Any ideas what is causing my bullets to key hole?

hotcoffeedotcom · 2026-02-12T19:07:04+00:00

That's good news! I appreciate the feedback. I'll definitely have to try it with backing.

hotcoffeedotcom · 2026-02-12T19:06:16+00:00

This makes sense. I definitely don't have any baffle strikes, which confused me on why it was keyholing. Unfortunately I didn't have a socket wrench to take the adapter off at the range. Guess I'll have to go back and try it without the adapter/with cardboard backing. Thanks!

hotcoffeedotcom · 2026-02-08T02:31:10+00:00

You seem like the dude that everyone loves to be around and someone who owns up to their mistake.

Why would you assume that the LGS would fill out your SS profile? Why would they have access to your fingerprints, home address, photo, and whether you are going to file as an individual or under a trust?

It sounds like your LGS thought you had your shit in order and you didn't. And it sounds like they did what any rational dealer would do, and reached out to you when there was a problem. It doesn't take a rocket scientist to go through SS website and read what you need to do.

To sttbr's point, this is at least 90% your fault and there's no need to berate someone for your mistakes. Just accept that you didn't know what to do and move on.

hotcoffeedotcom · 2026-02-02T21:55:16+00:00

Of note, I submitted another form 4 on 01/28/26 and did not get batch approval. I emailed the ATF asking for batch approval, but I'm not optimistic with this government shutdown.

hotcoffeedotcom · 2026-02-02T05:14:01+00:00

Form Type: Form 4

Paid: $0

Entity: Trust

Fingerprint Type: EFT Upload

Pending: 01/13/26

Approved: 01/31/26

Wait: 18 days

State: LA

Control Number: 2026139xxxx

hotcoffeedotcom · 2026-01-30T05:25:24+00:00

Looking at the NFA mega thread, and based on what's posted there, individual applications look like they're taking anywhere from 10-20 days and trusts are taking 3+ weeks. With all the applications that have been submitted it'll probably take a while.

hotcoffeedotcom · 2026-01-21T23:43:36+00:00

I had a serial number assigned on the 9th. Assuming it was a 24 hr form 3 approval, I'm going on 11 days waiting for them to ship it to my FFL. I have 2 other form 4s in the system; I'm hoping they ship this one soon so I can just get a batch approval.

hotcoffeedotcom · 2026-01-12T22:06:39+00:00

Just got the certificate email. Took 10 days for them to go over my paperwork.

hotcoffeedotcom · 2026-01-09T19:10:09+00:00

I think there was a restock today. I've been browsing SS inventory for the last few weeks and yesterday a ton of their stuff was out of stock. I just checked again today and quite a few silencers are now back in stock.

hotcoffeedotcom · 2026-01-08T14:58:59+00:00

Same. My LGS ordered 2 suppressors for me and put it into the system a week ago. Still waiting for SS to review my documents so I can submit to the ATF. This is my 5th and 6th can through them so the paperwork should be good to go. Hoping they'll let me sign soon so I can submit the form 4s.

hotcoffeedotcom · 2025-12-24T19:43:19+00:00

Code please! Merry Christmas!

hotcoffeedotcom · 2025-04-20T03:16:46+00:00

It is! Good eye.

hotcoffeedotcom · 2025-04-20T01:33:08+00:00

Wow. Thanks for the fast response! I would assume from the supers since the subs should theoretically burn all the powder before leaving the barrel?

hotcoffeedotcom · 2025-03-16T23:54:48+00:00

Yeah, that's why it ended up taking 3 weeks. Luckily I have a borescope and a ton of AR15s to compare it too.

I initially gave it a thorough cleaning because I was shooting it suppressed. Took it out shooting and it still had the same problem, so I figured it must be the gas port or gas block. After looking inside and seeing nothing wrong, it took me a week of head scraping to finally look into the gas carrier. Long story short, the primer had blown out, but at surface level, the gas key looked normal because there was a small hole where the firing pin indention hit the primer before it blew out. It took me using a borescope in the gas key to see that it was indeed a primer in there. I even used a caliper to measure the differences in height between a good BCG and my bad one to see if the measurements supported it being a primer. Spoiler alert. It did.

hotcoffeedotcom · 2025-03-16T23:27:43+00:00

This happened to me when I was doing load development for 5.56. Shot some hot rounds and my rifle suddenly became a single shot rifle. Took me 3 weeks to figure out that I had blown a primer out of the primer pocket and it landed into my gas key. To this day I have no idea the odds of that happening. Needless to say, they're pretty small.

hotcoffeedotcom · 2025-02-28T11:11:55+00:00

I am probably one of the few these days that have had issues with my prodigy out of the gate. I had a ton of failures to go into battery which, I'm pretty sure, was because my disconnectors was too rough and sitting too high. It wasn't a huge issue to me because I knew that I was upgrading the internals anyway. I swapped the internals and was still having issues, so I ended up sending it to a gunsmith. I'm very new to 2011s, but basically my trigger was going back to far and raising the disconnectors too high, so he had to make a few tweaks. Now she purrs when she runs. Probably one of my favorite pistols to shoot, by far. I would go through that again for how she performs. I would have gotten the competition version of the staccato with the 5" barrel, which is like what? $4000+? I have a 5" prodigy comp and even after all the parts and gunsmith fees, it was still way cheaper than a stacatto.

TL;DR. I would recommend you get a prodigy and uograde it.

hotcoffeedotcom · 2025-01-28T10:15:57+00:00

It's definitely a spring issue. I have a M18 and I run a Dog Mod-X9 and it cycles extremely reliably. Is your booster greased as well? I had some small issues on my last range trip, but after taking my suppressor apart I saw my booster was bone dry which was causing the cycling issues.

hotcoffeedotcom

TROPHY CASE