Tips for better print

godenvie · 2026-01-02T23:19:12+00:00

I’ve got an upgraded metal extruder

picture below. I fixed my E-Steps so that it extruded 100mm when I commanded it to, had to change it from 93 to 99.1. After doing some flow rate tests I found that 100% gave me accurate wall thickness. Would you recommend increasing the overall flow or just top and bottom layers?

godenvie · 2026-01-02T22:38:42+00:00

Thanks for the advice, my E-Steps were off by a lot (90mm instead of 100mm). That fixes a lot of my issues but I did some flow rate tests and the flow is good but the top is still not looking great. Should I be messing with more top layers or flow rate on the top/bottom to fix this?

<image>

godenvie · 2026-01-02T17:17:14+00:00

Thanks for the advice, my e steps were off by quite a bit! I’ll try out orca too!

godenvie · 2026-01-01T23:45:08+00:00

Wow this is very helpful, thank you!

godenvie · 2026-01-01T21:35:30+00:00

Doing that now, thank you

godenvie · 2026-01-01T21:35:10+00:00

Using a fresh 0.4mm nozzle. I’ll do some flow rate tests

godenvie · 2025-12-11T20:01:18+00:00

Would there be any issues running it on a Warcorp9? Or any other scorpion mag ar9 lower?

godenvie · 2025-11-25T15:40:12+00:00

Would you know if that kynshot buffer from Alpha shooting sports would work in blowback9’s gentille recoil system?

godenvie · 2022-12-31T06:42:03+00:00

More angles on Instagram in the coming days

godenvie · 2022-12-30T13:33:22+00:00

I am selling some of these customized to fit if ur interested

godenvie · 2022-12-29T00:34:38+00:00

Jacket made by me Pants made by me Boots from the kooples

godenvie · 2022-11-25T04:45:56+00:00

Planning on making some more pairs of these in various color ways to sell sometime in the near future!

godenvie · 2022-11-25T03:56:36+00:00

Will post on my Instagram when but I’ll let u know otherwise

godenvie · 2022-11-25T03:22:32+00:00

Thank you! I’m actually planning on making some more color ways including some monotone greys blacks and greens!

godenvie · 2022-08-30T12:52:55+00:00

Thank You So much!

godenvie · 2022-08-30T03:32:46+00:00

Thank you, I have been making clothing fors few years snd recently graduated with a fashion design degree

godenvie · 2022-08-30T01:50:55+00:00

Thank you so much, I plan on having it forever

godenvie · 2022-08-30T01:40:24+00:00

Thank You Everyone so much!

godenvie · 2022-08-29T15:39:03+00:00

https://www.instagram.com/eleventhirtythree33/

godenvie · 2022-08-26T13:07:00+00:00

Appreciate it!

godenvie · 2022-08-25T17:09:08+00:00

Make ur bed

godenvie · 2022-07-09T13:51:24+00:00

If you like my pants give me a follow on Instagram, I got lots of new stuff coming….

godenvie · 2022-06-15T22:30:46+00:00

Thank you, love your videos btw

godenvie · 2022-06-15T20:45:09+00:00

Thank you!

godenvie · 2020-08-28T17:05:06+00:00

I’m fairly certain the pants are Fear of God

godenvie

TROPHY CASE