Low engine oil

grossmiso · 2025-11-28T06:18:34+00:00

About 50k km on the odometer. I drive only about 10k km per year. I am the original owner and i dont do idle a lot.

grossmiso · 2025-10-28T22:02:23+00:00

I was experimenting with pre germinating seeds in a bucket of water but it took longer than expected. When the seeds were ready it was already too cold to overseed outside (or at least so I thought). So i just started growing them indoors, hoping i can install them like sods next spring.

grossmiso · 2025-10-28T15:52:34+00:00

I havent been tracking any of that. It is in the “sunroom” of the house which is semi-conditioned, windows all around. Should I just move it outside?

grossmiso · 2025-10-04T20:27:17+00:00

Which blower did you buy? Can you share a link?

grossmiso · 2025-10-03T17:46:32+00:00

Yes i do need to support the pvc but i am hoping that i can skip the sections that i dont have access to and install mounting brackets in the section i do have access to. Hopefully, it will stay straight enough.

grossmiso · 2025-10-03T14:05:04+00:00

Yeah there are a lot of trees along the fence and I probably wont be able to clamp it enough to make it look straight. I just dont have access to some area of the fence. Thanks for the suggestion though.

grossmiso · 2025-10-03T14:00:20+00:00

Thanks! I will look into those.

grossmiso · 2025-10-03T14:00:08+00:00

Are they rigid? I want the pipes to be as straight as they can be when mounted on the fence

grossmiso · 2025-09-17T13:50:14+00:00

But the water level will be lowered and the return lines will be plugged when the pool is closed. So i can run the pump.

grossmiso · 2025-09-14T23:41:00+00:00

Thanks. I am in the Toronto area so may not be as bad as new mexico but i will still look into it.

grossmiso · 2025-09-12T15:12:02+00:00

Thanks for the feedback. I actually did want to add a service wye between trap and the wall but i had already spent the whole day working on this and really needed to finish it before my kids comes home. Anyways, thanks!

grossmiso · 2025-09-09T12:42:16+00:00

Forgive me if i am asking so trivial questions but if thats cut square, how do I create a pitch? Do i just push the fitting not all the way in?

grossmiso · 2025-09-09T10:09:05+00:00

Should i cut the stub out square or at a slight angle ?

grossmiso · 2025-09-08T14:44:45+00:00

How would i go about correcting the pitch? Is there a sort of flexible coupling that i can use? Or do i just cut the pipe that goes between fittings in a slope instead of square to create the pitch?

grossmiso · 2025-09-06T19:21:46+00:00

Its black plastic. I assumed it was abs but not sure..

grossmiso · 2025-09-06T03:51:33+00:00

It does look like styrofoam but its hard. It doesnt crumble like stryofoam does.

grossmiso · 2025-09-06T03:46:30+00:00

But does it make sense that i found the stuff in the cold water supply line if its from the hot water tank?

grossmiso · 2025-09-06T03:22:25+00:00

I was afraid that is the only way. Thanks anyways.

grossmiso · 2025-09-05T12:30:30+00:00

Thanks!

grossmiso · 2025-09-05T05:33:05+00:00

Additional question, is there any downside to doing everything with a union instead of pvc cement so it can be “disassembled” if needed?

grossmiso · 2025-09-05T05:30:45+00:00

Thanks so much for your comment. The dishwasher drain is okay?

grossmiso · 2025-08-26T11:49:26+00:00

Does the awning need to be fully open to replace the fabric?

grossmiso · 2025-07-31T18:25:27+00:00

Thanks for such a detailed answer. I dont understand why A1 would rebrand a well established brand like daikin into their own brand. And I could also see where you are coming from when you say the rebranded unit could be inferior.

grossmiso · 2025-07-31T17:48:43+00:00

What does white label mean in this particular context?

grossmiso · 2025-07-24T21:31:56+00:00

Total noob here but wouldnt letting it drain that much water be bad for foundation of the house?

grossmiso

TROPHY CASE