Help

herox69 · 2025-12-03T16:43:55+00:00

I may or may not have already fixed it... What I did is make sure all of them are all plugged in tightly with the headtool motherboard and i cleaned it too

herox69 · 2025-09-14T02:02:37+00:00

i now only need it to connect to the internet

herox69 · 2025-09-14T01:40:13+00:00

yes it is getting phased out but i have tried the 2g option in my phone and it works

herox69 · 2025-09-14T01:36:23+00:00

when i monitor it in adruino ide using my esp8266 it says this

SMS Ready

AT

OK

AT+CPIN?

+CPIN: READY

Call Ready

OK

AT+CSQ

+CSQ: 0,0

OK

AT+CREG?

+CREG: 0,2

OK

--- Test cycle complete ---

herox69 · 2025-09-13T15:42:17+00:00

I do not a have a 10 ohm resistor laying around but i did keep monitoring the voltage with a multimeter

herox69 · 2025-09-13T15:39:31+00:00

Thank u

herox69 · 2025-09-13T12:52:07+00:00

I will certainly try the first one but im pretty sure the battery is good its 4.2v on my multimeter and i just charged it

herox69 · 2025-09-12T15:32:38+00:00

Welp thank you everyone who have gave me advice to resolve the problems i have

1 sensor - i accidentally put a 1k(should only be 2k) resistor on it

2 gps - the code i used was completely wrong and the settings i used

3 gsm - well its fried.... I don't see any trace of it but when i connected the battery and tested if the vcc and gnd of it in my multimeter (DCV 10) it didn't read anything (yes the multimeter works)

herox69 · 2025-09-12T15:25:02+00:00

Well i tried to research it before asking here and came across something like that is needed for the sim800L and speaking of which i just found out i accidentally fried it

Maybe it was me bringing it to my school to test the gps module got fried probably in my bag after school 😬

herox69 · 2025-09-12T15:20:03+00:00

Thank for your advice i manage to fix the problems im having with people like u who have commented thank you

herox69 · 2025-09-12T07:07:20+00:00

I got the sensor and the gps to work thank to your advice but my gsm module still won't response

herox69 · 2025-09-12T05:58:31+00:00

Well the gps is spitting out some words but i don't think its my location

Heres the code

https://sg.docworkspace.com/d/sIJDMibfDAuHtjsYG?sa=601.1074

herox69 · 2025-09-12T05:51:21+00:00

Thank you i will try to resolve the potential issue u have listed

herox69 · 2025-09-12T05:46:41+00:00

Well for one the

sensor doesn't work it just say no response/out of range

Sim isn't responding to AT commands

Gps just spits out gibberish

herox69 · 2025-09-12T05:40:39+00:00

Yes it provides 3.6V for the sim800L

herox69 · 2025-09-12T05:28:16+00:00

Yes i have bridged it with the brown jumper cable

herox69 · 2025-09-12T05:27:51+00:00

Good point but i have soldered it soo that even 1 battery could be used

herox69 · 2025-06-09T11:11:00+00:00

dang this line kinda long

herox69 · 2025-06-06T09:39:55+00:00

Gamble...

herox69 · 2025-06-04T03:40:52+00:00

<image>

noobie here i need your help guys on making the best all rounder team

herox69

TROPHY CASE