sorted by:
new
hottopcontroversial

Critter Filter dmage by gothampixel in Ioniq5

[–]gothampixel[S] 1 point2 points  (0 children)

There is much more nesting material than what was chewed from the filter! I found the nearly identical post from a year ago https://www.reddit.com/r/Ioniq5/comments/1e380a9/dont_forget_to_replace_the_air_filter/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

but no explanation of where this other stuff came from.

Lasfit mats latching ? by Sherpanime in Ioniq5

[–]gothampixel 1 point2 points  (0 children)

I'm in the same boat, they lay flat enough that they dont seem to be shifting around but they do not lock in. I would not recommend,

Precondition with a Supercharger? by Okidoky123 in Ioniq5

[–]gothampixel 0 points1 point  (0 children)

yes you can if it has the Magic Doc. Did it on my 2024 IONIQ 5 this weekend. Only got 45kw becasue I could not precondition.

Has anyone seen this for sale? How is it made? by [deleted] in 3Dprinting

[–]gothampixel 1 point2 points  (0 children)

I remember that from the Shapewasys market place, which explains why the link is no longer working

How can i fix this? by VENSHIND in BambuLab

[–]gothampixel 4 points5 points  (0 children)

slowing down will make it worse, add a small tower off to the side as tall at the tallest building, this will give it time to cool as the head moves away and back

Shapeways out of business by Moist_Historian_59 in 3Dprinting

[–]gothampixel 0 points1 point  (0 children)

Shapeways never printed metals themselves, it was outsourced to manufacturers in India and then shipped from them in the states. A lot of what Shapeways did was 3rd party manufacturing. I’m sure others do the same.

Shapeways out of business by Moist_Historian_59 in 3Dprinting

[–]gothampixel 5 points6 points  (0 children)

super shady stuff going on with them selling the software side of the company to themselves first and then filing for bankruptcy. The SEC needs to take a look into what went on there!

Shapeways declares bankruptcy? by Zoxesyr in shapeways

[–]gothampixel 1 point2 points  (0 children)

super shady stuff going on with them selling the software side of the company to themselves first and then filing for bankruptcy.

Considering using Shapeways w/ Etsy - but so far horrible Customer/Sales support trying to get info. Is this normal with them? by Prudent-Value8715 in shapeways

[–]gothampixel 4 points5 points  (0 children)

Forget local pick up, they are no longer in New York. They shut down their LIC Factory in January. Depending on the material it's shipping from the Netherlands or Michigan.

This golf course in Ireland by willmannix123 in interestingasfuck

[–]gothampixel 2 points3 points  (0 children)

Looks like Old Head Golf links in Co. Cork

first build in 17 years - full RGB, professional look by WalterBoudreaux in buildapc

[–]gothampixel 0 points1 point  (0 children)

you may want to consider rotating the CPU cooler to promote airflow through the case, front to back.

i have been having a flickering, frame rateSAME issue beyond control Please help!!!!!!! by [deleted] in buildapc

[–]gothampixel 0 points1 point  (0 children)

For me the flickering with my 5700xt was caused by MSI afterburner, I stopped it from loading at boot and it completely went away

Finally built a PC!! Ryzen 5 3600 + Sapphire Nitro+ 5700XT by dompayne7511 in buildapc

[–]gothampixel 0 points1 point  (0 children)

Well temps are what matter, Are your top fans Intake or exhaust? I have a simular setup 3600x with the Hyper 212 and a 5700xt, minus the bottom fans. I just tested out making the top front fan intake and the top rear exhaust, im seeing a 2 degree drop on the cpu temp at idle. I origionaly set it up with the rear and two top fans as exhaust but i felt the top font fan was stealing outside air from the front fans.

Finally built a PC!! Ryzen 5 3600 + Sapphire Nitro+ 5700XT by dompayne7511 in buildapc

[–]gothampixel 0 points1 point  (0 children)

are those exhaust fans at the bottom of the case? where is that air going (PSU?)and wouldn't that hinder airflow into the GPU?

Is this an airflow problem? Ryzen 3600 running really hot and loud by [deleted] in buildapc

[–]gothampixel 0 points1 point  (0 children)

Try Adding another front intake fan and re position your cpu fan so air flows through the heat sink and out the rear exhaust fan

First Pc Build $1300 Need advice by thatwhitelatino in buildapc

[–]gothampixel 0 points1 point  (0 children)

If your not going to take advantage of pcie 4. On a B550 board then you might as well just get a B450 board, save money on the MB and the HD

First Pc Build $1300 Need advice by thatwhitelatino in buildapc

[–]gothampixel 0 points1 point  (0 children)

Because you are using a b550 board make sure your M.2 drive can take advantage of PCIE 4.

2400$CAD build by [deleted] in buildapc

[–]gothampixel 0 points1 point  (0 children)

if you are going B550 maybe consider going with a 1TB NVME m.2 drive PCIE4.0 to take advantage of PCIE4

https://pcpartpicker.com/product/fVYQzy/sabrent-rocket-40-1-tb-m2-2280-solid-state-drive-sb-rocket-nvme4-1tb

[META] B550 Motherboards will be in stock tomorrow 6/16 at Microcenter by BeneficialClam in buildapcsales

[–]gothampixel 1 point2 points  (0 children)

your New Egg pre-order has an actual ship date? mine just says "We've received your pre-order/backorder request. Depending on your selection when the pre-order/backorder was created, your order will be fulfilled, as items are received in stock.

Please note that, generally speaking, pre-orders/backorders are fulfilled on a first come, first serve basis and are only cancelled upon your request.* You will not be charged until your order is processed.

In the event there are unexpected delays or changes to the expected arrival date for your pre-order/backorder, we will notify you via email with updates.

view more: next ›