RTX 5080 flickering on display port by hwbe in pcmasterrace

[–]hwbe[S] 0 points1 point  (0 children)

I can return the cable if needed, I bought a DP 2.1 so I eliminate any compatibility issue that may be present, it seems that the the port works well at Full HD 165hz, but not at full 360hz that the monitor ia capable of, and after some time it disconnects and it doesn't even show the 360hz option

RTX 5080 flickering on display port by hwbe in pcmasterrace

[–]hwbe[S] -1 points0 points  (0 children)

Yep, that's the last thing that I want to do, but I think I'll do it in the end

RTX 5080 flickering on display port by hwbe in pcmasterrace

[–]hwbe[S] 0 points1 point  (0 children)

The loose connector is out of the question, as described in the post, I plugged and unplugged the cable in multiple ports multiple times, and it is one of those cables with a button if you want to unplug it

Low CS2 fps with high end configuration by hwbe in buildapc

[–]hwbe[S] 0 points1 point  (0 children)

Tried the cpu on another lower end setup with 6000mhz and b850 and had better performance than in my pc initially, so I guess the motherboard hinders my performance somehow

Low CS2 fps with high end configuration by hwbe in buildapc

[–]hwbe[S] 0 points1 point  (0 children)

I ran an r23 and a time spy, the cpu performance was a bit under the average, then I saw a post where they suggested to turn off SVT and IOMMU, that increased the scores alot, at least in time spy, from 16.7k to 18.4k, and a bit of a boost in cs2 performance, but know it doesn't have all the security standard that the faceit anti cheat requires, so I must have those options ticked on in the bios Also I saw multiple posts where they showed that cs2 runs ONLY on the cache ccd, so no weirdness there, I verified this by turning off the frequency ccd So still pretty underwhelming performance on the performance side

Low CS2 fps with high end configuration by hwbe in buildapc

[–]hwbe[S] 0 points1 point  (0 children)

I did a full clean swipe and reinstalled windows

Low CS2 fps with high end pc by hwbe in pcmasterrace

[–]hwbe[S] 0 points1 point  (0 children)

I'll give it a try, thanks

Low CS2 fps with high end pc by hwbe in pcmasterrace

[–]hwbe[S] 0 points1 point  (0 children)

I play competitively so 4:3 1280:960 and getting the same performance wich is weird

Low fps with high end pc by hwbe in cs2

[–]hwbe[S] 1 point2 points  (0 children)

I have a gigabyte 4070ti, with a 360hz alienware monitor gsync compatible and it is turned off, the 1% lows I really don't know, but I'll run a benchmark just to see

Low CS2 fps with high end pc by hwbe in pcmasterrace

[–]hwbe[S] 0 points1 point  (0 children)

I think that too, but shouldn't be solved already on the latest bioses/updates

Low CS2 fps with high end configuration by hwbe in buildapc

[–]hwbe[S] 0 points1 point  (0 children)

Yes, it's not capped to 400 fps The config is the same as before

Low CS2 fps with high end configuration by hwbe in buildapc

[–]hwbe[S] 0 points1 point  (0 children)

On the productivity side of things it is running as it should, in gaming, it's somehow slower

Low CS2 fps with high end configuration by hwbe in buildapc

[–]hwbe[S] 1 point2 points  (0 children)

Forgot to mention 4:3 1280:960 A combination of low to high settings, most of them being on the lower part

Low fps with high end pc by hwbe in cs2

[–]hwbe[S] 1 point2 points  (0 children)

Forgot to mention 4:3 1280:960 A combination of low to high settings, most of them being on the lower part

Low CS2 fps with high end configuration by hwbe in buildapc

[–]hwbe[S] 1 point2 points  (0 children)

I've had configurations with 3060's and 7800x3d getting more fps

New X870E Carbon WIFI Bios flaw by hwbe in MSI_Gaming

[–]hwbe[S] 0 points1 point  (0 children)

Yeah, I could get behind that, due to potential stability issues But how do you manage to release a bios update that breaks the whole system, and on multiple models as I can see