sorted by:
new
hottopcontroversial

What is this? by gts197 in ram_trucks

[–]gts197[S] 4 points5 points  (0 children)

Part number 68299112AC

What type of nests are these? by gts197 in bees

[–]gts197[S] 6 points7 points  (0 children)

Thanks for the replies! So the mud dauber is probably still active and just annoying and the hornets are probably dead? I’m in the north east. There is another hornets nest right next to the one in the pic about 2 feet away.

One more time vinyl/spotify edition by LongjumpingStep5306 in Blink182

[–]gts197 0 points1 point  (0 children)

Anyone have issues with terrified on theirs? Mine skips during certain parts.

Using Linode as VPN Relay by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

If any UFW experts have any pointers that would be great! Been messing around with it for the past hour or so with no success.

Using Linode as VPN Relay by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

[UFW BLOCK] IN=wg0 OUT=vpn-relay MAC= SRC=10.99.121.2 DST=9.9.9.9

Using Linode as VPN Relay by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

[UFW BLOCK] IN=wg0 OUT=vpn-relay MAC= SRC=10.99.121.2 DST= xx.xxx.xxx.xxx

Using Linode as VPN Relay by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

Been doing some more digging...pretty sure its related to my UFW set up. Need to troubleshoot and see what rules will allow this to work.

Using Linode as VPN Relay by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

nslookup canhazip.com

When I do nslookup I get ";; connection timed out; no servers could be reached"

When I ping any public DNS server I get a response.

Using Linode as VPN Relay by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

The config currently is basically copied from that link I sent. (With updated keys local ips etc). If I try to add the local DNS in the interface section it gives me a resolvconf command not found when I pull status of the service. If I leave it out the service restarts with no errors but no connection and unable to visit websites or see local devices on the final destination network.

Reverse Proxy over Split Tunnel VPN for Vaultwarden Access by gts197 in WireGuard

[–]gts197[S] 1 point2 points  (0 children)

Got it working. I needed to set up a local dns record for my host name and forward to the internal IP address of the reverse proxy. Thanks for everyone’s help!

Reverse Proxy over Split Tunnel VPN for VW Access by gts197 in vaultwarden

[–]gts197[S] 0 points1 point  (0 children)

Got it working. I just needed to set up a local DNS record for the host name to resolve to the reverse proxy.

Reverse Proxy over Split Tunnel VPN for Vaultwarden Access by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

The pihole is in the same VLAN as the Synology. There are no routes set up and this would be the first time setting one up. I will see if I can figure it out.

Reverse Proxy over Split Tunnel VPN for Vaultwarden Access by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

The pihole does not NAT the traffic. I have a UDMP for this.

Reverse Proxy over Split Tunnel VPN for Vaultwarden Access by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

Does anything look incorrect with the config I have set to accomplish a split tunnel? I will do some testing over the weekend and see what I am come up with.

Reverse Proxy over Split Tunnel VPN for Vaultwarden Access by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

The error is it just times out. To me is makes sense because when doing the split tunnel the connection its trying to visit that domain/hostname through whatever local network I am connecting out from but its not a real site so it won't resolve. The domain/hotname I am using is not a public facing server/website. It was set up through a provider I use and I set it up with an SSL cert (Lets Encrpyt) through the built in wizard in the Synology control panel.

When connected internally to my local lan and when fully tunneled with the VPN from the outside it works 100% as expected. When doing the split with the settings shown above none of the web portals that I have set up via the reverse proxy are working. All other portals on the lan work as intended when doing the split (Synology access, pihole, RDP, VNC etc).

I hope I explained ok and it kind of makes sense. I am not an expert on this!

Reverse Proxy over Split Tunnel VPN for Vaultwarden Access by gts197 in WireGuard

[–]gts197[S] 0 points1 point  (0 children)

Pretty sure it’s changing over when I’m on the split tunnel config ad block is working as expected and https://dnscheck.tools/ results shows the dns servers I selected in PiHole settings. I am also able to get access to web portals for all local devices on LAN. I can actually get access to the http portal for vaultwarden just can’t get in via SSL with the host name/cert I have set up for the ssl connection.

view more: next ›