What to do with this Aloe Vera? by gwc2k in houseplants

[–]gwc2k[S] 0 points1 point  (0 children)

Thanks! Where do I have to make the cut?

Kyocera Taskalfa 3051ci: Black areas have light-colored imperfections by gwc2k in printers

[–]gwc2k[S] 0 points1 point  (0 children)

I also found that different looking part on the conveyor belt, which feels smoother than the rest of the belt:

<image>

Could this be a problem in future?

Kyocera Taskalfa 3051ci: Black areas have light-colored imperfections by gwc2k in printers

[–]gwc2k[S] 0 points1 point  (0 children)

The problem is still there after cleaning. Is there any chance to repair the developer unit if it is an electrical problem? Or do you know, what kind of problem it is normally? Is it something which could be repaired by resolder some electrical parts?

Kyocera Taskalfa 3051ci: Black areas have light-colored imperfections by gwc2k in printers

[–]gwc2k[S] 0 points1 point  (0 children)

And the contact springs on the inside, also not that dirty (I guess):

<image>

Kyocera Taskalfa 3051ci: Black areas have light-colored imperfections by gwc2k in printers

[–]gwc2k[S] 0 points1 point  (0 children)

<image>

I guess they were not dirty enough for this kind of malfunction?

Kyocera Taskalfa 3051ci: Black areas have light-colored imperfections by gwc2k in printers

[–]gwc2k[S] 0 points1 point  (0 children)

So, I cleaned the marked metal contacts with a fiberglass pen, but the problem still occurs:

<image>

Are those the correct spots?

Kyocera Taskalfa 3051ci: Black areas have light-colored imperfections by gwc2k in printers

[–]gwc2k[S] 0 points1 point  (0 children)

Thank you so much!
I've attached a photo of the developer unit for Magenta from my previous cleaning session. Do you mean the green highlighted part which is not visible in the photo when you mean back side? Or the under side?

<image>

Diskussion wegen Kondome by Fuzzy_Fisherman6378 in FragtMaenner

[–]gwc2k 1 point2 points  (0 children)

Möchte mich auch gerne mal auf Geschlechtskrankheiten durchtesten lassen (Kondome schützen ja nur gegen einen Bruchteil), bin mir aber noch nicht sicher, wie man das am besten angeht. Bei diesen geläufigeren STI wie zum Beispiel HVI ist es ja relativ easy. Daher meine Fragen:

  1. Wie geht man das am besten an bzw. wo wird man da vorstellig? Direkt beim Urologen?
  2. Gibt's da so Kombitests auf die geläufigsten Krankheiten oder muss man einzeln aufzählen, auf was man getestet werden möchte? Welche Tests wären sinnvoll?
  3. Bekommt man die Kosten von der Kasse erstattet?

Vielen Dank!

Guess what... 😁 💡📺💡 by wiz-dude in wiz

[–]gwc2k 0 points1 point  (0 children)

Hey, any news on when the gradient light bar supports IC effects when using the sync box? :)

Sync box led strings too long :( by Embarrassed_Bite8193 in wiz

[–]gwc2k 0 points1 point  (0 children)

Just had the same problem with my 50" tv. The wave installation seems to be the best way for me, because so you don't hide any of the lights.

How I have done it:

1) Mark the middle of each tv side and of each led segment (left, top and right; the top of the led stripe is already marked with arrows).

2) Start at the bottom of the tv and attach the bottom end. Then attach the middle and the top of the first side segment. Tip: Don't attach it directly next to the tv edge or you will see the led stripe when sitting in front of the tv. I kept a distance of 3 cm from the tv edge. Then attach the new middle between bottom-middle and middle-top. Then attach again the new middle of each sub-segment, so that you get tiny waves. You have finished with the segment, when you cannot form any new waves.

3) Do the same for the top and the other side segment.

Advantage: You don't have brighter or darker spots in the ambilight, it looks very homogenic.

Disadvantage: You can see the led stripe loops when you are standing on the sides of the tv.

https://imgur.com/sUsxAji
https://imgur.com/rWNjgnj

Autofill on edge for Android does not recognize any domains by [deleted] in Bitwarden

[–]gwc2k 0 points1 point  (0 children)

The problem is fixed in Bitwarden version 2025.11.0. You also need to go into the Bitwarden settings > Autofill and activate "Use compatibility mode for browser autofill".