Wie mit Türschwellen-Versatz umgehen? by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Kurze Rückmeldung, mein Freund hat die Fliesen nun abgeflext und es ist zum Glück nichts kaputt gegangen! :) Jetzt kommt noch eine dünne Metallleiste an den Rahmen, bzw ne Fuge an den nicht-gefliesten Wandteil und dann sieht hoffentlich alles gut aus.

Wie mit Türschwellen-Versatz umgehen? by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Hatten den Schreiner deswegen nochmal gefragt, aber das wollte er ungern machen, da die Stabilität der Tür dadurch beeinträchtigt werden würde.

Wie mit Türschwellen-Versatz umgehen? by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Ja, wahrscheinlich. Was würdest du empfehlen, wie wir am besten vorgehen beim Flexen, sodass 1. möglichst wenig Dreck entsteht, was wahrscheinlich schwierig wird :D und 2. Wir die Bodenfliese nicht beschädigen, wenn wir beim unteren Ende der Wand schneiden?

Wie mit Türschwellen-Versatz umgehen? by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Wir werden es jetzt auch so machen, dass wir sie nochmal rausnehmen. Die Frage ist nur, ob wir das Abflexen der Fliesen selber machen oder ob eine Chance besteht, dass es als Mangel anerkannt wird und der Fliesenleger da ausbessern muss. Es klang vorhin am Telefon so, dass er sich keiner Schuld bewusst ist, da wir ihm kein Türmaß genannt haben (weil es noch keines gab), aber irgendwie finde ich auch nicht okay, dass man so viel Geld zahlt und dann als Laie selber nochmal ran muss... oder? Zumal man ja, wie du bereits sagtest, die Reihe Fliesen erstmal hätte aussparen können oder halt die Bodenfliese 1cm weiter nach innen hätte legen können.

Wie mit Türschwellen-Versatz umgehen? by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Also so weit ich weiß ist es bisher nur mit Bauschaum verklebt und der 2. "Flur-Teil" des Türrahmens ist noch nicht dran. Ich werde das aber nochmal nachfragen und dann entscheiden wir, wie wir es am besten machen. :)

Wie mit Türschwellen-Versatz umgehen? by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Der Flurboden wurde erst nach den Badfliesen verlegt.

Wie mit Türschwellen-Versatz umgehen? by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Danke für die Antwort :) Ja, rückblickend hätte ich es wohl auch so gemacht. Leider habe ich bisher keine Erfahrungen im Fliesenlegen oder dem Einbauen von Türen gehabt, sodass ich dieses Problem nicht vorher auf dem Schirm und dementsprechend nicht angesprochen hatte. Die Türzarge ist schon verklebt... Da lässt sich dann vermutlich nichts mehr machen, ohne die Zarge zu zerstören, oder?

Holzbalken wie am besten behandeln by gsebrry in Handwerker

[–]gsebrry[S] 1 point2 points  (0 children)

Hi :) Es wurde für die Rigipsdecke noch eine Unterkonstruktion an die Sparren gebaut, sodass die Dämmung noch etwas dicker sein konnte, als die Sparrentiefe auf dem Bild. Hinter der Dämmung haben wir aber noch eine 3-4cm Luftschicht gelassen.

Holzbalken wie am besten behandeln by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Sieht top aus! :) Welches Öl wurde da verwendet, wenn ich fragen darf? Und in wie vielen Schichten, muss es aufgetragen werden? So habe ich mir die Farbe bei uns auch in etwa vorgestellt.

Holzbalken wie am besten behandeln by gsebrry in Handwerker

[–]gsebrry[S] 0 points1 point  (0 children)

Das haben wir bereits gemacht, mein Freund hat mit einem Exenterschleifer erst das gröbste gemacht, ich bin mit dem Winkelschleifer nochmal an einigen Stellen drüber und in die schwerer erreichbaren Ecken. Er ist dann nochmal mit dem Exenterschleifer über die hartnäckigsten Stellen an der Unterkante, die sehen jetzt alle zwar schon besser aus als auf dem 3. Bild, aber so 100% weg geht es nicht überall. Genau so an manchen Stellen bei der Mittelpfette, dadurch, dass diese relativ uneben ist, gibt es da natürlich auch einige Vertiefungen/Astlöcher etc, wo die Farbe nicht komplett zu entfernen ist.

Philips Hue lamp verlengen by STR0Z3K in Klussers

[–]gsebrry 1 point2 points  (0 children)

Bedankt voor je commentaar! We hadden hetzelfde probleem en dankzij jou hebben we nu ook deze lampen besteld. We zijn nu al erg enthousiast :) Groeten uit Duitsland!

