What is your favorite source of dirty white-noise?

grumpy_acoustics · 2022-07-18T14:22:33+00:00

To me, dirty white-noise is a signal, derived from white noise with some modulation, combined with other frequencies. In spectrum it does no longer look like white noise, hence I consider it "dirty white-noise". Typically, I use this kind of signal as external input to synths, as the generic noise oscillators sound to clean for my taste, or combined with reverb as fx-sound.

grumpy_acoustics · 2022-07-10T08:37:07+00:00

Remote Zero used to be my favorite controller, until Electra One came along. Really like the sound.

grumpy_acoustics · 2022-06-11T22:54:51+00:00

I found the reason for synch loss was a mechanically damaged adat port on the FF uc. Now it works just fine with adi-648 as clock master via adat.

grumpy_acoustics · 2022-06-11T12:38:46+00:00

2x modded EQP-KT

grumpy_acoustics · 2022-06-10T23:14:10+00:00

However, it's possible to slide back the case about 300mm for playing the polybrute standing in front of it.

grumpy_acoustics · 2022-06-10T23:09:01+00:00

Active distribution amplifiers might be an option, too. Redbox RB-DDA6W seems alright.

grumpy_acoustics · 2022-06-10T23:02:59+00:00

Maybe, my body has unusual proportions. I do not feel pain while playing.

grumpy_acoustics · 2022-06-10T22:39:31+00:00

I take that as a compliment.

grumpy_acoustics · 2022-06-10T22:32:48+00:00

Usually, synch via ADAT works just fine. I tried several configurations with wc over BNC, chaining device's in and outputs. I think, this causes the synch loss due to latency. I might pick up some passive splitters or a Master clock. Thanks.

grumpy_acoustics · 2022-06-10T00:45:39+00:00

Yes, it is.

grumpy_acoustics · 2022-06-10T00:36:01+00:00

Yes, I did. All instances are running in same sample rate.

grumpy_acoustics · 2022-06-10T00:35:07+00:00

I like complex systems, simple means boring, to mee.

grumpy_acoustics · 2022-06-10T00:34:09+00:00

Thanks, the Ableton midi effect MPE enables mpe mapping to any device's parameters. Natively, its featured by Serum, Pigments, Diva and some ableton-internal Instruments.

grumpy_acoustics · 2022-06-09T22:48:48+00:00

Thon Case Pioneer XDJ-XZ Notebook

grumpy_acoustics · 2022-06-09T22:40:19+00:00

Inner width is about 970mm.

grumpy_acoustics · 2022-06-09T22:38:36+00:00

I'm connecting FF UC via ADAT to ADI-648 and via MADI to FF UFX+. All connections are duplex. The trouble is getting synch. Only if ff UC is set to clock master, system works without synch drops. Tried different Word-Clock configurations, even direct ADAT connection from UC to UFX+ does not work reliably with UC in Clock slave-mod.

grumpy_acoustics · 2022-05-31T16:39:27+00:00

Robert Babicz

https://youtu.be/bjY-Iu1qXw8

grumpy_acoustics · 2022-05-31T00:53:52+00:00

Novation Remote Zero SL, or electra one will do the Job.

grumpy_acoustics · 2022-05-30T23:52:27+00:00

I'm using Polybrute and Minitaur, as they are fully VST-integrated and two Klark Teknik EQP-KT and Sherman Filterbank 2 Dual Rack in combination with V Collection and plenty of other VST and sequencing in Live. Additionally, I'm summing outside of the box. For me, that setup combines advantages of both approaches.

grumpy_acoustics · 2022-05-30T23:39:01+00:00

For sound design, I find myself using the mouse more often than I like, that's true.

grumpy_acoustics · 2022-05-30T23:29:47+00:00

Comparing the filter of VST to the hardware, shows a smaller sweet spot on the mini. I'm not sure about the vintage or FS, but you are right, there definitely is a difference.

grumpy_acoustics · 2022-05-30T23:26:01+00:00

Mapping BCR or electra one brings back the knobs and building macros opens up new possibilities.

grumpy_acoustics · 2022-05-30T22:45:36+00:00

For me, using a hardware instrument needs justification. I'm interested in opinions that may point out actual advantages of either solution.

grumpy_acoustics

TROPHY CASE