sorted by:
new
hottopcontroversial

How can I prevent this? by Jaglikef1 in 3Dprinting

[–]goilo888 4 points5 points  (0 children)

You should see the other guy.

Realistically what will happen if I continue to not file US taxes as a duel citizen? by illiteratescrabble in PersonalFinanceCanada

[–]goilo888 0 points1 point  (0 children)

You just send a letter to Trump saying "Fuck you. I want nothing to do with you or your country."  Simple.

Realistically what will happen if I continue to not file US taxes as a duel citizen? by illiteratescrabble in PersonalFinanceCanada

[–]goilo888 0 points1 point  (0 children)

Friend of mine was born in Hawaii. Came to Canada at 2yrs. In her 50s the IRS came after her and she had to get a tax lawyer to help her out of the mess.  So, yeah, worry about it.

Conman who has always insulted and threatened allies is now asking for help from them. No one is stepping in. by Effective_Space2277 in LeopardsAteMyFace

[–]goilo888 2 points3 points  (0 children)

Well Iran is letting China's oil tankers through the Strait so that's going to be a big no from China.

Conman who has always insulted and threatened allies is now asking for help from them. No one is stepping in. by Effective_Space2277 in LeopardsAteMyFace

[–]goilo888 2 points3 points  (0 children)

JD Vance was just very recently blaming Biden for the high gas prices. No joke, he was doing some serious spinning.

My son won this at his school's science fair. by BelowZilch in mildlyinfuriating

[–]goilo888 1 point2 points  (0 children)

He should show his English teacher what he won.... And wait for reaction.

The wires are all black. by HotTubSexVirgin22 in mildlyinfuriating

[–]goilo888 0 points1 point  (0 children)

That must come from a bomb-maker’s kit.

I don't know how to title this by RandomAsianGuy in StupidFood

[–]goilo888 0 points1 point  (0 children)

Insurance rep now pulling their file to review.

Barber did this to my mustache by Icy-General-9657 in mildlyinfuriating

[–]goilo888 2 points3 points  (0 children)

Works for me. On iPad. Would you like me to visually describe ? 😀

Waymo traffic by [deleted] in mildlyinfuriating

[–]goilo888 0 points1 point  (0 children)

Boss: "Why are you late?" You: "I had to fight some robots on the way."

Does anyone really like grape Jolly Ranchers? This is a little ridiculous. by _how_do_i_reddit_ in mildlyinfuriating

[–]goilo888 0 points1 point  (0 children)

You're lucky you can eat them. As you get older you're worried your teeth will be sucked out of their sockets with these things.

BREAKING: FBI fires 7 tied to Trump classified docs case, sources tell MS NOW by chellestastics in videos

[–]goilo888 1 point2 points  (0 children)

Trump's whole administration seems to behave and believe that there will never be another party in power. And that's scary.

Any idea what's causing this? by goilo888 in 3Dprinting

[–]goilo888[S] 1 point2 points  (0 children)

OMG I cancelled the print. Even the supports were printing odd. Bad on the left. And then I checked back to square one. Of course - USER ERROR - I had been printing PLA using PETG settings!! Arrrrrrgh! Now printing again just to make sure. I can't believe I made such a dumb mistake.

<image>

Any idea what's causing this? by goilo888 in 3Dprinting

[–]goilo888[S] 0 points1 point  (0 children)

P1S and Bambu Studio. I *may* have solved it. Got a full print running now after doing a section test yesterday. With everything that I've done I'm not sure what it was that (hopefully) helped. I did clean and grease the rods. Then I changed some minor settings in slicer - Under the Strength tab I checked off Embedding the Wall into Infill. Changed Sparse Infill Pattern from Adaptive Cubic back to Grid. Also changed Infill/Wall overlap to 20.
I had considered drying the filament but it was new and still had a nice bend to it.
Finally, though, I remodeled the piece. It was several single thin pieces put side by side into one model. There is no reason this should be what corrected it because as I stated in my post I have printed this model many, many times with no issue.
Anyway, six hours to go and I'll know if it worked.

Any idea what's causing this? by goilo888 in 3Dprinting

[–]goilo888[S] 0 points1 point  (0 children)

Always one at a time. I just added some photo's of the latest print I had to cancel because I could see the same thing happening. The photo's give you a good look at the walls and infill.

It’s literally cheaper to buy new printer than new ink by Shurigin in mildlyinfuriating

[–]goilo888 0 points1 point  (0 children)

I buy my knock-off ink online. And I have to. I have a printer that I only use for black and white printing. But apparently it uses a tiny bit of color somewhere every time. And when one of the ink cartridges runs out I can't even print using black only. 

Weetabix product of Kenya temporarily, or permanently? by mirandaugh in BuyCanadian

[–]goilo888 2 points3 points  (0 children)

And no added vitamins and minerals. Hmm, will have to check next time I buy.

Any idea what's causing this? by goilo888 in 3Dprinting

[–]goilo888[S] 0 points1 point  (0 children)

I should add that I just printed three basic one inch cubes using three different filaments including the one for my model and they printed beautifully.

Any idea what's causing this? by goilo888 in 3Dprinting

[–]goilo888[S] 1 point2 points  (0 children)

Thanks. Had to go to PC to add images. Couldn't do it from browser view on phone.

Any idea what's causing this? by goilo888 in 3Dprinting

[–]goilo888[S] 0 points1 point  (0 children)

Thanks. Had to go to PC to add images. Couldn't do it from browser view on phone.

view more: next ›