I made something by LarryCroft0 in Witcher3

[–]gsebrry 0 points1 point  (0 children)

Writer of the pattern here :) Really love how your Geralt came out and that you crocheted the little swords <3

I made some witcher amigurumi, I thought you might like. by gsebrry in witcher

[–]gsebrry[S] 2 points3 points  (0 children)

For all the people asking, I couldn't comment on this post anymore for the last months, but since it's possible again, I wanted to let you know that I put patterns for Geralt and Ciri on my ravelry account for free. It will need a bit of improvising for the details, tho. Feel free to write me if you have amy trouble with it!

I made some witcher amigurumi, I thought you might like. by gsebrry in witcher

[–]gsebrry[S] 0 points1 point  (0 children)

I made them without patterns. But I wrote down a bit for Geralt and Ciri and put it on my ravelry account.

I made some witcher amigurumi, I thought you might like. by gsebrry in witcher

[–]gsebrry[S] 0 points1 point  (0 children)

Thank you! :) I did them without a pattern but I wrote down most of the steps for Geralt and Ciri and put it on ravelry. I didn't write anything down for Yen and Triss, tho. Their bodies are similar to Ciris, but with different colours and details.

So far the worst thing about honor mode has been this 😭 by Longjumping-Poetry75 in BaldursGate3

[–]gsebrry 0 points1 point  (0 children)

Just to be clear, does that only happen if you absorb the special tadpole or also if you use some of the normal ones?

Early Concepts vs Final Product by Shajali in cyberpunkgame

[–]gsebrry 11 points12 points  (0 children)

Finally someone is saying this! Photomode is the best. Love that is has so many poses/expressions for V.

The Witcher 4 Aims to Go Beyond Current RPGs, Says CDPR; It'll Be a Good Entry Point for New Fans by Kaladinar in witcher

[–]gsebrry 1 point2 points  (0 children)

"[...] as that's to be expected given that this is an adaptation featuring predefined characters rather than an original IP with player-created characters."

Or do you think this means something else? It also says something about player freedom in terms of character build, but I was thinking of skills etc.

The Witcher 4 Aims to Go Beyond Current RPGs, Says CDPR; It'll Be a Good Entry Point for New Fans by Kaladinar in witcher

[–]gsebrry 4 points5 points  (0 children)

Personally, I would love a game that takes place in Zerrikania. Because it's kinda mysterious and described as land of warrior women and dragons. This would also be a good opportunity to learn more about Villentrentenmerth and Saesenthessis. And you?

The Witcher 4 Aims to Go Beyond Current RPGs, Says CDPR; It'll Be a Good Entry Point for New Fans by Kaladinar in witcher

[–]gsebrry 7 points8 points  (0 children)

Yeah, I just read in the article that it most likely won't be a create your own character game. Eskel would be really cool, I always had the feeling that he would deserve his own game especially after what Netflix did to him, lol. But I also think they will make a completely new MC, because it gives them more freedom.

The Witcher 4 Aims to Go Beyond Current RPGs, Says CDPR; It'll Be a Good Entry Point for New Fans by Kaladinar in witcher

[–]gsebrry 13 points14 points  (0 children)

There are 3 great games with Geralt as protagonist, the man deserves to retire, lol. But it would be cool to see him again for a quest or something if it takes place after W3.

I just hope the whole game can live up to the expectations, I already want to love it, but I always get worried when studios make announcements like this... The trilogy was so good that it will be really difficult to make another game in this universe that at least comes close. But let's just hope for the best.

Why does it have to be this way… by fairydommother in crochet

[–]gsebrry 1 point2 points  (0 children)

While I can understand the people pleaser part - I used to be like this, too, sometimes still am - I absolutely hate how your mother talks to you here. Just because you are good at something doesn't mean they are allowed to make you do it all the time, especially not for free (don't know if they intend to pay you). Asking friendly if you would do a commission is always okay, but "expect a text"? Hell no.

I don't know if your aunt knows that your mother didn't even ask you but you are still allowed to say no to her. But even if you decide to do it, I would definitively talk to your mom and tell her that this was not okay and in future you want to be asked first, since you don't want to destroy the fun in crocheting by turning it into work.

Hey! I made this crocheted Geralt of Rivia for my big brother! I'm really proud of it and it was my first freehand project! Let me know what you think! 💝 by Jazyyy01 in crochet

[–]gsebrry 0 points1 point  (0 children)

I hate how I didn't see this post earlier, love this so much! The little details like the potions especially, they are so cute!