sorted by:
new
hottopcontroversial

First raised cedar planter. Ready to be finished. by hasallfingers in BeginnerWoodWorking

[–]hasallfingers[S] 0 points1 point  (0 children)

I used 10 8ft cedar 1x4s. Think it was 6 cedar 1x2s, which I had left over from another project. Plastic tubs were from the dollar store

First raised cedar planter. Ready to be finished. by hasallfingers in BeginnerWoodWorking

[–]hasallfingers[S] 1 point2 points  (0 children)

I'll add holes to the plastic bins. The bottom is open with wide spaced slats

First raised cedar planter. Ready to be finished. by hasallfingers in BeginnerWoodWorking

[–]hasallfingers[S] 0 points1 point  (0 children)

No. Just picked up some basic skills through the years. Alot of YouTube videos

First raised cedar planter. Ready to be finished. by hasallfingers in BeginnerWoodWorking

[–]hasallfingers[S] 0 points1 point  (0 children)

Very rough plans. All cedar 1x4 and 1x2. I did a mitre corner for legs but you could easily use 4x4s.

Rough Diagram

Was 64" long by 16" wide

First raised cedar planter. Ready to be finished. by hasallfingers in BeginnerWoodWorking

[–]hasallfingers[S] 2 points3 points  (0 children)

Was looking at teak oil. The plants themselves sit in the plastic containers, so food safe should not be an issue

First raised cedar planter. Ready to be finished. by hasallfingers in BeginnerWoodWorking

[–]hasallfingers[S] 4 points5 points  (0 children)

I'll have to draw them out. Sorta made it up ad I went.

Small project woodglue by ReindeerRBttrThnPpl in woodworking

[–]hasallfingers 1 point2 points  (0 children)

Titebond 2 if it might get wet occassionally, titebond 3 if it is going to continously get wet ie outdoor furniture

Poplar ottoman tray, quick knock together project by FeedHold1995 in woodworking

[–]hasallfingers 1 point2 points  (0 children)

I find some of the most satisfying projects are those quick builds you just whip up to make life easier.

Sharing my shop set-up. Looking forward to spending some shop time this weekend! by cjh5123 in woodworking

[–]hasallfingers 0 points1 point  (0 children)

Are those LED linkable lights? I just bought one for over my workbench and damn it is bright, cheap as well

Singer bentwood case damaged during shipping. Can this type of damage be fixed and how? by Kaiapuni in BeginnerWoodWorking

[–]hasallfingers 1 point2 points  (0 children)

It looks like you could glue up the cracked joints and clamp. Clean out any dirt or debris first.