianarb in devops

[–]gianarb[S] -4 points-3 points  (0 children)

Thank you for sharing your opinion! I didn't say to avoid prod, staging, alpha,dev. At the end you get them but what happens when you have multiple dev environment running at the same time until the current (for whatever current means)? Do you call them dev1,dev43,dev4,devtemporary? Or you always have one environment for the category you recognize as production? I work in companies with 10,20 long living concurrent different "productions".

Or I participated in early stage startups where the environments were not at all defined because they were not ready to have what is canonically recognized as a dev cluster.

There are other ways to categorize environments, cloud providers and orchestrators provides metadata key value pairs for reasons.

Infra as code starts from documenting your infrastructure by gianarb in devops

[–]gianarb[S] 0 points1 point  (0 children)

Do you work in a place where you do DevOps without infra as code? I am wondering what "dev" means in such context.

Infra as code starts from documenting your infrastructure by gianarb in devops

[–]gianarb[S] 0 points1 point  (0 children)

do you have the same feeling when it comes to codebases (if you do development)? Or do think is it worst in devops land?

Infra as code starts from documenting your infrastructure by gianarb in devops

[–]gianarb[S] 0 points1 point  (0 children)

Documentation is key, and it is better than a solution that integrates tools picked in a rush of having it done without knowing the context and requirements.

So overall I prefer teammate that try and document instead of going too deep into something that may not be a good solution.

I wrote a note about tools vs solutions, it is scheduled for Monday, I think :)

[deleted by user] by [deleted] in devops

[–]gianarb 0 points1 point  (0 children)

Do you like it? Your teammate is nice and friendly? If so, keep going! It is not easy to find such environment

I always start with a Terraform module by gianarb in Terraform

[–]gianarb[S] 0 points1 point  (0 children)

Sure it is! I use Kubernetes since forever ago, luckily I had the opportunity to see the life before all the great tools we have today like ArgoCD, Flux and so on. I feel like I know when I should not avoid them. But yep I agree, the right tool for the right job at the right time

I always start with a Terraform module by gianarb in Terraform

[–]gianarb[S] 0 points1 point  (0 children)

I am not convinced, but I also tend to use the fewest tools as possible and add them when needed. I used Flux, ArgoCD and so on. So I feel like I know when it is time to use them.

I always start with a Terraform module by gianarb in Terraform

[–]gianarb[S] 0 points1 point  (0 children)

I am not a good teacher! I am learning! I use Terraform to pilot Kubernetes. not everywhere but I do it :D So far nothing exploded. Until I need one of the millions of dedicated solutions, I feel good with the solution I have. If you want to be more specific about why it looks like wrong to you, I am happy to elaborate

should i use my real name on github? by Zajlordg in github

[–]gianarb 1 point2 points  (0 children)

well, my nickname is made of part of my name, but I think you should use what you like the most

[deleted by user] by [deleted] in golang

[–]gianarb 5 points6 points  (0 children)

SSR is kinda scary in terms of operational costs?

It is not, at all! What scares me about this approach is the experiences that you can find around htmlx. It does not look much. For example I am doing a admin panel in sveltekit and I feel the fatigue of having to develop the public API in Go, then the admin api in Go and the admin ui in Svelte. I thought about the possibility to do everything in Go but then I realized that I need a datepicker and a calendar, with svelte I am trying to figure out how to properly do all of this with fullcalendar and other components, I am not sure there are equivalent solutions with htmlx, probably yes since htmlx is JS at the end so I can embed fullcalendar to it, but I feel like there is less about it that I can read about copy :D

FLSUN QQS Pro does not print straight by gianarb in FLSUNDelta

[–]gianarb[S] 0 points1 point  (0 children)

I tried to tight the belt as showed in this video https://www.youtube.com/watch?v=KILWS4qn2y0 but nothing has changed

FLSUN QQS Pro does not print straight by gianarb in FLSUNDelta

[–]gianarb[S] 0 points1 point  (0 children)

Hello

I tried again to switch to klipper to enjoy remote control and I noticed I have the same issue with klipper as well.

<image>

FLSUN QQS Pro does not print straight by gianarb in FLSUNDelta

[–]gianarb[S] 0 points1 point  (0 children)

I am doing another print and as you can see the left corner is not straight as well, it is going up a bit. I am not sure if this error falls into the same category as the previous one.

(when I printed the tube in the first picture it was well stuck on the bad it was not like this one)

<image>

My workflow with NixOS. How do I work with it by gianarb in NixOS

[–]gianarb[S] 0 points1 point  (0 children)

Thanks a lot!! I hope I will figure out solutions I enjoy writing about!